Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.

Transfer harsh chemicals while reducing vibration that could damage pumps or other equipment.

More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. To save you time, it comes with male threaded fittings already attached.

Form elbows and bends with this hose and it will hold its shape without support.

With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.

Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.

Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

Hose meets UL 94 V-2 for flame retardance.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Position this hose in any direction and it will hold its shape.

The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.

Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).

Hose has a plastic spiral that acts as a wear strip to protect against damage.

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

This white hose makes dirt and other contaminants easy to spot.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Super thin and lightweight, this hose is economical and rolls up for easy disposal.

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.

Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.

A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.

A smooth interior allows for unrestricted flow and makes this hose easy to clean.

Run water, mist, oil, and other liquids through this hose.

This general purpose tubing is the industry standard for air and water applications.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Commonly used in ice machines and other water applications, this tubing is treated to protect against degradation caused by bacteria, yeast, fungi, and mold.

Use this tubing in high-temperature applications up to 390° F.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

With a unique combination of UV resistance and clarity, this tubing won’t degrade from the damaging effects of ultraviolet light exposure, and allows you to monitor flow through the line.

Use this micro-sized tubing for delicate, precision applications.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

An inner liner releases silver ions to inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

To protect sensitive equipment, this tubing is made of nylon that’s specially formulated to let currents pass through, preventing static electricity buildup.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.

Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

This tubing can withstand high-temperature chemical applications up to 400° F.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Conductive material embedded in the walls lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Sized for vibrating sifters, screeners, hoppers, and packaging equipment, this tubing has a diameter of 4" or larger to handle a variety of bulk food processing applications.

Tough and durable, this tubing resists abrasion and tearing.