Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.

Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.

Transfer harsh chemicals while reducing vibration that could damage pumps or other equipment.

Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.

The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.

If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.

Often found in semiconductor manufacturing and other demanding industrial applications, this hose handles nearly perfect vacuum.

To maintain the temperature of liquids as cold as -325° F, this hose has vacuum insulation and a reflective barrier. This prevents heat transfer in the same way a thermos does, so the exterior of the hose won’t freeze or form condensation. Thread the fittings on this hose onto a freezer or other equipment in your plant or laboratory.

Instead of a rubber cover, this hose has a stainless steel braid for excellent strength in high-pressure applications.

With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing.

This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1,900 psi.

This tubing has special markings to identify it as a gas line.

This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.

This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.

The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.

Move bulk material, exhaust gas, or suck up dust in powerful vacuum systems—this tubing is large enough to transfer pellets and debris and strong enough to withstand nearly perfect vacuum. Made of aluminum, it’s lighter weight than steel tubing, so it’s best when you need to reduce the weight of your system. It also resists corrosion from frequent rinsing, humidity, and rain.

Commonly used in marine applications, this tubing contains magnesium for extra corrosion resistance.

Tubing is welded with a smoothed weld bead on the inside to reduce particle buildup. It is also known as DOM (drawn over mandrel) tubing.

With the lowest OD tolerance of all our steel tubing, this tubing is designed for precision applications.

This tubing won't degrade, even when used with harsh acids. It is also known as Monel.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

Protect fiber optic cable with this small-diameter conduit.

Join pieces of conduit.

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Transition between types of conduit.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Insulate your wire, cable, and hose in continuous temperatures up to 400° F and easily access them. This sleeving opens anywhere along its length with a hook-and-loop strip.