Acetylene Flow Controls | McMaster-Carr

Filter by

For Use With

Thread Type

System of Measurement

Maximum Inlet Pressure

Connects To

Thread Direction

Fitting Connection

Pipe Size

Quick-Disconnect Component

Thread Size

DFARS Compliance

Shape

Stage

Valve Function

Inlet CGA Number

Maximum Outlet Pressure Gauge Measurement

Outlet Pressure

Inlet Thread Type

Gender

Inlet Connection Port

Minimum Temperature

Valve Type

Maximum Temperature

Forward

How can we improve?

16 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

About Gas Regulators

With Knob

For Use With: See Table
Temperature Range: See Table

Install these valves directly in gas distribution pipelines for acetylene, hydrogen, or propane. They automatically reduce a high inlet pressure to a lower, stable outlet pressure. Valves have two outlets to fit various pipe configurations and come with a plug to close the unused outlet. The gauge monitors outlet pressure. All valves are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate.

Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.

	Inlet			Outlet
For Use With	Pipe Size	Location	Max. Pressure, psi	Pipe Size	Location	Pressure Gauge Range, psi	Temperature Range, ° F	End-to-End Lg.	Port-to-Port Lg.		Each
NPT Female
Brass Body—Neoprene/Nylon Diaphragm and Neoprene Seal
Acetylene	1/4	Side	350	1/4	Bottom, Side	0 to 30	-20° to 120°	2.60"	1.32"	0000000	0000000

Tank-Mount Pressure-Regulating Valves for Fuel Gases

For Use With: See Table
Temperature Range: -20° to 120° F

Attach these valves to acetylene, hydrogen, methane, propane, or propylene tanks to reduce a high inlet pressure to a lower, stable outlet pressure. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.

Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.

Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.

Valves with a brass body have a longer service life than valves with a brass and steel body.

Valves with a stainless steel diaphragm can withstand harsh environments.

Single-Stage Valves

Male Outlet × Female Inlet Single-Stage Valve With Knob

Male Outlet × Female Inlet Single-Stage Valve With T-Handle

Male Outlet × Male Inlet Single-Stage Valve With Knob

Male Outlet × Male Inlet Single-Stage Valve With T-Handle

Inlet				Outlet					Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Acetylene
UNF Male Outlet × NGO Female Inlet
CGA 300	Side	Right Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	Knob	Brass/Steel	PTFE	Rubber	0000000	0000000
CGA 300	Side	Right Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass	PTFE	Rubber	000000	000000
UNF Male Outlet × NGO Male Inlet
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	Knob	Brass/Steel	PTFE	Rubber	0000000	000000
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass	PTFE	Rubber	000000	000000
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass	PTFE	Stainless Steel	0000000	000000

Two-Stage Valves

Male Outlet × Female Inlet Two-Stage Valve With T-Handle

Male Outlet × Male Inlet Two-Stage Valve With T-Handle

Inlet				Outlet					Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Acetylene
UNF Male Outlet × NGO Female Inlet
CGA 300	Side	Right Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass	PTFE	Stainless Steel	0000000	0000000
CGA 300	Side	Right Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass/Steel	PTFE	Rubber	000000	000000
UNF Male Outlet × NGO Male Inlet
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass	PTFE	Stainless Steel	0000000	000000
CGA 510	Side	Left Hand	0 to 400	9/16"-18	Side	Left Hand	0 to 15	T-Handle	Brass/Steel	PTFE	Rubber	0000000	000000

Quick-Disconnect Hose Couplings for Compressed Gas

Use these couplings to quickly link and unlink welding hoses, torches, and pressure regulators. They consist of a plug and socket that are sold together as a set of two—you’ll get one right-hand connection for oxygen and one left-hand connection for fuel gas. The connections are noninterchangeable and color coded so you can’t mix lines. The male threaded ends attach to threaded welding hose, and the female threaded ends attach to a torch or pressure regulator. To connect couplings, push the plug into the socket; the sleeve on the socket has a spring-loaded lock for gas-tight connections. To disconnect, pull back on the socket sleeve and twist to release the plug. The sockets have a shut-off valve that stops the flow when the coupling is separated so gas won’t leak from the line. The sockets also have a built-in check valve to prevent gas backflow. Couplings are also known as CGA (Compressed Gas Association) couplings. They are brass for good corrosion resistance.

Couplings with left-hand threads are identified with a notch in the nut.

Note: Couplings have a CGA number that corresponds to a specific type of gas. Make sure the CGA number of the coupling matches the CGA number of your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Brass Plug and Socket Sets, Male Hose × Female Torch

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F
Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed

Includes	Gas Fitting Size	Thread Size	Thread Type	Thread Direction	For Use With		Each
One CGA 022 Coupling Adapter (Male Hose Plug × Female Torch Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Torch Socket)	B	9/16"-18	UN/UNF (CGA)	Right Hand (CGA 022), Left Hand (CGA 023)	Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane	000000	000000

Brass Plug and Socket Sets, Male Hose × Female Regulator

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F
Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed

Includes	Gas Fitting Size	Thread Size	Thread Type	Thread Direction	For Use With		Each
One CGA 022 Coupling Adapter (Male Hose Plug × Female Regulator Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Regulator Socket)	B	9/16"-18	UN/UNF (CGA)	Right Hand (CGA 022), Left Hand (CGA 023)	Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane	000000	0000000

Brass Plug and Socket Sets, Male Hose × Male Hose

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F
Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed

Includes	Gas Fitting Size	Thread Size	Thread Type	Thread Direction	For Use With		Each
One CGA 022 Coupling Adapter (Male Hose Plug × Male Hose Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Male Hose Socket)	B	9/16"-18	UN/UNF (CGA)	Right Hand (CGA 022), Left Hand (CGA 023)	Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane	000000	0000000

Welding Gas Check Valves for Regulators

Stop the reverse flow of gas in your regulator. Check valves do not stop flashbacks.

Max. Pressure, psi			Male Hose Connection			Male Pipe Connection
Acetylene	Hydrogen	Propane	Thread Direction	Thread Size	Thread Type	Thread Direction	Pipe Size	Thread Type	Material		Each
50	50	50	Right Hand	9/16"-18	UNF	Left Hand	1/4	NPT	Brass	000000	000000

Welding Gas Check Valves for Torches

Stop the reverse flow of gas in your torch. Check valves do not stop flashbacks.

Max. Pressure, psi			Male Hose Connection			Female Hose Connection
Acetylene	Hydrogen	Propane	Thread Direction	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Material		Each
50	50	50	Left Hand	3/8"-24	UNF	Left Hand	3/8"-24	UNF	Brass	000000	000000
50	50	50	Left Hand	9/16"-18	UNF	Left Hand	9/16"-18	UNF	Brass	000000	00000