Brass Float Valve Bodies

Filter by

Inlet Pipe Size

Material

For Use With

Inlet Gender

Outlet Pipe Size

Pipe Size

Maximum Temperature

Seal Material

Viton® Fluoroelastomer

Outlet Connection Port

Outlet Gender

Maximum Pressure

Plunger Type

Plunger Texture

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Not Compliant

RoHS

Compliant with Exemptions

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Plunger Material

Gender

Flow Rate @ Pressure

Thread Size

Rod Thread Size

Discharge Slot Length

Discharge Slot Width

Wall Thickness

59 Products

Float Valve Bodies for Water

Combine these float valve bodies with floats and rods to create float valves that meet exact specifications. Made of brass, they resist corrosion from water. This makes them ideal for use in cooling towers, high-pressure washers, and processing tanks. However, if exposed to salt or chemicals, they’ll tarnish.

90° Elbow, NPT Male Inlet × NPT Male Outlet


	Smooth Rotating Plunger	Fluted Rotating Plunger

Valve bodies with an NPT outlet thread onto pipe to direct water to a specific location. They’re often used to send water to the bottom of a tank, limiting splashing and disruptions at the surface level.

Viton® Fluoroelastomer Seal—Valve bodies with a Viton® fluoroelastomer seal withstand higher temperatures than those with a Buna-N seal.

Fluted Plunger—Valve bodies with a fluted plunger keep contaminants from getting trapped between the plunger and valve body. This gives your valve stem a seamless path to actuate, extending the life of your valve. They’re ideal for sandy or silty applications, such as in livestock tanks.

Rotating Plunger—Valve bodies with a rotating plunger minimize wear on the internal seal. When the valve opens and closes, the plunger rotates freely. This means the internal seal wears evenly, extending the life of the valve body.

	Float Valve Bodies										Replacement Plungers
	Inlet Pipe Size	Outlet Pipe Size	Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	For Rod Thread Size	Material	Plunger Material		Each		Each
Buna-N Seal







				Smooth Rotating Plunger

				3/8	3/8	9.8 gpm @ 50 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K11	000000	4652K528	000000


				1/2	1/2	15 gpm @ 50 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K12	00000	4652K531	00000
				3/4	3/4	26.3 gpm @ 50 psi	100	35 to 180	1/4"-20	Brass	Brass	4652K13	00000	4652K533	00000
				1	1	49.7 gpm @ 50 psi	100	35 to 180	1/4"-20	Brass	Brass	4652K14	00000	4652K535	00000




						Fluted Rotating Plunger

						3/8	3/8	10.4 gpm @ 55 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K501	00000	4652K529	00000


						1/2	1/2	16 gpm @ 55 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K502	00000	4652K532	00000
						3/4	3/4	28.8 gpm @ 55 psi	100	35 to 180	1/4"-20	Brass	Brass	4652K503	00000	4652K534	00000
						1	1	55 gpm @ 55 psi	100	35 to 180	1/4"-20	Brass	Brass	4652K504	00000	4652K536	00000


						Viton® Fluoroelastomer Seal







										Smooth Rotating Plunger

										3/8	3/8	9.8 gpm @ 50 psi	125	35 to 450	1/4"-20	Brass	Brass	4652K15	00000	———	0


										1/2	1/2	15 gpm @ 50 psi	125	35 to 450	1/4"-20	Brass	Brass	4652K16	00000	———	0
										3/4	3/4	26.3 gpm @ 50 psi	100	35 to 450	1/4"-20	Brass	Brass	4652K17	00000	4652K537	00000
										1	1	49.7 gpm @ 50 psi	100	35 to 450	1/4"-20	Brass	Brass	4652K18	00000	4652K538	00000

90° Elbow, NPT Female Inlet × NPT Female Outlet


Smooth Plunger	Smooth Rotating Plunger

Viton® Fluoroelastomer Seal—Valve bodies with a Viton® fluoroelastomer seal withstand higher temperatures than those with a Buna-N seal.

	Float Valve Bodies										Replacement Plungers
	Inlet Pipe Size	Outlet Pipe Size	Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	For Rod Thread Size	Material	Plunger Material		Each		Each
Buna-N Seal







				Smooth Rotating Plunger

				1 1/4	1 1/4	89 gpm @ 50 psi	125	35 to 180	1/4"-20	Brass	Brass	4664K51	0000000	4652K543	000000


				1 1/2	1 1/2	89 gpm @ 50 psi	125	35 to 180	1/4"-20	Brass	Brass	4664K52	000000	4652K543	00000


				Viton® Fluoroelastomer Seal







								Smooth Rotating Plunger

								1 1/4	1 1/4	89 gpm @ 50 psi	125	35 to 450	1/4"-20	Brass	Brass	4664K53	000000	———	0


								1 1/2	1 1/2	89 gpm @ 50 psi	125	35 to 450	1/4"-20	Brass	Brass	4664K54	000000	———	0

90° Elbow, NPT Male Inlet × Discharge Outlet


Fluted Plunger	Fluted Nonrotating Plunger

Valve bodies with a discharge outlet release contents into your tank. The outlet is unthreaded.

Nonrotating Plunger—Valve bodies with a nonrotating plunger maintain a tight seal in turbulent water, such as in mixing tanks and tanks with boiling water. However, the seal wears faster than in valve bodies with a rotating plunger.

	Float Valve Bodies											Replacement Plungers
		Discharge Slot
	Inlet Pipe Size	Wd.	Lg.	Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	For Rod Thread Size	Material	Plunger Material		Each		Each
Buna-N Seal







				Fluted Nonrotating Plunger

				3/8	13/32"	23/32"	10.4 gpm @ 55 psi	120	35 to 180	1/4"-20	Brass	Celcon Acetal	4652K512	000000	4652K539	000000


				1/2	13/32"	23/32"	18 gpm @ 55 psi	120	35 to 180	1/4"-20	Brass	Celcon Acetal	4652K513	00000	4652K539	00000
				3/4	27/64"	1"	30 gpm @ 55 psi	100	35 to 180	1/4"-20	Brass	Celcon Acetal	4652K514	00000	4652K541	00000

90° Elbow, NPT Female Inlet × Discharge Outlet


Smooth Plunger	Smooth Rotating Plunger	Smooth Nonrotating Plunger

Valve bodies with a discharge outlet release contents into your tank. The outlet is unthreaded.

Viton® Fluoroelastomer Seal—Valve bodies with a Viton® fluoroelastomer seal withstand higher temperatures than those with a Buna-N seal.

	Float Valve Bodies													Replacement Plungers
		Discharge Slot					For Rod
	Inlet Pipe Size	Wd.	Lg.	Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	Thread Size	Pipe Size	Thread Type	Material	Plunger Material		Each		Each
Buna-N Seal







				Smooth Rotating Plunger

				1 1/4	3/4"	2"	140 gpm @ 50 psi	115	35 to 180	—	1/8	NPT	Brass	Brass	4664K63	0000000	———	0


				1 1/2	3/4"	2"	140 gpm @ 50 psi	115	35 to 180	—	1/8	NPT	Brass	Brass	4664K64	000000	———	0
				2	3/4"	2"	125 gpm @ 50 psi	115	35 to 180	—	1/8	NPT	Brass	Brass	4664K65	000000	———	0




						Smooth Nonrotating Plunger

						1/2	1/2"	51/64"	20.5 gpm @ 55 psi	115	35 to 180	1/4"-20	—	—	Brass	Brass	4652K515	00000	4652K544	000000


						3/4	1/2"	25/32"	20.5 gpm @ 55 psi	115	35 to 180	1/4"-20	—	—	Brass	Brass	4652K516	000000	4652K544	00000
						1	3/4"	1 7/32"	80 gpm @ 55 psi	115	35 to 180	3/8"-16	—	—	Brass	Brass	4652K517	000000	4652K545	00000
						1 1/4	3/4"	2"	140 gpm @ 55 psi	115	35 to 180	3/8"-16	—	—	Brass	Brass	4652K518	000000	4652K546	00000
						1 1/2	3/4"	2"	140 gpm @ 55 psi	115	35 to 180	3/8"-16	—	—	Brass	Brass	4652K519	000000	4652K546	00000
						2	3/4"	2"	140 gpm @ 55 psi	115	35 to 180	3/8"-16	—	—	Brass	Brass	4652K521	000000	4652K546	00000


						Viton® Fluoroelastomer Seal







										Smooth Rotating Plunger

										1 1/4	3/4"	2"	140 gpm @ 50 psi	115	35 to 450	—	1/8	NPT	Brass	Brass	4664K66	000000	———	0


										1 1/2	3/4"	2"	140 gpm @ 50 psi	115	35 to 450	—	1/8	NPT	Brass	Brass	4664K67	000000	———	0
										2	3/4"	2"	125 gpm @ 50 psi	115	35 to 450	—	1/8	NPT	Brass	Brass	4664K68	000000	———	0




												Smooth Nonrotating Plunger

												1/2	1/2"	51/64"	20.5 gpm @ 55 psi	115	35 to 450	1/4"-20	—	—	Brass	Brass	4652K522	00000	———	0


												3/4	1/2"	25/32"	20.5 gpm @ 55 psi	115	35 to 450	1/4"-20	—	—	Brass	Brass	4652K523	000000	———	0
												1	3/4"	1 7/32"	80 gpm @ 55 psi	115	35 to 450	3/8"-16	—	—	Brass	Brass	4652K524	000000	———	0
												1 1/4	3/4"	2"	140 gpm @ 55 psi	115	35 to 450	3/8"-16	—	—	Brass	Brass	4652K525	000000	———	0
												1 1/2	3/4"	2"	140 gpm @ 55 psi	115	35 to 450	3/8"-16	—	—	Brass	Brass	4652K526	000000	———	0
												2	3/4"	2"	140 gpm @ 55 psi	115	35 to 450	3/8"-16	—	—	Brass	Brass	4652K527	000000	———	0

Through-Wall 90° Elbow, NPT Male Inlet × NPT Male Outlet


Smooth Plunger	Smooth Rotating Plunger

Through-wall valve bodies install through your tank wall. They’re good for tanks where there isn’t enough space overhead to route pipe.

Viton® Fluoroelastomer Seal—Valve bodies with a Viton® fluoroelastomer seal withstand higher temperatures than those with a Buna-N seal.

	Float Valve Bodies										Replacement Plungers
	Inlet Pipe Size	Outlet Pipe Size	Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	For Rod Thread Size	Material	Plunger Material		Each		Each
Buna-N Seal







				Smooth Rotating Plunger

				3/8	3/8	10.4 gpm @ 55 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K505	000000	4652K528	000000


				1/2	1/2	16 gpm @ 55 psi	125	35 to 180	1/4"-20	Brass	Brass	4652K506	00000	4652K531	00000
				3/4	3/4	28.8 gpm @ 55 psi	100	35 to 180	1/4"-20	Brass	Brass	4652K507	00000	4652K533	00000


				Viton® Fluoroelastomer Seal







								Smooth Rotating Plunger

								3/8	3/8	10.4 gpm @ 55 psi	125	35 to 450	1/4"-20	Brass	Brass	4652K508	00000	———	0


								1/2	1/2	16 gpm @ 55 psi	125	35 to 450	1/4"-20	Brass	Brass	4652K509	00000	———	0
								3/4	3/4	28.8 gpm @ 55 psi	100	35 to 450	1/4"-20	Brass	Brass	4652K511	00000	4652K537	00000