Polypropylene Plastic Flowmeters

Filter by

System of Measurement

Pipe Size

For Use With

Body Material

Glass-Filled Polypropylene

Calibrated With

Display Type

Maximum Flow

Flow Measurement Unit

Minimum Flow

Wetted Parts Material

Fitting Material

Thread Type

Maximum Temperature

Fitting Connection

Mounting Location

Output Signal Type

Mounting Position

Maximum Pressure @ Temperature

RoHS

Minimum Temperature

Seal Material

Environment

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

56 Products

High-Temperature Flowmeters with Digital Display

Check the flow rate of liquids up to 200° F from an easy-to-read digital display instead of a scale or dial. These flowmeters measure flow by counting how many times their turbine turns as liquid flows through. To avoid clogging the turbine and other damage to these flowmeters, use them only with clean, low-viscosity liquids. Mount them inline with your pipe system. Their fittings are polypropylene, which works with a wide range of chemicals. NEMA and IP rated, these flowmeters stand up to dust, weather, corrosion, and water from washdowns.

These flowmeters are calibrated with water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.

						Temp., ° F
	Flow, gpm	End-to-End Lg.	Overall Ht.	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Seal Material	Mounting Position	Batteries Included	Enclosure Rating		Each
Polypropylene Body with Polypropylene Fittings







				3/8 NPT Male

				0.4 to 4	4 3/4"	5 3/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K17	0000000


				0.8 to 8	4 3/4"	5 3/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K11	000000




						1/2 NPT Male

						2 to 20	5 1/8"	5 3/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K12	000000




								3/4 NPT Male

								3 to 30	5 1/4"	5 5/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K13	000000




										1 NPT Male

										5 to 50	5 5/8"	5 5/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K14	000000




												1 1/2 NPT Male

												6 to 60	6 1/2"	6 1/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K15	000000




														2 NPT Male

														10 to 100	6 3/4"	6 3/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K16	000000


														20 to 200	6 3/4"	6 3/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Yes	IP56 NEMA 4X	3562K18	000000

Replacements for Flowmeters

Component		Each
Axle	3562K115	000000

Component		Each
Paddle-Axle Kit	3562K111	0000000

Flow Transmitters with Sight

Send flow rate data using these transmitters while also being able to visually confirm liquid is flowing. They measure flow by counting how many times the turbine turns as the liquid moves through it. To prevent clogging the turbine and other damage, use them only with clean, low-viscosity liquids. These transmitters, also known as transducers, convert the flow measurement to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs), to monitor flow or control equipment. Mount them directly inline with your system. They measure accurately in any mounting orientation.

These transmitters are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

Digital Pulse Output—Transmitters with a digital pulse output send flow data using spikes of voltage that match the input voltage of the transmitter. The higher the flow, the more pulses they send.

	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Temp. Range, ° F	Seal Material	Input Voltage Range, V DC	Mounting Position	Field Recalibratable	Pulse Freq., Hz		Each
One Digital Pulse Output—Wire Lead Connection







	Polypropylene Body with Polypropylene Fitting

	Turbine	1/4 NPT Female	0.1 to 5	3 1/16"	±7%	100 psi @ 70° F	33 to 180	Fluoroelastomer	4.25 to 24	Any Angle	No	15 to 225	9687K11	0000000


	Turbine	1/2 NPT Female	1.5 to 20	3 1/16"	±15%	100 psi @ 70° F	33 to 180	Fluoroelastomer	4.25 to 24	Any Angle	No	15 to 225	9687K12	000000

High-Temperature Flowmeter/Totalizers

With one meter, these flowmeter/totalizers measure the flow rate and total flow volume of high-temperature liquid up to 200° F. They count how many times their turbine turns as liquid passes through to measure flow. To avoid clogging the turbine and other damage to the sensor, use them only with clean, low-viscosity liquids. The batch total can be reset after each metering application. They come set for batch totalization, but you can disable the reset function to operate as a cumulative totalizer. They measure flow correctly no matter the mounting orientation.

These flowmeter/totalizers are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

											Flowmeter/Totalizers
					Max. Volume Displayed						Temp., ° F
	Connections	Flow, gpm	End-to-End Lg.	Accuracy	Total	Batch	Max. Pressure @ Temp.	Mounting Position	Batteries Included	Enclosure Rating	Min.	Max.		Each
Turbine Flow Measurement







				Polypropylene Body with Polypropylene Fitting and Fluoroelastomer Seal

				3/8 NPT Male	0.8 to 8	4 3/4"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K31	0000000


				1/2 NPT Male	2 to 20	5 1/8"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K32	000000
				3/4 NPT Male	3 to 30	5 1/4"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K33	000000
				1 NPT Male	5 to 50	5 5/8"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K34	000000
				1 1/2 NPT Male	6 to 60	6 1/2"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K35	000000
				2 NPT Male	10 to 100	6 3/4"	±2%	99,999.9 Gallons	999,999 Gallons	300 psi @ 70° F	Any Angle	Yes	IP56 NEMA 4X	33	200	3562K36	000000

Replacements for Flowmeters

Component		Each
Axle	3562K115	000000

Component		Each
Paddle-Axle Kit	3562K111	0000000

Flow Sights with Indicator for Water and Oil

Rotor Indicator

Front Window

The indicator moves when flow is present, so it’s easy to visually confirm flow from a distance.

Rotor Indicator—Rotor indicator is the most obvious indicator of flow for maximum visibility.

Polypropylene Body—Sights with a polypropylene body are lighter than sights with a metal body.

					Window						Indicator
	Pipe Size	Thread Type	Gender	Temp. Range, ° F	Dia.	Type	End-to-End Lg.	Ht.	Max. Pressure @ Temp.	Direction of Flow	Material	Color	For Use With		Each
Rotor Indicator







				Polypropylene Body

				1/4	NPT	Female	-20 to 180	1 1/2"	Front	3"	2 1/2"	100 psi @ 70° F	Left to Right, Right to Left	Nylon	Blue	Water, Oil	80135K21	000000


				1/4	NPT	Female	-20 to 180	1 1/2"	Front	3"	2 1/2"	100 psi @ 70° F	Left to Right, Right to Left	Nylon	Orange	Water, Oil	80135K11	00000
				1/2	NPT	Female	-20 to 180	1 1/2"	Front	3"	2 1/2"	100 psi @ 70° F	Left to Right, Right to Left	Nylon	Blue	Water, Oil	80135K22	00000
				1/2	NPT	Female	-20 to 180	1 1/2"	Front	3"	2 1/2"	100 psi @ 70° F	Left to Right, Right to Left	Nylon	Orange	Water, Oil	80135K12	000000

Fixed-Set-Point Flow Switches


Style A	Style B

Style D	Style E

Since they come factory set to a specific set point, these switches are easier to install than adjustable flow switches. As flowing liquid pushes an internal piston, the switch reads the position of the piston to measure the flow. When the piston passes the set point, the switch actuates. They’re accurate in any mounting position.

These switches are calibrated with and measure water accurately. They can also be used with other liquids by applying your liquid’s specific-gravity conversion factor to calculate the new set point.

Choose a fitting material that is compatible with the liquid you intend to run through your line.

Straight


Style A	Style B

Polypropylene Fitting—Polypropylene and PPS fittings work with a wide range of chemicals. However, they can crack from impact or when overtightened.

SPST—SPST (single pole, single throw) switches turn one device from off to on (normally open).

	Gender	Set Point, gpm	Approx. Difference Between Set Point and Reset Point, gpm	Max. Pressure @ Temp.	Temp. Range, ° F	Max. Switching Current @ Voltage	End-to-End Lg.	Mounting Position		Each
Polypropylene Body with Polypropylene Fittings







	SPST

	A	1/4	NPT	Female	0.1	0.1	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	4 7/8"	Any Angle	2371K41	000000


	A	1/4	NPT	Female	0.25	0.25	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	4 7/8"	Any Angle	2371K42	00000
	A	1/4	NPT	Female	0.5	0.5	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	4 7/8"	Any Angle	2371K43	00000
	A	1/4	NPT	Female	0.75	0.75	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	4 7/8"	Any Angle	2371K44	00000
	A	1/4	NPT	Female	1	1	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	4 7/8"	Any Angle	2371K45	00000
	B	3/8	NPT	Male	0.25	0.05	125 psi @ 70° F	33 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	4"	Any Angle	42015K21	00000
	B	3/8	NPT	Male	0.5	0.1	125 psi @ 70° F	33 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	4"	Any Angle	42015K22	00000
	B	3/8	NPT	Male	1	0.2	125 psi @ 70° F	33 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	4"	Any Angle	42015K23	00000
	B	3/8	NPT	Male	1.5	0.3	125 psi @ 70° F	33 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	4"	Any Angle	42015K24	00000
	B	3/8	NPT	Male	2	0.4	125 psi @ 70° F	33 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	4"	Any Angle	42015K25	00000

90° Elbow


Style D	Style E

Polypropylene Fitting—Polypropylene and PPS fittings work with a wide range of chemicals. However, they can crack from impact or when overtightened.

SPST—SPST (single pole, single throw) switches turn one device from off to on (normally open).

	Gender	Set Point, gpm	Approx. Difference Between Set Point and Reset Point, gpm	Max. Pressure @ Temp.	Temp. Range, ° F	Max. Switching Current @ Voltage	Mounting Position		Each
Polypropylene Body with Polypropylene Fittings







	SPST

	D	1/4	NPT	Female	0.042	0.006	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	4553N15	000000


	D	1/4	NPT	Female	0.1	0.1	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	2371K21	00000
	D	1/4	NPT	Female	0.25	0.25	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	2371K22	00000
	D	1/4	NPT	Female	0.5	0.5	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	2371K23	00000
	D	1/4	NPT	Female	0.75	0.75	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	2371K24	00000
	D	1/4	NPT	Female	1	1	200 psi @ 70° F	33 to 194	500 mA @ 300V AC 700 mA @ 350V DC	Any Angle	2371K25	00000
	E	3/4	NPT	Female	0.25	0.05	100 psi @ 70° F	0 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	Any Angle	4553N13	000000
	E	3/4	NPT	Female	0.5	0.1	100 psi @ 70° F	0 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	Any Angle	42015K6	000000
	E	3/4	NPT	Female	1	0.2	100 psi @ 70° F	0 to 212	400 mA @ 30V AC 170 mA @ 120V AC 80 mA @ 240V AC 300 mA @ 30V DC 130 mA @ 120V DC 60 mA @ 240V DC	Any Angle	4553N14	000000

High-Temperature Totalizers with Digital Display

The digital display on these totalizers makes it easy to check the total amount of high-temperature liquid—up to 200° F—passing through your system. They measure flow volume by counting how many times their turbine turns as liquid passes through. To avoid clogging the turbine and other damage to these totalizers, use them only with clean, low-viscosity liquids. The batch total can be reset after each metering application. They come set for batch totalization, but you can disable the reset function to operate as a cumulative totalizer. They measure flow accurately no matter the mounting orientation. Rated NEMA 4X and IP65, they seal out dust and protect against washdowns and corrosion.

These totalizers are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

			Max. Volume Displayed					Temp., ° F
	Connections	Flow, gpm	Total	Batch	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Seal Material	Mounting Position	Display Type	Batteries Included	Enclosure Rating		Each
Polypropylene Body with Polypropylene Fittings



		3/8 NPT Male	0.8 to 8	99,999.9 Gallons	999,999 Gallons	4 3/4"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K21	0000000


		1/2 NPT Male	2 to 20	99,999.9 Gallons	999,999 Gallons	5 1/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K22	000000
		3/4 NPT Male	3 to 30	99,999.9 Gallons	999,999 Gallons	5 1/4"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K23	000000
		1 NPT Male	5 to 50	99,999.9 Gallons	999,999 Gallons	5 5/8"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K24	000000
		1 1/2 NPT Male	6 to 60	99,999.9 Gallons	999,999 Gallons	6 1/2"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K25	000000
		2 NPT Male	10 to 100	99,999.9 Gallons	999,999 Gallons	6 3/4"	±2%	300 psi @ 70° F	33	200	Fluoroelastomer	Any Angle	Digital	Yes	IP56 NEMA 4X	3562K26	000000

Replacements for Flowmeters

Component		Each
Axle	3562K115	000000

Component		Each
Paddle-Axle Kit	3562K111	0000000

Socket-Connect Flowmeter/Totalizers with Remote Display

Often used in hard-to-access areas, these flowmeter/totalizers have a display that can be placed up to 25 feet from the sensor. Use them to measure the rate and volume of liquid flowing through your system. They measure flow by counting how many times their turbine turns as liquid flows through. To avoid clogging the turbine and other damage to the sensor, use them only with clean, low-viscosity liquids. Batch totals are resettable but can be protected with a security code to prevent tampering. The reset function can also be disabled so that they operate as a cumulative totalizer. Cumulative totals cannot be reset. No matter the mounting orientation, they’ll measure flow correctly.

These flowmeter/totalizers are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.

For a complete unit, you’ll need a display, a sensor, and a tee fitting.

Sensors

Sensors thread onto the tee fitting.

	Sensors									Replacement Flowmeter Rotors		Replacement Flowmeter Rotor Pins
					Temp., ° F
	Connections	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Min.	Max.	Mounting Position		Each		Each		Each
Polypropylene Body



		1 1/4 NPSM	4.1"	±1%	180 psi @ 70° F	33	149	Any Angle	4114K222	0000000	4114K98	000000	4114K99	000000

Flow Switches with Sight

For monitoring flow at a glance, these switches have a plastic window with a rotor indicator that spins when there’s flow. They activate or deactivate equipment when the flow rate reaches your set point. Tighten or loosen the adjustment screw to choose your set point anywhere within the range. To measure flow, they count how many times the turbine turns as liquid flows through. Use them only with clean, low-viscosity liquids to prevent clogging the turbine and other damage. All are single pole, double throw (SPDT) and can either turn one device from off to on (normally open) or on to off (normally closed).

These switches are calibrated with water. They can also be used with other liquids but may not measure accurately if their viscosity is significantly different.

Choose a fitting material that is compatible with the liquid you're running through your line.

Polypropylene Fitting—Polypropylene fittings work with a wide range of chemicals. However, they can crack from impact or when overtightened.

Any-Angle Mount—Flow switches with any-angle mounting position will measure accurately no matter how you orient them in your system.

	Max. Switching Current @ Voltage	Mounting Position	End-to-End Lg.	Certification		Each
Polypropylene Body with Polypropylene Fittings







	1/4 NPT Female

	0.1 to 5	100 psi @ 70° F	33 to 180	95 mA @ 115V AC	Any Angle	3 1/16"	CE Marked UL Recognized Component	4138K11	0000000




			1/2 NPT Female

			0.25 to 2.5	150 psi @ 70° F	20 to 150	5 amp @ 120V AC 5 amp @ 240V AC	Horizontal	3 3/4"	CE Marked VDE Certified	4138K101	000000


			0.5 to 5	150 psi @ 70° F	20 to 150	5 amp @ 120V AC 5 amp @ 240V AC	Horizontal	3 3/4"	CE Marked VDE Certified	4138K102	000000
			1 to 10	150 psi @ 70° F	20 to 150	5 amp @ 120V AC 5 amp @ 240V AC	Horizontal	3 3/4"	CE Marked VDE Certified	4138K103	000000
			1.5 to 15	150 psi @ 70° F	20 to 150	5 amp @ 120V AC 5 amp @ 240V AC	Horizontal	3 3/4"	CE Marked VDE Certified	4138K104	000000
			1.5 to 20	100 psi @ 70° F	33 to 180	95 mA @ 115V AC	Any Angle	3 1/16"	CE Marked UL Recognized Component	4138K12	000000