Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Improve the strength of your concrete mix by eliminating trapped air.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Make removing form-board stakes easier.

Fix damaged wood or build up and replace missing wood.

These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2” wide.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.