McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Drain Cleanout Hole Covers

    Allow easy access to cleanout plugs hidden behind walls and floors. Covers come with the bolts you need to hold them in place.
    Covers for Floor Cleanouts
    Image of Product. Front orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 1 Hole.
    Image of Product. Bottom orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 2 Holes.
    Image of Product. Bottom orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 3 Holes.

    1 Hole

    2 Holes

    3 Holes

    No. of
    Holes
    Dia.
    Thk.
    Material
    Wt. Cap.,
    lb.
    Mounting Fasteners
    Included
    Bolt
    Lg.
    Each
    15 1/8"3/16"Nickel2,400Yes1 1/2"2043K420000000
    15 1/8"5/8"Cast Iron7,500Yes2 1/2"2043K5700000
    16 1/8"1/4"Nickel2,400Yes1 1/2"2043K45000000
    16 1/8"5/8"Cast Iron7,500Yes2 1/2"2043K5800000
    17 3/4"1/4"Nickel1,000Yes1 1/2"2043K53000000
    17 3/4"5/8"Cast Iron7,500Yes2 1/2"2043K5900000
    18 3/8"1/4"Nickel2,400Yes1 1/2"2043K46000000
    25 1/8"5/8"Cast Iron7,500Yes1 1/2"2043K6100000
    26 1/8"5/8"Cast Iron7,500Yes1 1/2"2043K6200000
    27 3/4"5/8"Cast Iron7,500Yes1 1/2"2043K6300000
    34"3/16"Nickel4,000Yes5/8"2043K5400000
    35 1/8"3/16"304 Stainless Steel
    		4,000Yes5/8"2043K6400000
    35 1/8"3/16"Nickel4,000Yes5/8"2043K5500000
    36 1/8"3/16"304 Stainless Steel
    		4,000Yes5/8"2043K6500000
    36 1/8"3/16"Nickel4,000Yes5/8"2043K5600000

    Floor Drain Cleanouts

    Image of Product. Bottom orientation. Drain Cleanouts. Floor Drain Cleanouts.
    Create an access point to inspect and clean a floor drain pipeline. The cover on these cleanouts can be adjusted up or down to sit flush with the finished floor. An ABS cleanout plug underneath the cover prevents debris from entering and sewer gases from exiting the system. These cleanouts are compatible with Schedule 40 PVC pipe for gravity-flow drain, waste, and vent applications. Attach to your unthreaded drain pipe with a PVC primer and cement (also known as solvent weld).
    Material
    Pipe
    Size
    Dia.
    Ht.
    Wt. Cap.,
    lb.
    Cover
    Body
    Plug
    Each
    Female Cement Socket
    2
    		5 3/16"2 5/8" to 3 1/2"2,000Textured NickelPVC
    		ABS
    		6139N11000000
    3
    		5 3/16"3 7/8" to 4 3/4"2,000Textured NickelPVC
    		ABS
    		6139N1200000
    4
    		5 3/16"4 5/16" to 5 3/16"2,000Textured NickelPVC
    		ABS
    		6139N1300000
     

    Brass and Bronze Threaded Cleanout Plugs

    Image of Product. Raised. Front orientation. Pipe and Fittings. Brass and Bronze Threaded Cleanout Plugs.

    Raised

    Image of Product. Recessed. Front orientation. Pipe and Fittings. Brass and Bronze Threaded Cleanout Plugs.

    Recessed

    Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Recessed
    Raised
    Cleanout Plug
    OD/Fitting ID
    For Pipe
    Size
    Thread
    Type
    Material
    Each
    Each
    1 7/8"1 1/2
    		NPT
    		Brass2400K52000002400K7200000
    2 3/8"2
    		NPT
    		Brass2400K5300002400K730000
    2 27/32"2 1/2
    		NPT
    		Brass———02400K740000
    3 15/32"3
    		NPT
    		Brass2400K5500002400K750000
    3 31/32"3 1/2
    		NPT
    		Brass2400K56000002400K760000
    4 15/32"4
    		NPT
    		Brass2400K57000002400K7700000
    5 17/32"5
    		NPT
    		Brass2400K59000002400K7900000
    6"—NPT
    		Brass2400K6100000———0
    6 19/32"6
    		NPT
    		Brass2400K62000002400K8200000
    Plug Wrenches
    Each
    Plug Wrench for Recessed Plugs2400K1000000

    ABS Threaded Cleanout Plugs

    Image of Product. Recessed. Front orientation. Pipe and Fittings. ABS Threaded Cleanout Plugs.

    Recessed

    Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Recessed
    Cleanout Plug
    OD/Fitting ID
    For Pipe
    Size
    Thread
    Type
    Material
    Each
    1 7/8"1 1/2
    		NPT
    		ABS9359T2100000
    2 3/8"2
    		NPT
    		ABS9359T220000
    2 27/32"2 1/2
    		NPT
    		ABS9359T230000
    3 15/32"3
    		NPT
    		ABS9359T240000
    3 31/32"3 1/2
    		NPT
    		ABS9359T250000
    4 15/32"4
    		NPT
    		ABS9359T260000
    6 19/32"6
    		UNC
    		ABS9359T2900000
    Plug Wrenches
    Each
    Plug Wrench for Recessed Plugs2400K1000000

    Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals

    Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies. All meet UL and ASTM standards for flame retardance and self-extinguishment in the case of fire. They also meet strict ASTM specifications and testing requirements for material quality and product dimensions. They’re compatible with Orion Blueline No-Hub and Orion Rionfuse chemical waste pipe and pipe fittings.
    Either a clamp connector or electrofusion connector is required to connect grooved ends on adapters to pipe or to another fitting with a grooved end. Clamp connectors can be easily taken apart as needed for maintenance. Grooving tools (sold separately) prepare ungrooved ends for clamping. Electrofusion connectors create a stronger, more permanent connection than clamp connectors. Use electrofusion tools (sold separately) to weld these fittings in place.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    External-Square-Drive Plugs/Straight Adapters
    Image of Product. Electrofusion Socket/Grooved-End Clamp-On Male. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, External-Square-Drive Plugs/Straight Adapters, Electrofusion Socket/Grooved-End Clamp-On Male, Hex Body.

    Electrofusion

    Socket/Grooved-End

    Clamp-On Male

    Adapters with a threaded pipe end connect and disconnect easily on that side, no clamp or welding required. Thread sealant tape (sold separately) prevents leaks in threaded connections. To prevent overtightening that could cause cracks and leaks, first finger-tighten fittings, then turn once or twice with a wrench.
    Pipe
    Size
    Body
    Shape
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Each
    Electrofusion Socket/Grooved-End Clamp-On Male
    1 1/2
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N202000000
    2
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N20300000
    3
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N205000000
    4
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N206000000
     
    270° Bend Connectors
    Image of Product. Bottom orientation. Pipe Traps. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, 270° Bend.

    270° Bend

    270° Bend Connectors—270° bend fittings are also known as P-traps.
    Pipe
    Size
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Fitting
    Type
    Each
    Electrofusion Socket/Grooved-End Clamp-On Male
    1 1/2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2270° Bend5389N1020000000
    2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2270° Bend5389N103000000
     
    Union 270° Bend Connectors
    Image of Product. Bottom orientation. Pipe Traps. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, Union 270° Bend.

    Union 270° Bend

    Union 270° Bend Connectors—270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
    Pipe
    Size
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Fitting Type
    Each
    Electrofusion Socket/Grooved-End Clamp On Male
    1 1/2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2Union 270° Bend5389N3020000000
    2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2Union 270° Bend5389N303000000
     
    back to top