More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are available with corrosion-resistant finishes.

18-8 stainless steel screws have good chemical resistance.

These steel screws have a black-oxide finish to resist corrosion in dry environments.

Install and remove these screws with a tamper-resistant spanner driver.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

Made from 18-8 stainless steel, these screws are chemical resistant.

These steel screws save you time and effort by drilling their own holes and fastening in a single operation.

A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.

18-8 stainless steel screws have good chemical resistance.

Brass screws are corrosion resistant in wet environments and electrically conductive.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

With more points of contact than Phillips-, slotted-, and square-drive screws, you can firmly press these Torx-drive screws into wood without stripping them or damaging the recess—their threads create a tight hold.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Also known as deck screws, these Phillips screws have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material.

Often used for drawer slides and cabinet hardware, these screws—also known as Euro and Type B screws—create a strong hold in small, shallow holes in wood.

These steel screws are beveled under the head for use in countersunk holes.

Alternating high and low threads minimize driving torque and allow the screw to hold more material between threads for a stronger hold and better strip-resistance than standard drywall screws for wood.

Power through drywall and into metal studs up to 0.105" thick.

Hold sheets of drywall together until glue sets