Bolt-On Aerating Vibrators
Install from inside your tank and secure with the included mounting bolt. It vibrates as air passes between the pad and bin wall to create flow in your bin or hopper to dislodge compacted material. Use with dry, powdery materials such as cement, starch, and clay. For large containers, mount several aerators in rows set 6" to 18" apart.
For technical drawings and 3-D models, click on a part number.
Inlet Air Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air Pressure Range, psi | Pipe Size  | Thread Type | Gender | Duty Cycle | Stud Material | Max. Temp, °F | For Mounting Hole Dia. | Mounting Fasteners Included | Dia. | Dp. | Each | |
Silicone Rubber | ||||||||||||
| 5-30 | 1/4 | NPT | Female | Continuous | 303 Stainless Steel | 400° | 3/4" | Yes | 4" | 2 3/4" | 00000000 | 000000 |
Neoprene Rubber | ||||||||||||
| 5-30 | 1/4 | NPT | Female | Continuous | 303 Stainless Steel | 210° | 3/4" | Yes | 4" | 2 3/4" | 00000000 | 00000 |
Easy-Maintenance Weld-On Aerating Vibrators
When access to the inside of your tank is difficult, this vibrator can be installed and removed from outside of the bin for easier cleaning than bolt-on aerating vibrators. Also known as a fluidization nozzle, it creates flow in your bin or hopper by combining vibration and aeration to dislodge compacted material. It is often used with dry, powdery materials such as cement, starch, and clay. Use continuous air to aerate your bin. They can be used in a system with a timer and solenoid valve to create a vibrating or pulsing action. To install, insert the bushing through a hole in the bin wall until it's flush with the inside of the wall. Then weld it in place, thread the nozzle into the bushing and connect your air supply. For large containers, mount several aerators in rows set 6" to 18" apart.
For technical drawings and 3-D models, click on a part number.
Inlet Air Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air Pressure Range, psi | Pipe Size | Thread Type | Gender | Duty Cycle | Body Material | Max. Temp, °F | For Mounting Hole Dia. | Dia. | Dp. | Includes | Each | |
| 2-5 | 1/2 | BSPP | Female | Continuous | Steel | 280° | 1 7/8" | 1 3/4" | 2 3/4" | Bushing | 00000000 | 000000 |
Air-Powered Aerators
Connect to a compressed air line. The notches at the base create small bubbles for uniform aeration. Also known as a diffuser and an air bubbler, it is often used in wastewater treatment.
For technical drawings and 3-D models, click on a part number.
Air Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Pipe Size | Thread Type | Gender | Material | Diaphragm Material | Max. Pressure | Each | |
| 5" | 4 1/2" | 1/2 | NPT | Male | ABS Plastic | Rubber | 9 psi @ 70° F | 0000000 | 000000 |
Electric Aerators
A rubber air diffuser provides uniform bubble distribution. Use these aerators to introduce air into the contents of your tank.
For technical drawings and 3-D models, click on a part number.
Hose | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Material | Ht. | Wd. | Dp. | Max. Water Dp., ft. | Current, A | Frequency, Hz | Cord Lg., ft. | Max. Pressure @ Temp. | Duty Cycle | Housing Material | Includes | Each | |
120V AC Single Phase—Three-Prong Plug | ||||||||||||||
| 5 | PVC Plastic | 6 11/16" | 8" | 5 7/16" | 6 | 0.3 | 60 | 7 | 1 psi @ 70° F | Continuous | Aluminum | Air Pump | 0000000 | 0000000 |
| 10 | PVC Plastic | 6 11/16" | 8" | 5 7/16" | 6 | 0.3 | 60 | 7 | 1 psi @ 70° F | Continuous | Aluminum | Air Pump | 0000000 | 000000 |
| 20 | PVC Plastic | 6 11/16" | 8" | 5 7/16" | 6 | 0.3 | 60 | 7 | 1 psi @ 70° F | Continuous | Aluminum | Air Pump | 0000000 | 000000 |