Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). You can also power them with an extension cord (not included). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it. When you're done using them, fold them up. They have a handle for easy transport.

Built to handle tough jobsites, their legs and plastic lens resist impact. And they’ll work outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. Plus, they’re protected against dirty, dusty conditions.

Style B have three light heads for more than double the brightness of Style A. Each one pivots for multidirectional lighting. With a built-in M18 charger, you can charge the battery if you plug in an extension cord. They also have a USB port for charging phones and other devices.

Note: Battery life depends on the size of your battery.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed. When you're done using them, fold them up. They have a handle for easy transport.

Built for tough jobsites, these floodlights have an impact-resistant plastic lens. And rated IP55, they’re sealed against humidity and low-pressure washdowns, so they’re good to use outside and in other damp areas. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice. To choose your perfect light position, raise the mast up and down, then rotate and tilt the head. Ideal for tough jobsites, their polycarbonate lens resists impact. A battery life indicator lets you know when to recharge. You can still use them when they’re charging. They also have a 12V socket, also known as a vehicle outlet, to plug devices in and charge them. Adjust the light output using the keypad.

Style A have a handle and shoulder strap for easy transport.

Style B have two heads for double the brightness of Style A. These floodlights come with a USB adapter to charge up to two phones. With wheels and a retractable handle, you can move these floodlights around like a suitcase.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style A can be hung or propped up like a picture frame with their handle. Adjust from a focused spot beam to a wide flood beam by twisting the light head. Rated IP54, these floodlights also seal out dusty conditions. Their high-capacity battery lets you plug your phone or other device in to charge while you’re working. And when you plug these lights in to charge, they’ll still produce light. The battery life indicator will let you know when to recharge.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Style C are the best at showing slight color differences. Originally used by evidence technicians, they’re great for inspecting paint or similarly colored wires. Light up something nearby or far away by adjusting the diffuser lens from a flood beam to a spot beam. Rated IP07, these floodlights will still work even if they’re temporarily submerged. They also have the best battery life, offering up to a full day of lighting. For unlimited operation, use the included adapters to plug them into a standard outlet or a 12V power source, such as a truck. They also come with a remote that lets you control them from up to 20 feet away. To mount, hang them like a lantern with the loop on top or stick them to a metal surface with the magnetic base. If you don’t have a surface to work with, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.

Style A have a handle that props them up. It fully rotates so you can aim the light beam where it’s needed.

Style B have a domed, lantern-style top that diffuses light for 360° illumination. Place them next to your work or hang them up from their built-in hook. To protect against drops, they have four carrying handles that stick out to absorb impact. Control these floodlights with your device via Bluetooth by downloading the free app.

Style C double as a toolbox—the lights are built into the lid. It has two light heads that pivot to aim light where you need it. You can detach the lid and hang it up with the built-in hook. To conserve battery, these floodlights have seven brightness levels to choose from. They’ll also run on AC power with an extension cord (not included).

IP54-rated floodlights are sealed against humidity and splashing and falling liquids, so they’re good for the outdoors and other damp spaces. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Brighten remote areas using the same battery as your other cordless Milwaukee tools. Since these lights run on a Milwaukee M18 battery (sold separately), you don’t need to have an outlet nearby. Their LEDs are protected by an impact-resistant polycarbonate lens.

Style A have an octagonal shape, so they won’t roll away when you place them on their side. They’re tough enough to withstand a drop from 12 ft.

Styles B and C cast diffused light in all directions and can switch to 90° of targeted illumination. They’ll also run on AC power with an extension cord (not included). Style B have a hook in the base to hang them. Style C have an extra battery slot for a second battery to extend the run time. Each has a built-in outlet, so you can daisy chain several of them with an extension cord to illuminate a larger space. They’re also stackable.

Styles D and E have heads that tilt to direct light where you need it. You can mount them to the ceiling or a wall thanks to fastener mounts on the bottom. They’ll also run on AC power with an extension cord (not included). Style E send light in all directions when you pivot the panels all the way back. You can also mount them using the built-in hook or magnetic base.

All lights are protected from dirty, dusty conditions. IP54-rated lights are sealed against splashing liquid and humidity. IP65-rated lights are sealed against sprays, such as those from a garden hose.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed. Their LEDs cast a cool light that highlights white and blue tones, which is good for inspecting.

Style A have a durable tempered-glass lens to protect the LEDs. For easy carrying, you can fold the frame flat.

Style B still work if you accidentally drop them in water—they’re IP67 rated. A USB-A power outlet on the back lets you charge your phone or other device.

Style C aim light in three directions. A light panel on each side pivots independently from the central panel.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped. They're often used on high-traffic job sites. They shine light 360°.

Floodlights with a steel guard offer added protection.

Floodlights with an outlet let you connect multiple lights to one circuit—plug them into each other just like string lights.

IP54- and IP55-rated lights can work outdoors and in other damp environments—they seal out humidity and dripping, splashing, and falling liquids. They also stay protected in dusty conditions. IP55-rated lights are sealed against low-pressure washdowns.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink. Rated IP68, they’re dust- and watertight enough to handle being temporarily submerged in water, so torrential downpours and snowstorms won’t be a problem. Tilt the heads and adjust the height of the stand to direct light where you need it.

Style A lights are also known as balloon lights—they cast light in all directions through a fabric diffuser to reach a diameter of 200 ft. For focused light, remove the diffuser. They’re lightweight, weighing just 45 lbs., so you can move them around your site. Yet they’re sturdy enough to withstand winds of 30 mph with the diffuser on and 60 mph with the diffuser off.

Style B lights have four heads that rotate and pivot individually, so you can aim the light up to 160 ft. in whatever direction you choose. Once you raise the lights, you can rotate the mast to direct light. They’re stable enough to stand firm in 45 mph winds thanks to their sturdy steel frame. A single person can maneuver them, even through doorways. You cannot tow these lights. They have a power outlet at the base to plug in a tool or link up a second light.

An extension cord (sold separately) is required to power Style B lights. If you’re powering only one, use a cord with a NEMA 5-15 plug. If you’re powering two of these lights on one circuit or plan to plug in a power tool, use a cord with a NEMA L5-20 plug to power the first light. The light has inlets for both plug types.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field. Also known as light towers, they rise up to 23 ft. To direct light where you want it, pivot any of the four heads. You can also rotate the mast, even if it’s already raised.

Rated IP65, these floodlights are protected against dust and low-pressure washdowns. That means rain won’t be a problem. They’ll also handle winds up to 65 mph. Just secure the hitch and two side supports to the ground with the attached leveling jacks. These floodlights will work in the cold, but not in subzero temperatures.

For towing from jobsite to jobsite, these floodlights have a trailer with a ball hitch and tongue. They also come with safety chains, which have a 7,800-lb. load capacity. The trailer’s lights are D.O.T. approved for road use.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.

Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.

Style A can withstand extreme weather and washdowns. Rated NEMA 6P, you can plunge them 6 ft. underwater for 24 hrs. and they’ll still work. They’re easy to move around since they weigh just 10 lbs. Rubber bumpers prevent damage if they’re bumped or dropped. Those with an explosion-proof power supply have a sealed enclosure, so you can make safe electrical connections within the hazardous environment. Their power supply and plug are explosion-proof rated.

Style B are rated NEC Class III for use in areas with ignitable concentration of combustible fibers and other particles. Rated IP67, they’re dust tight and you can plunge them in 3 ft. of water for 30 mins. and they’ll still work. They won’t spark if dropped and they resist corrosion from salt water and damp conditions.

Add light to your work area without sacrificing desk space. These floor lamps have a long lens and an any-which-way arm for even, adjustable lighting across an entire work surface. While flexible, the arm holds its shape once you set it. The glare-free LEDs shine at a daylight temperature that’s ideal for inspecting small parts and other detailed work. With a color rendering index (CRI) of 95, these lights make colors look natural and vibrant. This is ideal in offices for visual comfort or workspaces where color accuracy is important. Toggle between four levels of brightness as needed. The head rotates, so you can direct light where you need it. A built-in USB-C port lets you charge your phone and other accessories.

This light is sealed to withstand shallow water, such as ponds and fountains. It has a durable tempered-glass lens to protect the bulb. It's furnished with a halogen bulb that casts a warm, yellow-toned light that's similar in apprearance to incandescent lights.