Press on the top of the handle grip and it rotates out for use. Often used on hatches and pocket doors, these handles fit into a cutout, so they are flush with the mounting surface. Fasten them directly to the front of the surface.

Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

Thread screws through holes from the back of your surface into the handles to install. These handles fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

With a flat inset grip, the handle on these latches is recessed so you won’t bump them or catch clothes on them.

To prevent snags and accidental bumps, these locks have a recessed grip instead of a standard handle. They keep doors shut when you push them closed.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

A catch grabs and holds the strike plate, so doors stay shut when you push them closed.

To keep someone from getting locked inside an enclosure, these locks have an interior release knob that glows green in the dark. Quickly push the locks closed to secure doors.

Fold the ring handle into the recess to stay out of the way when not in use.

With a flat inset grip, the handle is recessed to stay out of the way.

With a molded inset grip, the handle remains recessed to stay out of the way.

When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down into the recess to create compression and minimize rattling from vibration. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Use these latches alone for single-point latching, or add latch kits for more holding power.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.