Material Material |
|---|
|
Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
|---|
 |  |
| Tubing | Assortments |
Minimum ID After Shrinking Minimum ID After Shrinking |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Performance Properties Performance Properties |
|---|
|
Clarity Clarity |
|---|
 |  |
| Clear | Semi-Clear |
 | |
| Opaque |
Flexibility Flexibility |
|---|
 | Flexible |
 | Semi-Rigid |
 | Rigid |
Minimum Wall Thickness After Shrinking Minimum Wall ThicknessAfter Shrinking |
|---|
|
Shrink Temperature Shrink Temperature |
|---|
|
|
Dielectric Strength Dielectric Strength |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Specifications Met Specifications Met |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Liner Material Liner Material |
|---|
|
About Heat-Shrink Tubing
More
Easy-to-Remove Heat-Shrink Tubing
- Material: Fluoropolymer Plastic
- Shrink Ratio: See Table
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 420° F
- Temperature Range: Not Rated to 400° F
Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away. Made of fluoropolymer, it resists chemicals and withstands temperatures up to 400° F.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
High-Temperature Moisture-Seal Heat-Shrink Tubing
- Material: PTFE Plastic
- Shrink Ratio: See Table
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 660° F
- Temperature Range: -450° to 450° F
Create a moisture-resistant seal in applications where temperatures reach up to 450° F. The inner lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. Made of PTFE, it also resists abrasion and chemicals. Choose tubing with a larger shrink ratio to create a tight seal over irregularly shaped objects.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Shrink Ratio | Color | Each | Each | ||
| 0.07" | 0" | Not Rated | Not Rated | White | 00000000 | 00000 | 00000000 | 000000 |
| 0.19" | 0.07" | 0.02" | 2.7:1 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.24" | 0.15" | 0.02" | 1.6:1 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.35" | 0.21" | 0.03" | 1.7:1 | White | 00000000 | 00000 | 00000000 | 00000 |
| 0.48" | 0.32" | 0.03" | 1.5:1 | White | 00000000 | 00000 | 00000000 | 000000 |
| 0.7" | 0.5" | 0.04" | 1.4:1 | White | 00000000 | 00000 | 00000000 | 000000 |
| 1" | 0.7" | 0.05" | 1.4:1 | White | 00000000 | 00000 | 00000000 | 000000 |
High-Temperature Heat-Shrink Tubing
Use this tubing in applications where temperatures reach up to 500° F. It’s often used to insulate electronic components. Tubing resists abrasion and chemicals.
Semi-rigid tubing bends only slightly. PTFE tubing is more chemical resistant than PEEK.
SAE AMS-DTL-23053/12 tubing meets requirements for material quality.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 660° F
- Temperature Range: -450° to 500° F
- Flexibility: Semi-Rigid
ID | 1/2 ft. Lg. | 4 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge | Specifications Met | Color | Each | Each | ||
| 0.03" | 0.02" | 0.009" | 30 | __ | White | 0000000 | 00000 | 0000000 | 00000 |
| 0.04" | 0.02" | 0.009" | 28 | __ | White | 0000000 | 0000 | 0000000 | 0000 |
| 0.05" | 0.02" | 0.01" | 26 | __ | White | 0000000 | 0000 | 0000000 | 0000 |
| 0.05" | 0.03" | 0.012" | 24 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.06" | 0.03" | 0.012" | 22 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.06" | 0.04" | 0.016" | 20 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.08" | 0.05" | 0.016" | 18 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.09" | 0.06" | 0.016" | 16 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.12" | 0.07" | 0.016" | 14 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.15" | 0.09" | 0.016" | 12 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.19" | 0.11" | 0.016" | 10 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.24" | 0.14" | 0.02" | 8 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.3" | 0.18" | 0.02" | 6 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.37" | 0.22" | 0.02" | 4 | SAE AMS-DTL-23053/12 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.43" | 0.28" | 0.02" | 2 | SAE AMS-DTL-23053/12 | White | 00000000 | 00000 | 00000000 | 00000 |
High-Shrink-Ratio High-Temperature Heat-Shrink Tubing
- Material: PTFE Plastic
- Shrink Ratio: 4:1
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 660° F
- Temperature Range: -450° to 500° F
- Specifications Met: SAE AMS-DTL-23053/12
This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. Made of PTFE, it withstands temperatures up to 500° F and resists abrasion and chemicals. It meets AMS/MIL-DTL-23053/12 for material quality.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 4 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
| 0.08" | 0.03" | 0.009" | White | 00000000 | 00000 | 00000000 | 00000 |
| 0.13" | 0.04" | 0.012" | White | 00000000 | 0000 | 00000000 | 0000 |
| 0.19" | 0.05" | 0.012" | White | 000000000 | 0000 | 000000000 | 0000 |
| 0.25" | 0.06" | 0.012" | White | 000000000 | 0000 | 000000000 | 0000 |
| 0.31" | 0.08" | 0.012" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.38" | 0.1" | 0.012" | White | 000000000 | 0000 | 000000000 | 0000 |
| 0.44" | 0.11" | 0.012" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.5" | 0.14" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.56" | 0.16" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.63" | 0.18" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.69" | 0.2" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.75" | 0.22" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 0.88" | 0.24" | 0.015" | White | 000000000 | 0000 | 000000000 | 00000 |
| 1" | 0.28" | 0.015" | White | 000000000 | 00000 | 000000000 | 00000 |
Thin-Wall High-Temperature Heat-Shrink Tubing
- Material: PTFE Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 655° F
- Temperature Range: -450° to 500° F
- Specifications Met: SAE AMS-DTL-23053/12
With thin walls, this tubing shrinks faster than other high-temperature tubing. Made of PTFE, it withstands temperatures up to 500° F and resists abrasion and chemicals. It’s also UV resistant, so it won’t fade in sunlight. This tubing meets SAE AMS-DTL-23053/12 for material quality.
Tubing with a 0.006" – 0.01" minimum wall thickness after shrinking is often used on extremely thin (0.014" - 0.038") guide wire to help maintain the thinness of the wire. It’s also good for splicing fiber optics—it minimizes damage to the fibers.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 4 ft. Lg. | ||||
|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | |
| 0.03" | 0.02" | 0.006" | White | 0000000 | 00000 |
| 0.04" | 0.02" | 0.006" | White | 0000000 | 0000 |
| 0.05" | 0.02" | 0.006" | White | 0000000 | 0000 |
| 0.06" | 0.03" | 0.006" | White | 0000000 | 0000 |
| 0.06" | 0.04" | 0.012" | White | 0000000 | 0000 |
| 0.07" | 0.04" | 0.006" | White | 0000000 | 0000 |
| 0.09" | 0.05" | 0.006" | White | 0000000 | 0000 |
| 0.09" | 0.06" | 0.012" | White | 0000000 | 0000 |
| 0.11" | 0.06" | 0.006" | White | 0000000 | 0000 |
| 0.12" | 0.07" | 0.008" | White | 0000000 | 0000 |
| 0.12" | 0.07" | 0.012" | White | 0000000 | 0000 |
| 0.14" | 0.08" | 0.008" | White | 0000000 | 0000 |
| 0.15" | 0.09" | 0.008" | White | 0000000 | 0000 |
| 0.15" | 0.09" | 0.012" | White | 0000000 | 0000 |
| 0.19" | 0.11" | 0.008" | White | 0000000 | 0000 |
| 0.19" | 0.11" | 0.012" | White | 0000000 | 0000 |
| 0.21" | 0.12" | 0.008" | White | 0000000 | 00000 |
| 0.24" | 0.14" | 0.008" | White | 0000000 | 00000 |
| 0.24" | 0.14" | 0.015" | White | 0000000 | 00000 |
| 0.27" | 0.15" | 0.008" | White | 0000000 | 00000 |
| 0.27" | 0.16" | 0.015" | White | 0000000 | 00000 |
| 0.3" | 0.18" | 0.015" | White | 0000000 | 00000 |
| 0.32" | 0.19" | 0.01" | White | 0000000 | 00000 |
| 0.32" | 0.2" | 0.015" | White | 0000000 | 00000 |
| 0.37" | 0.21" | 0.01" | White | 0000000 | 00000 |
| 0.43" | 0.27" | 0.01" | White | 0000000 | 00000 |
| 0.43" | 0.28" | 0.015" | White | 0000000 | 00000 |
| 0.47" | 0.35" | 0.012" | White | 0000000 | 00000 |
High-Strength Heat-Shrink Tubing
With excellent resistance to tears and cuts, this tubing withstands demanding use. It also resists chemicals.
PVDF tubing has an additive that makes it flame retardant, so it resists combustion and minimizes the spread of flames. FEP tubing is more chemical resistant than PVDF tubing, and withstands higher temperatures.
SAE AMS-DTL-23053/8 and SAE AMS-DTL-23053/11 tubing meets requirements for material quality.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: 900 V/mil
- Shrink Temperature: 350° F
- Temperature Range: -65° to 345° F
- Specifications Met: CSA Certified, Flame Rated VW-1, SAE AMS-DTL-23053/8, UL Recognized Component
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Pkg. Qty. | Pkg. | Each | ||
| 0.06" | 0.03" | 0.01" | Clear | __ | 000000 | 00 | 0000000 | 000000 |
| 0.13" | 0.06" | 0.01" | Clear | 10 | 0000000 | 000000 | 0000000 | 0000 |
| 0.25" | 0.13" | 0.01" | Clear | 10 | 0000000 | 00000 | 0000000 | 00000 |
| 0.38" | 0.19" | 0.01" | Clear | 10 | 0000000 | 00000 | 0000000 | 00000 |
| 0.5" | 0.25" | 0.01" | Clear | __ | 000000 | 00 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | Clear | 2 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | Clear | 1 | 0000000 | 00000 | 0000000 | 00000 |
- Shrink Ratio: See Table
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 420° F
- Temperature Range: -400° to 400° F
- Specifications Met: SAE AMS-DTL-23053/11
ID | ||||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge | For Wire Size | Color | Lengths, ft. | Per Ft. | |
1.3:1 Shrink Ratio | ||||||||
| 0.031" | 0.027" | 0.01" | 24 | __ | Clear | 00000000 | 00000 | |
| 0.036" | 0.032" | 0.01" | 22 | __ | Clear | 00000000 | 0000 | |
| 0.045" | 0.039" | 0.01" | 20 | __ | Clear | 00000000 | 0000 | |
| 0.06" | 0.049" | 0.01" | 18 | __ | Clear | 00000000 | 0000 | |
| 0.075" | 0.061" | 0.01" | 16 | __ | Clear | 00000000 | 0000 | |
| 0.092" | 0.072" | 0.01" | 14 | __ | Clear | 00000000 | 0000 | |
| 0.115" | 0.089" | 0.01" | 12 | __ | Clear | 00000000 | 0000 | |
| 0.141" | 0.114" | 0.01" | 10 | __ | Clear | 00000000 | 0000 | |
| 0.18" | 0.143" | 0.01" | 8 | __ | Clear | 00000000 | 0000 | |
| 0.225" | 0.18" | 0.01" | 6 | __ | Clear | 00000000 | 0000 | |
| 0.29" | 0.226" | 0.01" | 4 | __ | Clear | 00000000 | 0000 | |
| 0.365" | 0.28" | 0.01" | 2 | __ | Clear | 00000000 | 0000 | |
| 0.44" | 0.349" | 0.01" | 1/0 | __ | Clear | 00000000 | 0000 | |
| 0.58" | 0.448" | 0.02" | __ | 7/16" | Clear | 00000000 | 0000 | |
| 0.666" | 0.51" | 0.02" | __ | 1/2" | Clear | 00000000 | 0000 | |
| 0.83" | 0.637" | 0.03" | __ | 5/8" | Clear | 00000000 | 00000 | |
| 1" | 0.764" | 0.03" | __ | 3/4" | Clear | 00000000 | 00000 | |
| Each | ||||||||
1.6:1 Shrink Ratio | ||||||||
| 0.094" | 0.056" | 0.01" | __ | 3/32" | Clear | 4 | 00000000 | 00000 |
| 0.125" | 0.075" | 0.01" | __ | 1/8" | Clear | 4 | 00000000 | 00000 |
| 0.188" | 0.115" | 0.01" | __ | 3/16" | Clear | 4 | 00000000 | 00000 |
| 0.25" | 0.15" | 0.01" | __ | 1/4" | Clear | 4 | 00000000 | 00000 |
| 0.375" | 0.235" | 0.01" | __ | 3/8" | Clear | 4 | 00000000 | 00000 |
| 0.5" | 0.3" | 0.02" | __ | 1/2" | Clear | 4 | 00000000 | 00000 |
- Shrink Ratio: 1.3:1
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 420° F
- Temperature Range: -400° to 400° F
ID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
| 1.1" | 0.88" | 0.02" | Clear | 0000000 | ||||||
| 1.3" | 1" | 0.02" | Clear | 0000000 | ||||||
| 1.7" | 1.4" | 0.02" | Clear | 0000000 | ||||||
| 2.1" | 1.8" | 0.02" | Clear | 0000000 | ||||||
| 2.6" | 2.2" | 0.02" | Clear | 0000000 | ||||||
| 3.1" | 2.7" | 0.02" | Clear | 0000000 | ||||||
| 4.2" | 3.5" | 0.02" | Clear | 0000000 | ||||||
| 5.2" | 4.4" | 0.02" | Clear | 0000000 | ||||||
| 6.2" | 5.4" | 0.02" | Clear | 0000000 | ||||||
Flame-Retardant Abrasion-Resistant Heat-Shrink Tubing
- Material: PVDF Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 400 V/mil
- Shrink Temperature: 305° F
- Temperature Range: -65° to 300° F
- Specifications Met: UL Recognized Component, SAE AMS-DTL-23053/18 Class 2, Flame Rated VW-1
Made of PVDF, this tubing has excellent cut and abrasion resistance. A flame-retardant additive makes it combustion resistant and minimizes the spread of flames. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Tubing meets SAE AMS-DTL-23053/18 Class 2 for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Choose a Color | Pkg. Qty. | Pkg. | Each | ||
| 0.19" | 0.09" | 0.01" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
| 0.25" | 0.13" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.38" | 0.19" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.5" | 0.25" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | Black, Clear | 1 | 0000000 | 0000 | 0000000 | 00000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |
| 0.13"-1" ID Before Shrinking of Polyolefin (22 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive (31 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of PVDF (20 pieces, 7 sizes) | 73 | 1/2ft. | 2:1, 3:1 | 250° | Black, Clear, Red | 0000000 | 000000 |
| 0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes) | 150 | 1/2ft. | 2:1 | 195° to 350° | Black, Clear | 000000 | 000000 |
| 0.03"-0.43" ID Before Shrinking of PTFE (15 sizes) | 15 | 2" | 2:1 | 660° | White | 00000000 | 00000 |
| 0.03"-0.43" ID Before Shrinking of PTFE (15 sizes) | 15 | 3" | 2:1 | 660° | White | 00000000 | 00000 |
| 0.08"-1" ID Before Shrinking of PTFE (14 sizes) | 14 | 2" | 4:1 | 660° | White | 00000000 | 00000 |
| 0.08"-1" ID Before Shrinking of PTFE (14 sizes) | 14 | 3" | 4:1 | 660° | White | 00000000 | 00000 |
| 0.03"-1" ID Before Shrinking of FEP (17 sizes) | 17 | 2" | 1.3:1 | 420° | Clear | 00000000 | 00000 |
| 0.03"-1" ID Before Shrinking of FEP (17 sizes) | 17 | 3" | 1.3:1 | 420° | Clear | 00000000 | 00000 |