About On/Off Valves
More
Miniature Threaded On/Off Valves
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: EPDM Rubber
With 10-32 UNF threads and a body less than 3/4” long, these valves are often used to control flow in miniature pipelines. They have a 303 stainless steel body for good corrosion resistance. All are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
303 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
UNF Female × UNF Female | |||||||
| 10-32 | 0.1 | 250 psi @ 150° F | -60° to 300° | 25 | 11/16" | 0000000 | 0000000 |
Miniature Threaded On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
To withstand aggressive and corrosive solutions in miniature chemical-processing pipelines, these tiny valves have a chemical-resistant fluoroelastomer seal and a corrosion-resistant 303 stainless steel body. They are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
303 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
UNF Female × UNF Female | |||||||
| 10-32 | 0.1 | 250 psi @ 150° F | 0° to 400° | 25 | 11/16" | 0000000 | 0000000 |
On/Off Valves with 37° Flared Tube Fittings for Fuel
- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline
- Seal Material: PTFE Plastic
These valves have 37° flared tube fittings that form a tight seal on metal tubing lines to transfer diesel fuel, fuel oil, and gasoline. All are full port, so they do not restrict flow.
| Thread Size | For Tube OD | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Aluminum Body | ||||||
|---|---|---|---|---|---|---|
37° Flared × 37° Flared | ||||||
| 9/16"-18 | 3/8" | 200 psi @ 70° F | -40° to 250° | 2 9/16" | 0000000 | 0000000 |
| 3/4"-16 | 1/2" | 200 psi @ 70° F | -40° to 250° | 2 11/16" | 0000000 | 000000 |
| 7/8"-14 | 5/8" | 200 psi @ 70° F | -40° to 250° | 3 1/4" | 0000000 | 000000 |
| 1 1/16"-12 | 3/4" | 200 psi @ 70° F | -40° to 250° | 3 7/16" | 0000000 | 000000 |
| 1 5/16"-12 | 1" | 200 psi @ 70° F | -40° to 250° | 4 5/16" | 0000000 | 000000 |
On/Off Valves with Solder-Connect Fittings for Refrigerant
- Valve Type: Ball
- For Use With: Refrigerant
- Seal Material: PTFE Plastic
- Specifications Met: UL Listed, C-UL Listed, CE Marked
Install these valves in HVAC and refrigeration systems to control CO₂. They are operated with a wrench to give you the leverage needed to manage the flow of highly pressurized gases common in refrigeration systems. Because they require a wrench, these valves can’t be opened accidentally when bumped or snagged. Solder them to metal tubing for a permanent, leak-tight connection. To monitor pressure or fluid flow, attach a gauge to the port. The port can also be used to drain and divert liquid. These valves are full port, so they do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Gauge Ports | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Copper Tube Size | For Tube OD | No. of | Thread Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Drive Style | Drive Size | For Refrigerant No. | Each | |
Wrench-Operated Brass Body | ||||||||||||||
Solder Connect × Solder Connect | ||||||||||||||
| 1/8 | 1/4" | 1 | 7/16"-20 | Male | UNF | 1 | 2,030 psi @ 300° F | -40° to 300° | 5" | External Hex | 13/16" | R-744 | 0000000 | 0000000 |
| 1/4 | 3/8" | 1 | 7/16"-20 | Male | UNF | 4.3 | 2,030 psi @ 300° F | -40° to 300° | 5 1/4" | External Hex | 13/16" | R-744 | 0000000 | 000000 |
| 3/8 | 1/2" | 1 | 7/16"-20 | Male | UNF | 6.2 | 2,030 psi @ 300° F | -40° to 300° | 5 1/2" | External Hex | 13/16" | R-744 | 0000000 | 000000 |
| 1/2 | 5/8" | 1 | 7/16"-20 | Male | UNF | 12.1 | 2,030 psi @ 300° F | -40° to 300° | 5 7/8" | External Hex | 13/16" | R-744 | 0000000 | 000000 |
| 5/8 | 3/4" | 1 | 7/16"-20 | Male | UNF | 19 | 2,030 psi @ 300° F | -40° to 300° | 5 7/8" | External Hex | 15/16" | R-744 | 0000000 | 000000 |
| 3/4 | 7/8" | 1 | 7/16"-20 | Male | UNF | 27.5 | 2,030 psi @ 300° F | -40° to 300° | 7 5/16" | External Hex | 15/16" | R-744 | 0000000 | 000000 |
| 1 | 1 1/8" | 1 | 7/16"-20 | Male | UNF | 48 | 2,030 psi @ 300° F | -40° to 300° | 7 5/16" | External Hex | 1 1/8" | R-744 | 0000000 | 000000 |
| 1 1/4 | 1 3/8" | 1 | 7/16"-20 | Male | UNF | 77 | 2,030 psi @ 300° F | -40° to 300° | 8 1/8" | External Hex | 1 1/8" | R-744 | 0000000 | 000000 |
| 1 1/2 | 1 5/8" | 1 | 7/16"-20 | Male | UNF | 96 | 2,030 psi @ 300° F | -40° to 300° | 9 1/2" | External Hex | 1 1/8" | R-744 | 0000000 | 000000 |
| 2 | 2 1/8" | 1 | 7/16"-20 | Male | UNF | 198 | 2,030 psi @ 300° F | -40° to 300° | 10 7/8" | External Hex | 1 5/8" | R-744 | 0000000 | 000000 |
Safety-Lockout Air On/Off Valves
A padlock (not included) locks the handle of these valves in the shut-off position. When valves are closed, the exhaust port vents air pressure so you can disconnect air tools safely. They meet OSHA lockout requirements to maintain safety and control in a compressed air system.
Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.
Valves that comply with OSHA 29 CFR 1910.147 meet standards for the control of energy sources that could injure workers.
Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inlet Pipe Size | Outlet Pipe Size | Exhaust Thread Size | Flow Coefficient (Cv) | Max. Pressure, psi | Temp. Range, °F | Lg. | Wd. | Ht. | For Max. Padlock Shackle Dia. | Specifications Met | Each | |
Brass Body | ||||||||||||
| 1/4 | 1/4 | 10-32 | 6.29 | 200 | -40° to 350° | 4 5/8" | 1 1/8" | 2 5/8" | 9/32" | OSHA Compliant 29 CFR 1910.147 | 0000000 | 000000 |
| 3/8 | 3/8 | 10-32 | 6.99 | 200 | -40° to 350° | 4 5/8" | 1 1/8" | 2 5/8" | 9/32" | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
| 1/2 | 1/2 | 10-32 | 19 | 200 | -40° to 350° | 4 15/16" | 1 5/16" | 2 13/16" | 9/32" | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
| 3/4 | 3/4 | 10-32 | 34.4 | 200 | -40° to 350° | 5 13/16" | 1 9/16" | 3 5/16" | 9/32" | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
| 1 | 1 | 10-32 | 50.1 | 200 | -40° to 350° | 6 3/16" | 1 15/16" | 3 11/16" | 9/32" | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |