We will reply to your message within an hour.
Use these fittings for low-pressure applications in noncorrosive environments.
The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
These brass fittings have the strength to handle high-pressure applications.
Use these fittings in low-pressure flow applications. They have good corrosion resistance.
Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.
Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part.
With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation.
Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.
Drill holes close together. These bushings have a thinner wall than typical bushings to fit side by side in a fixture plate.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
These bushings are made of stainless steel, which provides excellent corrosion resistance.
Made of durable tungsten carbide, these bushings outlast steel.
Designed to grip slippery plastic, the knurls on these bushings keep them from spinning while you drill. Their hold is stronger than serrated bushings, so they can withstand more force.
Serrations line the sides of these bushings to keep them from spinning while you drill. Also known as jig bushings, they’re pressed or molded into plastic tooling to guide drill bits, counterbores, and reamers.
Serrations on these bushings dig into wood, aluminum, and other soft metals to keep them from spinning while you drill. Also known as jig bushings, they fit inside fixture plates to guide drill bits, counterbores, and reamers.
Eject parts smoothly from your mold. These bushings reduce friction between your ejector pins and plates, so they slide easily and wear out slowly.
Guide pins, punches, and other components in molds and stamping dies—these bushings help you align the upper and lower halves of your setup.
Graphite plugs in these bushings help pins, punches, and other components slide through molds and dies without the mess of grease or oil.
Eject parts smoothly from your mold without liquid lubricant—these bushings reduce friction between ejector pins and plates.
Join different sizes of conduit.
Connect different sizes of conduit.