About On/Off Valves
More
Compact Threaded On/Off Valves for Chemicals
For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.
Polypropylene valves are the most chemical resistant. They handle a wide range of acids, solvents, and other harsh substances.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Ammonia, Carbon Dioxide, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Liquid Carbon Dioxide, Phosphoric Acid, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
NPT Female × NPT Female | |||||||
|---|---|---|---|---|---|---|---|
| 3/8 | 7.7 | Full | 150 psi @ 70° F | 30° to 120° | 2 3/4" | 00000000 | 000000 |
| 1/2 | 14 | Full | 150 psi @ 70° F | 30° to 120° | 3 1/8" | 00000000 | 00000 |
| 3/4 | 29 | Full | 150 psi @ 70° F | 30° to 120° | 3 3/4" | 000000000 | 00000 |
| 1 | 47 | Full | 150 psi @ 70° F | 30° to 120° | 4 1/2" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With: See table
- Seal Material: See table
| Pipe Size | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | Seal Material | End-to-End Lg. | For Use With | Each | |
NPT Female × NPT Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8 | 3.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 000000 |
| 1/4 | 2.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 7 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 9.1 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 1/2 | 8.1 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | Not Rated | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Female × NPT Male | |||||||||
| 1/8 | Not Rated | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.6 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 3/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 3/4 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Male × NPT Female | |||||||||
| 1/4 | 1.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 6.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 0000000 | 0000 |
| 1/2 | 6.9 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 7/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 9.5 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 5/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 | 1.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.3 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
Threaded Isolation On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol, Neon, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PEEK Plastic
- Specifications Met: ASME B16.34
Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. Also known as block and bleed valves, turn the handles to block both upstream and downstream flow, drain the liquid trapped in the valve through the bleed port, and then remove your instrument from the gauge port. Often used in chemical-processing lines, these valves have a PTFE seal and a corrosion-resistant 316 stainless steel body. All are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Gauge Port | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Each | |
316 Stainless Steel Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 1/4 | Female | NPT | 6.4 | 10000 psi @ 170° F | -65° to 450° | 0000000 | 0000000 |
Easy-to-Install Threaded On/Off Valves for Chemicals
For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces. All have a plastic body that can stand up to aggressive and corrosive solutions in chemical-processing applications.
Flow-indicating T-handles show the percentage the valve is open.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: See table
- Ball Material: PVC Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
| Pipe Size | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | For Use With | Each | |
Threaded Union × Threaded Union with Flow-Indicating T-Handle | |||||||
|---|---|---|---|---|---|---|---|
| 1/2 | 150 psi @ 65° F | 35° to 140° | Standard | 4 1/8" | Ammonia, Butane, Citric Acid, Hydrochloric Acid, Methanol, Nitric Acid, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water | 000000 | 0000000 |
Easy-Clean Threaded On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
There’s no need to unbolt these valves for cleaning—remove the valve handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body to withstand aggressive and corrosive solutions in chemical-processing applications. All are full port, so they do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/4 | 1.7 | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 00000000 | 000000 |
| 3/8 | 4.2 | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 1/2 | 5.7 | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 3/4 | 8.2 | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 00000000 | 00000 |
On/Off Valves with Barbed Fittings for Chemicals
Barbs grip onto tubing, providing a secure hold. To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a chemical-resistant seal.
PVC valves are standard for most chemical processing applications.
Lever handles show the valve’s position.Valves with tapered barbs can be used with multiple tube sizes.
Standard port valves slightly restrict flow.Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With: Ammonia, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide
- Ball Material: PVC Plastic
- Seal Material: EPDM Rubber
- Seat Material: EPDM Rubber
| For Tube ID | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | Each | |
Tapered Barbed × Tapered Barbed | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/8", 1/2", 5/8" | __ | 1.6 | 150 psi @ 70° F | 35° to 120° | 29.9 | Standard | 4 3/8" | 00000000 | 000000 |
Tapered Barbed × NPT Female | |||||||||
| 3/8", 1/2", 5/8" | 1/4 | 1.6 | 150 psi @ 70° F | 35° to 120° | 29.9 | Standard | 3 9/16" | 00000000 | 00000 |
Tapered Barbed × NPT Male | |||||||||
| 3/8", 1/2", 5/8" | 1/4 | 1.6 | 150 psi @ 70° F | 35° to 120° | 29.9 | Standard | 3 1/2" | 00000000 | 00000 |
On/Off Valves with Yor-Lok Fittings for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Carbon Dioxide, Diesel Fuel, Gasoline, Kerosene
- Ball Material: Monel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Specifications Met: ASME B16.34, ASME B31.3
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves have a PTFE seal and a corrosion-resistant Monel ball and body that can stand up to aggressive and corrosive chemicals such as acetone. All are standard port, so they slightly restrict flow. A red handle makes them easy to identify.
For technical drawings and 3-D models, click on a part number.
Easy-to-Install Plastic Threaded Flow-Adjustment Valves
- Valve Type: Ball
- For Use With: Ammonia, Butane, Citric Acid, Hydrochloric Acid, Methanol, Nitric Acid, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water
- Seal Material: EPDM Rubber
A threaded union on these valves makes them easy to install and remove without disrupting your line. They’re a good choice for lines that require frequent maintenance or cleaning. They thread together or apart with only a turn to the union fitting, unlike other threaded flow-adjustment valves that require repositioning your pipe or valve. The union fitting slides over your pipe, and the threaded fitting sits inside. Ideal for metering, sampling, and other applications, these valves gradually open and close to adjust flow as you turn the handle. A dial displays the percentage you’ve opened them. With a standard port, they’ll slightly restrict flow even when fully open. These valves come with socket-connect fittings for making threaded-to-threaded connections or adapting threaded to socket connections.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Includes | Each | |
Dark Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
| 1/2 | 1.4 | 150 psi @ 65° F | 35° to 140° | Standard | 4 1/8" | Socket-Connect Connectors | 000000 | 0000000 |
Easy-Clean Threaded Diverting Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
There’s no need to unbolt these valves for cleaning—remove the handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body for diverting flow in chemical-processing applications. All are full port, so they do not restrict flow.
Valves with a side-port inlet direct flow from the right port to the center or left port. They cannot shut off flow.
Valves with any port inlet can use any port as an inlet or outlet. Turn the handle to direct flow from the inlet port to one outlet port at full capacity, direct flow to both outlet ports simultaneously at reduced capacity, or shut off flow completely.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Pattern | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||
| 1/4 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 000000000 | 000000 |
| 3/8 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 000000000 | 00000 |
| 1/2 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 000000000 | 00000 |
| 3/4 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 000000000 | 00000 |
| Pipe Size | Flow Pattern | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||
| 1/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 00000000 | 000000 |
| 3/8 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 1/2 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 3/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 00000000 | 00000 |
On/Off Valve Bodies
Automatically or manually start and stop flow in your line with these valve bodies, which attach to your actuator. They have a full port, so they don’t restrict flow. All meet standard ISO 5211 mounting dimensions. Use valve stem adapters to mount to valve actuators with a larger stem opening.
316 stainless steel valve bodies have excellent corrosion resistance.
Three-piece valve bodies are easy to maintain because you can take them apart without removing them from your line.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max Steam Pressure | Pressure Drop | Temp Range, °F | Actuator Mounting Pattern | Stem Size, mm | Lg. | Wd. | Ht. | Port Type | Max. Torque, in.-lbs. | For Valve Manufacturer Model Number | Each | |
316 Stainless Steel Body—Three Piece Construction | |||||||||||||||
NPT Female | |||||||||||||||
| 1/2 | 15 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F03, F04 | 9 | 2 5/8" | 1 13/16" | 1 15/16" | Full | 50 | AS7002MC, AS7012MC | 00000000 | 000000 |
| 3/4 | 35 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F03, F04 | 9 | 3" | 1" | 2 3/16" | Full | 70 | AS7003MC, AS7013MC | 000000 | 00000 |
| 1 | 60 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F04, F05 | 11 | 3 3/8" | 2 3/16" | 2 11/16" | Full | 100 | AS7004MC, AS7014MC | 000000 | 000000 |
| 1 1/2 | 138 | 1250 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F05, F07 | 14 | 4 11/16" | 3 3/32" | 3 7/8" | Full | 390 | AS7006MC, AS7016MC | 000000 | 000000 |
| 2 | 270 | 1000 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F05, F07 | 14 | 5 1/8" | 3 3/4" | 4 1/8" | Full | 480 | AS7007MC, AS7017MC | 000000 | 000000 |