Also known as pendant lights, these fixtures hang from a cord. Rated for use in damp locations, these lights withstand humidity and moisture. They work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Also known as troffers, these lights fit most standard drop-ceiling grids, so they’re often used in indoor spaces such as offices and storage rooms. They can be hardwired to operate on any of the voltages listed.

Lights with a parabolic lens are reflective to direct light downward and reduce glare. They require fluorescent bulbs (sold separately).

For technical drawings and 3-D models, click on a part number.

With a lower profile design than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving. Use them in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 40 ft. high. Rated for use in damp locations, these lights withstand humidity and moisture. They can be hardwired to operate on any of the voltages listed.

Style A and C lights require suspension hardware (sold separately), which includes two wire rope slings with hooks and two wire rope clamps. No tools required—adjust the length of the suspension hardware and tighten the clamps to secure.

Lights without bulbs work with tubular fluorescent bulbs (sold separately).

Lights with an aluminum housing are lightweight and resist corrosion better than those with a steel housing.

Install sockets for medium (standard household) screw-in base light bulbs.

Styles A-C mount to outlet boxes.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.

A sealed lens keeps moisture out to protect these lights against washdowns.

Style C have a tubular lens that allows light to shine from all directions. The lens is acrylic so it won’t turn yellow over time. Lights meet NSF/ANSI 2 for use in food handling and processing areas.

Lights without bulbs work with tubular fluorescent bulbs (sold separately).

These lights are UL listed or CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They have a sealed lens and can be hardwired to operate on any of the voltages listed.

Style 3 withstand hazardous material under normal operating conditions. Housed in lightweight aluminum, they suspend from the ceiling with two female threaded connections that thread onto ½ NPT conduit. These lights cannot be sold to Canada due to local energy efficiency requirements.

Lights with a cool appearance highlight white/blue tones that are good for inspecting.

All are IP66 rated for protection from washdowns. NEMA 4X rated lights protect their parts from corrosion.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately). They cannot be sold to California due to local energy efficiency requirements.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately). Lights with a zinc housing are more impact resistant than those with an aluminum housing.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

Connect the battery pack to your existing fluorescent light to convert it into an emergency backup light. They include a test switch to check that the bulbs and battery are working properly.

Kits that cannot be sold to the regions listed are resitricted by local energy efficiency requirements.

Hardwire these sockets to a power source.

For technical drawings and 3-D models, click on a part number.

Replace worn sockets in light fixtures. These sockets work with plug-in compact fluorescent and LED bulbs.

Push snap-on sockets onto fixture panels that are 0.023” to 0.039” thick.

Fastener-mount sockets provide more holding power than snap-on sockets so they withstand vibration better.

In addition to being more energy-efficient than magnetic ballasts, these electronic ballasts are lighter and quieter. Ballasts that can operate multiple bulbs may have more wires than you need. Cover unused wires with a wire nut.

Instant-start ballasts turn on immediately. They are the most energy-efficient, but shorten the bulb's life.

Programmed-start ballasts provide the longest bulb life, but take longer than instant-start ballasts to turn on. They are often used with motion-sensing light controls.

Ballasts that cannot be sold to Canada are restricted by local product labeling requirements.