Nylon Plastic Flowmeters

Filter by

System of Measurement

Maximum Flow

Pipe Size

For Use With

Calibrated With

Minimum Flow

Flow Measurement Unit

Measures

Output Signal Type

Connects To

Wetted Parts Material

Body Material

Glass-Filled Polypropylene

Thread Type

Display Type

Electrical Connection

Wire Leads

Maximum Pressure @ Temperature

Flow Measurement Type

Paddle

Positive Displacement

Output Current

RoHS

Fitting Connection

Measurement Unit

REACH

Fitting Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

22 Products

Flow Transmitters

Turbine Flow

Measurement

Send flow rate measurements to monitor and control equipment. Also known as transducers, these transmitters convert flow rate measurements to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs). As flow increases, the output signal increases. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range. Mount them directly inline with your system. They measure flow correctly no matter their mounting orientation.

These transmitters are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

Turbine Flow Measurement—Turbine transmitters measure flow by counting how many times their turbine turns as liquid passes through. To avoid clogging the turbine and other damage, use them only with clean, low-viscosity liquids. The digital output sends flow data with a pulse, which is a spike of voltage. The higher the flow, the more pulses they send. The voltage of the pulse output matches the input voltage sent to the transmitters. These transmitters meet NSF/ANSI 61 for use with drinking water.

	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Temp. Range, ° F	Input Voltage Range, V DC	Mounting Position	Field Recalibratable	Pulse Freq., Hz		Each
One Analog Transmitter/Digital Pulse Output—Wire Lead Connection







	Nylon Body with Nylon Fitting

	Turbine	1/4 NPT Male	0.026 to 0.65	1 3/4"	±3%	362 psi @ 212° F	-4 to 212	5 to 24	Any Angle	No	36 to 902	4386N201	0000000


	Turbine	3/8 NPT Male	0.13 to 1.3	2 5/32"	±3%	362 psi @ 212° F	-4 to 212	5 to 24	Any Angle	No	56 to 565	4386N202	000000
	Turbine	3/8 NPT Male	0.26 to 4	2 5/32"	±3%	362 psi @ 212° F	-4 to 212	5 to 24	Any Angle	No	36 to 553	4386N203	000000
	Turbine	3/8 NPT Male	0.53 to 9.2	2 5/32"	±3%	362 psi @ 212° F	-4 to 212	5 to 24	Any Angle	No	25 to 435	4386N204	000000
	Turbine	3/4 NPT Male	1.32 to 17.17	2 15/16"	±3%	362 psi @ 212° F	-4 to 212	5 to 24	Any Angle	No	17 to 227	4386N205	000000

Flowmeter/Totalizers

Determine the flow rate and total volume of liquid flowing through your system with the same meter. To measure flow, these flowmeter/totalizers count how many times their turbine turns as liquid passes through. Use them only with clean, low-viscosity liquids to avoid clogging the turbine and other damage to these flowmeter/totalizers. You can reset the batch total, but you can’t reset the cumulative total. Mount them inline with your pipe system. They’re accurate in any mounting orientation.

These flowmeter/totalizers are either calibrated with water or solvent. You can recalibrate them in the field to other liquids, pipe, and operating conditions.

Choose a fitting material that is compatible with the liquid you're running through your line. IP rated, all seal out dust and can be lightly rinsed.

Nylon Body with Nylon Fittings and 316 Stainless Steel Seal


	Shown with 90° Display Adapter Kit

Nylon fittings work with a wide range of chemicals. However, they can crack from impact or when overtightened.

Calibration Certificate Traceable to NIST—Flowmeter/totalizers with a calibration certificate traceable to NIST include documentation that states that they’ve passed a test for accuracy.

NEMA 4 Enclosure Rating—NEMA 4 flowmeter/totalizers protect against weather and washdowns.

FM Approved—FM-approved flowmeter/totalizers are safe for use in hazardous location.

						Max. Volume Displayed			Temp., ° F
	Connections	Flow, gpm	Pipe Schedule	End-to-End Lg.	Accuracy	Total	Batch	Max. Pressure @ Temp.	Min.	Max.	Batteries Included	Enclosure Rating	Hazardous Location Rating	Certification		Each
Flowmeter/Totalizers



		1 NPT Female	0.3 to 3	80	4"	±1.5%	999,999 Gallons	999,999 Gallons	150 psi @ 70° F	14	140	Yes	IP65 NEMA 4	NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 AEx Ia IIC T4	FM Approved	4352K632	0000000


		Flowmeter/Totalizers with Calibration Certificate Traceable to NIST



				1 NPT Female	0.3 to 3	80	4"	±1.5%	999,999 Gallons	999,999 Gallons	150 psi @ 70° F	14	140	Yes	IP65 NEMA 4	NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 AEx Ia IIC T4	FM Approved	4352K232	000000

Accessories for Flowmeters

90° Display Adapter Kits

90° Display Adapter Kit

90° Display Adapter—90° display adapter kits let you rotate the meter’s display 90°, so you can read it easier when mounted vertically.

Includes	For Flow Measurement Type		Each
90° Display Adapter, 12 Screws, Nitrile Rubber O-Ring	Turbine	4352K101	000000

For Flow Measurement Type		Each
Turbine	4352K221	0000000

Flowmeter Output Modules

Output modules allow you to transmit flow data from flowmeter/totalizers to an external device such as a programmable logic controller (PLC), data recorder, logger, and remote display.

4-20 mA output modules have an analog output. As flow increases, the output signal from the transmitter increases. For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range.

Pulse output modules have a digital output. They transmit flow data using spikes of voltage that match the input voltage of the transmitter. The higher the flow, the more pulses they send.

Output Current, mA	No. of Wire Leads	Wire Lead Lg., ft.	Input Voltage, V DC	For Flow Measurement Type		Each
4 to 20	4	10	8 to 26	Turbine	4352K227	0000000

	Battery Size	Battery Chemistry	Battery Cap., mA·h	Pkg. Qty.
Disposable Battery


AAA	Alkaline	1,250	4	71455K62	00000

Totalizers with Digital Display

A digital display makes it easy to check both the total amount of liquid that’s flowed through and the batch total. These totalizers are useful in applications where water needs to be batched and dispensed. You can reset the batch total, but you can't reset the cumulative total. They measure flow volume by counting how many times their turbine turns as liquid flows through. To avoid clogging the turbine and other damage to these totalizers, use them only with clean, low-viscosity liquids. They’re accurate in any mounting orientation. Mount them inline with your pipe system. Rated IP65, they seal out dust and can be lightly rinsed.

These totalizers are calibrated with solvent. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from solvent.

			Max. Volume Displayed					Temp., ° F
	Connections	Flow	Total	Batch	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Seal Material	Mounting Position	Display Type	Batteries Included	Enclosure Rating		Each
Nylon Body







				Gallons

				1 NPT Female	3 gpm to 30 gpm	9,999 Gallons	9,999 Gallons	4"	±5%	150 psi @ 70° F	14	130	316 Stainless Steel	Any Angle	Digital	Yes	IP65	9978K75	0000000




						Liters

						1 NPT Female	10 L/min to 100 L/min	9,999 Liters	9,999 Liters	4"	±5%	150 psi @ 70° F	14	130	316 Stainless Steel	Any Angle	Digital	Yes	IP65	9978K76	000000




								Gallons and Liters

								1 NPT Female	0.3 gpm to 3 gpm	999,999 Gallons 999,999 Liters	999,999 Gallons 999,999 Liters	4"	±5%	150 psi @ 70° F	0	130	316 Stainless Steel	Any Angle	Digital	Yes	IP65	9978K81	000000

Totalizers


Nylon Body with 304 Stainless Steel/Nylon Fittings	Analog Display

Measure the total amount of liquid flowing through these totalizers. They total the volume by counting how many times their turbine turns as liquid flows through. To avoid clogging the turbine and other damage to the sensor, use them only with clean, low-viscosity liquids. Their total cannot be reset.

These totalizers are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

	Totalizers														Replacement Couplings
								Temp., ° F
	Connections	Flow, gpm	Maximum Total Volume Displayed	Inlet ID	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Seal Material	Mounting Position	Display Type		Each		Pair
Nylon Body with 304 Stainless Steel/Nylon Fittings



		1/2 NPT Male	0.25 to 13	9,999,999 Gallons	5/8"	10"	±1.5%	100 psi @ 70° F	35	120	Buna-N	Horizontal	Analog	4119K41	0000000	4119K77	000000


		3/4 NPT Male	0.25 to 22	9,999,999 Gallons	5/8"	11 1/2"	±1.5%	100 psi @ 70° F	35	120	Buna-N	Horizontal	Analog	4119K42	000000	4119K79	00000
		1 NPT Male	0.75 to 50	9,999,999 Gallons	3/4"	10 3/4"	±1.5%	100 psi @ 70° F	35	120	Buna-N	Horizontal	Analog	4119K43	000000	———	0
		1 1/2 NPT Male	2 to 100	9,999,999 Gallons	1 1/2"	9 5/8"	±1.5%	100 psi @ 70° F	35	120	Buna-N	Horizontal	Analog	4119K616	000000	———	0

Switches

Magnetically actuated switches send flow rate data. They create a pulse each time the switch closes. One pulse is equivalent to one gallon measured.

Wire Connection	No. of Wire Leads	Wire Lead Lg.	Output Signal Type	Digital Output Type	No. of Circuits Controlled	Switch Starting Position	Switch Designation	Max. Switching Current @ Voltage		Each
Wire Leads	2	60"	Digital	Pulse	1	1 Off	SPST	10 mA @ 24V AC 10 mA @ 24V DC	4119K61	000000

Totalizers for Oil

Measure the amount of light oil that flows through these totalizers. They use positive displacement, so they measure flow by passing specific volumes of liquid through a chamber. Their total can be reset. Manually or automatically turn them on, and they automatically shut down 40 seconds after flow stops. Their mounting orientation won’t affect their ability to measure flow correctly. Install these totalizers directly inline with your pipe system using the fittings on each end. The fittings are 316 stainless steel, so they resist impact better than plastic fittings.

These totalizers are calibrated with water. You can recalibrate them in the field to other liquids, pipe, and operating conditions.

Cannot Be Sold Outside North America—Products cannot be sold outside North America due to restrictions.

						Temp., ° F
	Connections	Flow, gpm	Maximum Total Volume Displayed	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Seal Material	Mounting Position	Ht.	Wd.	Dp.	Display Type	Batteries Included	Features	Cannot Be Sold To		Each
Nylon Body with 316 Stainless Steel Fittings



		1 NPT Male	2 to 30	999,999.9 Gallons 999,999.9 Liters 999,999.9 Ounces	±0.5%	60 psi @ 70° F	33	130	Viton® Fluoroelastomer	Any Angle	5"	6"	4"	Digital	Yes	Automatic Start and Stop	Outside North America	41935K48	0000000