Extend your reach in hard-to-access areas—turn these valves on and off using a square ratchet to grasp the hole at the end of the handle. Use with water, oil, air, and inert gas.

Attach a gauge to the side port on these valves to monitor pressure, temperature, and other measurements in your line. Use with water and air.

A built-in strainer traps debris and allows you to replace the screen without disconnecting your pipeline.

Monitor and maintain flow quality from a single valve—these valves have a gauge port, strainer, and drain built in.

Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components. Use with water, oil, air, inert gas, and steam.

These valves are rated for at least three times the pressure of standard threaded valves. Use with water, oil, air, inert gas, and steam.

For fast installation and removal from pipelines, these valves have a union fitting that disassembles into multiple pieces. They’re for use with water, oil, air, inert gas, and steam.

Control flow through any garden hose—the threads on these valves are universally compatible with garden hose connections. Made of PVC, they’re a lightweight and corrosion resistant alternative to metal valves.

Fit these short and slim valves in control boxes, panels, and other tight spots. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.

Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. Use with water, oil, air, steam and inert gas such as helium.

Made of plastic, these valves are a lightweight alternative to metal valves. Union fittings connect the flanges to the valve—with a quick turn, you can install and remove the valve without having to bolt and unbolt the flange each time.

Barbs grip onto tubing, giving these valves a secure hold. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.

Often used for oxygen service and other high-purity applications, these valves come cleaned and bagged. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection. For easy maintenance, they have a three-piece bolted body that disassembles inline so you can access internal components without removing welded connections.

Solder these valves to metal tubing for a permanent, leak-tight connection.

The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene.

Control the flow of chemical solutions from any garden hose. With a fluoroelastomer seal and polypropylene body, these valves withstand strong chemicals, such as chlorinated water and phosphoric acid.

No need to remove these valves from your line to access their internal components—the three-piece bolted body comes apart. Ideal in chemical-processing applications, the seal and polypropylene body stand up to aggressive and corrosive solutions.

Streamline your installation and removal process. These valves give you the leak-tight permanent connection of a socket connect with the ease of fittings that come apart.

Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.

Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings.

A threaded union on these valves makes them easy to install and remove without disrupting your line. They meet NSF/ANSI 61 for safe use in drinking water systems.

Disassemble the union fittings on these valves for fast installation and removal from your pipeline. All meet NSF/ANSI 61 for use with drinking water.

Ideal for lines that need frequent maintenance, these valves have union fittings that disassemble quickly for removal. They meet NSF/ANSI 61 for use with drinking water.

Made of brass, these valves are more durable than plastic valves. Push tubing into the fittings and an internal gripping ring and O-ring hold it tight—no heat, solder, or flux required. These valves meet NSF/ANSI 61 for use in drinking water systems.

Connect these valves to tubing with a ring and a crimping tool. They meet the strict standards of NSF/ANSI 61, so they’re safe to use with drinking water.

No need to completely remove these valves from your line for servicing. The bolted three-piece body comes apart, so you can easily access their internal components. Fire-tested to meet American Petroleum Institute (API) 607, these valves securely isolate diesel fuel, fuel oil, kerosene, and gasoline to prevent the spread of fire.

Install these valves to start and stop the flow of diesel fuel, fuel oil, kerosene, and gasoline. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.

With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.

Designed to withstand extremely cold liquid gases, these valves are ideal for liquid nitrogen cooling systems and liquified gas storage. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.

For use in general purpose applications with water, oil, and inert gas.

For general purpose applications with water, oil, and inert gas.

Separate the union fittings on each end of these valves for fast installation and removal from pipelines.

Insert unthreaded pipe into the socket ends and bond with PVC primer and cement to create a permanent, leak-tight connection.

Control flow in two directions from a single source—these valves have two handles for independent operation of each outlet. Use them with water, oil, and inert gas.

There’s no need to unbolt these valves for cleaning—remove the handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body for diverting flow in chemical-processing applications.

For easy installation and removal from pipelines, all ends on these valves have union fittings that disassemble into multiple pieces. Their fluoroelastomer seal and plastic body can withstand aggressive and corrosive solutions for diverting flow between ports in chemical-processing applications.

Often installed on petroleum loading arms to test fuel quality without interrupting flow, these valves are fire-tested to meet American Petroleum Institute (API) 607, Edition 5, for securely isolating fluid and preventing the spread of fire.

The motor on these valves can handle diverting applications with high flow rates and pressures. They operate on electricity to automatically divert flow between ports.

Attach these valve bodies to your actuator to automatically or manually control flow in your line.