About Flowmeters and Totalizers
Flowmeters measure the rate of flow for a liquid or a gas. Totalizers measure the cumulative flow volume. Flowmeter/totalizers display both the flow rate and the cumulative flow volume.
More
Any-Orientation Flowmeters
A spring piston instead of a float allows these flowmeters to measure flow rate in any mounting orientation. As liquid passes through, it pushes an indicator up the scale, showing you the flow rate. They have union fittings on both ends, making it easy to position the scale so it’s visible.
These flowmeters are calibrated with water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
Choose a fitting material that is compatible with the liquid you intend to run through your line. Polysulfone fittings work with a wide range of chemicals. However, they can crack from impact or when overtightened. Brass fittings resist impact better than polysulfone fittings.
For technical drawings and 3-D models, click on a part number.
| Flow Range, gpm | End-to-End Lg. | Accuracy | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Each | |
Polysulfone Plastic Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
1 NPTF Male Pipe Connection | |||||||||
| 0.5 to 4 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 0000000 |
| 1 to 7 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 10 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 16 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 3 to 18 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 4 to 28 | 5 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
Brass Fittings | |||||||||
1/2 NPTF Female Pipe Connection | |||||||||
| 0.5 to 4 | 7 3/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 7 | 7 3/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 10 | 7 3/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 16 | 7 3/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
3/4 NPTF Male Pipe Connection | |||||||||
| 0.5 to 4 | 8 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 10 | 8 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 1 to 16 | 8 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 4 to 28 | 8 1/4" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
1 1/2 NPTF Female Pipe Connection | |||||||||
| 2 to 25 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 5 to 50 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 7 to 75 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 10 to 100 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
2 NPTF Female Pipe Connection | |||||||||
| 2 to 25 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 5 to 50 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 7 to 75 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
| 10 to 100 | 8 13/16" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 000000 |
2 1/2 NPTF Female Pipe Connection | |||||||||
| 20 to 200 | 10 3/4" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 00000000 |
3 NPTF Female Pipe Connection | |||||||||
| 25 to 275 | 10 3/4" | ±5% | 325 psi @ 70° F | 33° to 250° | Polysulfone Plastic | Buna-N Rubber | Any | 00000000 | 00000000 |
High-Temperature Flowmeters
Measure the flow rate of high-temperature liquids. As your liquid flows through these flowmeters, it pushes an indicator up the scale, showing you the flow rate. Mount them vertically inline with your piping system, so liquid flows up from the bottom. They have union fittings, making it easy to position the scale so it’s visible. The fittings are plastic, so they work with a wide range of chemicals.
These flowmeters are calibrated using water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
Flow Range | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Gallons | Liters | Overall Ht. | Accuracy | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Features | Each | |
Polypropylene Plastic Fittings  | |||||||||||
3/8 NPT Female Pipe Connection | |||||||||||
| 0.1 to 1 gpm | 0.4 to 4 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 0000000 |
| 0.2 to 2 gpm | 1 to 7.5 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 1 to 10 gpm | 4 to 40 lpm | 10" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
Polysulfone Plastic Fittings | |||||||||||
3/8 NPT Female Pipe Connection | |||||||||||
| 0.5 to 5 gpm | 2 to 20 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
1/2 NPT Male Pipe Connection | |||||||||||
| 0.1 to 1 gpm | 0.4 to 4 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 0.2 to 2 gpm | 1 to 7.5 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 0.5 to 5 gpm | 2 to 20 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 1 to 10 gpm | 4 to 40 lpm | 10" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
3/4 NPT Male Pipe Connection | |||||||||||
| 0.1 to 1 gpm | 0.4 to 4 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 0.2 to 2 gpm | 1 to 7.5 lpm | 8 7/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 0.5 to 5 gpm | 2 to 20 lpm | 9 3/8" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 1 to 10 gpm | 4 to 40 lpm | 10" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
1 NPT Female Pipe Connection | |||||||||||
| 0.5 to 6 gpm | 2 to 22 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 1 to 10 gpm | 4 to 40 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 2 to 20 gpm | 6 to 76 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 3 to 30 gpm | 10 to 110 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 4 to 40 gpm | 15 to 155 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
2 NPT Female Pipe Connection | |||||||||||
| 2 to 20 gpm | 8 to 78 lpm | 18 7/8" | ±2% | 150 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 6 to 100 gpm | 20 to 380 lpm | 18 7/8" | ±2% | 150 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 20 to 130 gpm | 80 to 500 lpm | 18 7/8" | ±2% | 150 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
PVC Plastic Fittings | |||||||||||
1 1/2 NPT Female Pipe Connection | |||||||||||
| 0.5 to 6 gpm | 2 to 22 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 1 to 10 gpm | 4 to 40 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 2 to 20 gpm | 6 to 76 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 3 to 30 gpm | 23 to 115 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
| 4 to 40 gpm | 15 to 155 lpm | 14 1/2" | ±3% | 150 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 00000000 | 000000 |
Flowmeters for High-Purity Liquids
To avoid metal contaminating liquids, such as deionized water, these flowmeters are made entirely of plastic and rubber. As your liquid flows through, it pushes an indicator up the scale, showing you the flow rate. Mount these flowmeters vertically inline with your pipe system, so liquid flows up from the bottom. They have union fittings, making it easy to position the scale so it’s visible. The fittings are PVC, so they work with a wide range of chemicals.
These flowmeters are calibrated using water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
| Flow Range, gpm | Overall Ht. | Accuracy | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Features | Each | |
PVC Plastic Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
1/2 NPT Female Pipe Connection | ||||||||||
| 0.05 to 0.5 | 10" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 0000000 |
| 0.1 to 1 | 10" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
3/4 NPT Female Pipe Connection | ||||||||||
| 0.2 to 2.4 | 10" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 0.5 to 5 | 10" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
1 NPT Female Pipe Connection | ||||||||||
| 0.76 to 7.6 | 11 3/4" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 1 to 10 | 11 3/4" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 1.5 to 15 | 11 3/4" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
| 2 to 20 | 11 3/4" | ±6% | 150 psi @ 70° F | 33° to 130° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | Union Fittings | 0000000 | 000000 |
Socket-Connect Flowmeters
Easily install the unthreaded ends of these flowmeters into a PVC piping system. Bond the ends to PVC pipe with PVC cement and primer. They measure flow correctly no matter the mounting orientation. As liquid flows through the meter, it pushes an indicator up the scale, showing you the flow rate. They work with a wide range of chemicals since the fittings are made from PVC.
These flowmeters are calibrated with water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
For technical drawings and 3-D models, click on a part number.
| Flow Range, gpm | Overall Ht. | Accuracy | For Pipe Schedule | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Each | |
PVC Plastic Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 Male Pipe Connection | ||||||||||
| 0.5 to 4 | 8 1/2" | ±5% | 40, 80 | Not Rated | 32° to 140° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 0000000 |
| 1 to 10 | 8 1/2" | ±5% | 40, 80 | Not Rated | 32° to 140° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 3 to 18 | 8 1/2" | ±5% | 40, 80 | Not Rated | 32° to 140° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
| 4 to 28 | 8 1/2" | ±5% | 40, 80 | Not Rated | 32° to 140° | Polysulfone Plastic | Buna-N Rubber | Any | 0000000 | 000000 |
High-Temperature Panel-Mount Flowmeters
Install these flowmeters in an instrument panel to measure the flow rate of hot water and other liquids reaching up to 212° F. They should be mounted vertically, so liquid flows up from the bottom. As liquid flows through, it pushes an indicator up the scale, showing you the flow rate.
These flowmeters are calibrated with water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
Flowmeters with a flow-control knob let you open and close the inlet valve to adjust the flow rate within the range.
For technical drawings and 3-D models, click on a part number.
Flow Range | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| gpm | lpm | Overall Ht. | Ctr.-to-Ctr. Ht. | Accuracy | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Each | |
Flowmeters | |||||||||||
Polysulfone Plastic Fittings | |||||||||||
3/8 NPT Male Pipe Connection | |||||||||||
| 0.025 to 0.25 | 0.1 to 1 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 0000000 |
| 0.1 to 1 | 0.4 to 4 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.2 to 2 | 0.75 to 7.5 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.5 to 5 | 1.8 to 18 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
1/2 NPT Male Pipe Connection | |||||||||||
| 0.025 to 0.25 | 0.1 to 1 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.1 to 1 | 0.4 to 4 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.2 to 2 | 0.75 to 7.5 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.5 to 5 | 1.8 to 18 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
3/4 NPT Male Pipe Connection | |||||||||||
| 1 to 10 | 5 to 37.5 | 8" | 6 13/16" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
Flowmeters with Flow-Control Knob | |||||||||||
Polysulfone Plastic Fittings | |||||||||||
3/8 NPT Male Pipe Connection | |||||||||||
| 0.025 to 0.25 | 0.1 to 1 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.1 to 1 | 0.4 to 4 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.2 to 2 | 0.75 to 7.5 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.5 to 5 | 1.8 to 18 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
1/2 NPT Male Pipe Connection | |||||||||||
| 0.025 to 0.25 | 0.1 to 1 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.1 to 1 | 0.4 to 4 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.2 to 2 | 0.75 to 7.5 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
| 0.5 to 5 | 1.8 to 18 | 7" | 6" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
3/4 NPT Male Pipe Connection | |||||||||||
| 1 to 10 | 5 to 37.5 | 8" | 6 13/16" | ±4% | 175 psi @ 70° F | 33° to 212° | Polysulfone Plastic | Fluoroelastomer Rubber | Vertical | 0000000 | 000000 |
Any-Orientation Flowmeters for Oil
With a spring piston instead of a float, these flowmeters measure the flow rate of oil in any mounting orientation. As oil flows through, it pushes an indicator up the scale, showing you the flow rate. Install them inline with your piping system with the fittings on both ends. They’re union fittings, making it easy to position the scale so it’s visible.
These flowmeters are calibrated with oil but can be used with other liquids. If you’re using these with a liquid other than oil, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.
Choose a fitting material that is compatible with the liquid you intend to run through your line. Polysulfone fittings work with a wide range of chemicals. However, they can crack if hit or bumped or when overtightened. Brass fittings resist impact better than polysulfone fittings.
For technical drawings and 3-D models, click on a part number.
| Flow Range, gpm | End-to-End Lg. | Accuracy | Max. Pressure | Temp. Range, °F | Body Material | Seal Material | Mounting Orientation | Features | Each | |
Polysulfone Plastic Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
1/2 NPTF Female Pipe Connection | ||||||||||
| 0.5 to 5 | 7 3/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 0000000 |
| 1 to 10 | 7 3/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
3/4 NPTF Female Pipe Connection | ||||||||||
| 1 to 10 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
| 1 to 15 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
1 NPTF Female Pipe Connection | ||||||||||
| 1 to 15 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
| 3 to 30 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
Brass Fittings | ||||||||||
1/2 NPTF Female Pipe Connection | ||||||||||
| 0.5 to 5 | 7 3/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
| 1 to 10 | 7 3/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
3/4 NPTF Female Pipe Connection | ||||||||||
| 1 to 10 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
| 1 to 15 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
1 NPTF Female Pipe Connection | ||||||||||
| 1 to 15 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |
| 3 to 30 | 7 9/16" | ±5% | 325 psi @ 70° F | 33° to 200° | Polysulfone Plastic | Fluoroelastomer Rubber | Any | Union Fittings | 0000000 | 000000 |