McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    52 Products

    Garden Hose Wash Guns with Solution Bottle

    Image of Product. Front orientation. Garden Hose Nozzles. Garden Hose Wash Guns with Solution Bottle, Foam Gun.

    Foam Gun

    Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose. Use the attachment to adjust the spray pattern from mist to solid stream.
    Foam Gun—Foam gun creates thick foam. Gun mixes up to 12 oz. of foaming chemicals per gallon of water.
    Pressure,
    psi
    Bottle
    Inlet
    Gun
    Type
    Max. Flow
    Rate, gpm
    Min.
    Max.
    Max. Temp.,
    ° F
    Mixing Head
    Material
    Cap., fl.
    oz.
    Material
    Connection
    Adjustability
    Hose
    Size
    Thread
    Type
    Gender
    Features
    Each
    Foam1.54060100Brass32PlasticFixed3/4GHT
    		FemaleInsulated Body3239K12000000

    Gap-Filling Spray Foam Insulation

    Seal and insulate cracks, gaps, and other hollow spaces with this insulation.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Gap-Filling Spray Foam Insulation, Nonreusable.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    1.2 cu. ft. Approximate Coverage—Insulation that covers 1.2 cu. ft. is best for touch-up and repair jobs.
    12 cu. ft. Approximate Coverage—Insulation that covers 12 cu. ft. comes out in a smooth line, so they're useful for filling and sealing gaps to prevent airflow.
    12.3 cu. ft. Approximate Coverage—Insulation that covers 12.3 cu. ft. sprays farther and more thoroughly than other foam insulation. Use them to fill cavities, channels, framing, and hollow tubing.
    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    Each
    Each
    For Walls and Ceilings
    4Can1.2510.16 BTU/hr @ 75° F2.11Beige-200 to 240Two Cans of Foam with Two Cone Spray Nozzles—9325K64000000———0———0
    16Cylinder12.35240.2 BTU/hr @ 75° F1.3Beige-200 to 240One Cylinder with Two Trigger-Style WandsASTM E84 5/20 for Flame and Smoke
    		9325K11000000———0———0
    30Cylinder122240.16 BTU/hr @ 75° F2.5Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Ten Cone Spray NozzlesASTM E84 0/45 for Flame and Smoke
    		4342N110000008551K140000007738A34000000
     
    Reusable
    Image of Product. Front orientation. Spray Foam Insulation. Gap-Filling Spray Foam Insulation, Reusable.
    5 cu. ft. Approximate Coverage and 9.6 cu. ft. Approximate Coverage—Insulation that covers 5 or 9.6 cu. ft is good for applications that require firmness, such as roofing and where there’s foot traffic. It comes out smooth, so you won’t need to add extra layers or smooth it yourself. The included snap-tip nozzles spray in either a fan or cone pattern.
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Each
    For Walls and Ceilings
    15Cylinder5510.16 BTU/hr @ 75° F3.1Beige-200 to 200Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles9325K580000000
    30Cylinder9.6510.16 BTU/hr @ 75° F3.1Beige-200 to 200Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles9325K59000000
     
    Replacement Nozzles
    Each
    Snap-Tip Replacement Nozzles9325K44100000

    Aerosol Can Triggers

    Image of Product. Front orientation. Aerosol Can Triggers.
    For accurate paint control without finger fatigue, snap these reusable triggers onto your aerosol cans.
    Material
    Each
    Plastic7699T1100000

    Air-Powered Tube Cleaners

    Image of ProductInUse. Front orientation. Tube Cleaners. Air-Powered Tube Cleaners.
    Launch foam cylinders through hose and tubing to power away dirt and deposits. Unlike cleaners with brushes, these work on flexible, curved, and coiled tubing as well as those with fittings, valves, and 90° bends. Connect the gun to your compressed air with the included quick-disconnect fitting. Attach a nozzle and load a cylinder that matches your tube ID, and then insert the nozzle into your tube and pull the trigger. To thoroughly clean the tubing, you may have to use a second cylinder. Cylinders are single use.
    Gun and Nozzle Kits
    Image of Product. Front orientation. Tube Cleaners. Air-Powered Tube Cleaners, Gun and Nozzle Kits.
    Gun and nozzle kits include a gun and nine nozzles for the following tube IDs: 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", and 2". The cylinders are not included.
    Air Inlet
    For Tube ID
    Coupling
    Size
    Gender
    Connection
    Min. Pressure,
    psi
    Max. Pressure,
    psi
    No. of
    Nozzles
    Material
    Includes
    Each
    For Connections without Fittings
    1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2"1/2MaleQuick Disconnect901209Aluminum
    		1/2" Barbed Air Inlet Adapter, Hose Clamp3448N13000000000
     
    Guns
    Image of Product. Front orientation. Tube Cleaners. Air-Powered Tube Cleaners, Guns.
    Air Inlet
    Coupling
    Size
    Gender
    Connection
    Min. Pressure,
    psi
    Max. Pressure,
    psi
    Material
    Each
    1/2MaleQuick Disconnect90120Aluminum
    		3448N10000000
     
    Cylinders
    Image of Product. Front orientation. Tube Cleaners. Air-Powered Tube Cleaners, Cylinders.
    Each
    Package
    For Tube
    ID
    Material
    Each
    Pkg.
    Qty.
    Pkg.
    1/4"Polyurethane Foam3448N15000001003448N16000000
    3/8"Polyurethane Foam3448N1700001003448N1800000
    1/2"Polyurethane Foam3448N1900001003448N200000
    5/8"Polyurethane Foam3448N2100001003448N2200000
    3/4"Polyurethane Foam3448N230000503448N2400000
    1"Polyurethane Foam3448N250000503448N2600000
    1 1/4"Polyurethane Foam3448N270000503448N2800000
    1 1/2"Polyurethane Foam3448N290000253448N300000
    2"Polyurethane Foam3448N310000253448N3200000
     

    Spray Foam Insulation

    Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.
    Dispensing guns (sold separately) are required for the 24oz. cans of black foam insulation.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Spray Foam Insulation.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    @ Thk.
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Specs. Met
    Each
    Each
    Each
    For Walls and Ceilings
    12Can16 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.1Black-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		—8551K1200000———0———0
    12Can16 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		—8551K1100000———0———0
    24Can32 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		—8551K3100000———0———0
    24Can36 ft² @ 1/2"1240.2 BTU/hr @ 72° F1Black-200 to 240—ASTM E84 25/50 for Flame and Smoke
    		—8551K13000008551K140000007738A34000000
     
    For Windows and Doors
    24Can32 ft² @ 1/2"1240.2 BTU/hr @ 72° F1.2Beige-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		AAMA 812-048551K7500000———0———0
     

    Backpack Battery-Powered Foamers

    For large cleaning jobs, these backpack foamers stay pressurized with a rechargeable battery, so you don't have to stop to pump or plug them in. They aerate cleaners and create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid might drip. They can also be used as sprayers. Swap out the included nozzles to switch between patterns ranging from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material.
    All the components—from the stainless steel wand to the Viton® fluoroelastomer seal—stand up to a variety of solvents and acids.
    Cone/Flat/Foam/Mist/Stream Dispensing
    Image of Product. Front orientation. Sprayers. Backpack Battery-Powered Foamers.
    Polyethylene Tank—The polyethylene tank is lightweight and resists impact.
    90 psi Maximum Operating Pressure—Foamers with 2-90 psi operating pressure let you change their pressure based on the job. Use less pressure on delicate surfaces and more pressure for aggressive cleaning.
    Continuous Spray—These foamers also have a trigger that can be locked for continuous spray.
    Filter—A built-in filter helps prevent grass and debris from creating clogs.
    Foamers
    Replacement
    Spray Wands
    Replacement
    Batteries
    Replacement
    Chargers
    Operating
    Pressure, psi
    Flow
    Rate, gpm
    Min.
    Max.
    Min.
    Max.
    Cap.,
    gal.
    Wd.
    Dp.
    Ht.
    Color
    Hose
    Lg.
    Wand
    Lg.
    Fill Opening
    Dia.
    Graduations
    Batteries
    Included
    Battery Charger
    Included
    Features
    Includes
    Each
    Each
    Each
    Each
    Polyethylene Tank
     
    Viton® Fluoroelastomer Seal
    —40—0.3414 1/4"8 1/2"22 1/4"Semi-Clear White50"21"4 1/4"1 gal.YesYesAdjustable Nozzle, Continuous Spray, Filter, Wand HolderOne Brass Nozzle, Five Polypropylene Nozzles9837N1200000009837N160000009837N130000009837N14000000
    2900.10.6415 1/4"9 3/4"22"Semi-Clear Yellow50"21"4 3/4"1 gal.
    1 L    		YesYesAdjustable Nozzle, Continuous Spray, Filter, Wand HolderOne Brass Nozzle, Five Polypropylene Nozzles9837N110000009837N150000029835A400000029835A113000000
     

    Fireblock Spray Foam Insulation

    Often used around electrical outlets and plumbing openings, this foam insulation helps prevent flames and smoke from spreading between walls and floors. It’s orange so inspectors will easily recognize it as fireblock. Rated UL 2818, also known as GREENGUARD Certified, it’s been tested to meet strict limits on VOC (volatile organic compound) emissions.
    Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
    Dispensing guns (sold separately) are required for the 24 oz. can of insulation.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Fireblock Spray Foam Insulation.
    Image of Product. Front orientation. Spray Foam Insulation Guns.

    Dispensing Guns

    Spray Foam Insulation
    Dispensing Guns
    Cleaners for
    Dispensing Guns
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    @ Thk.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Specs.
    Met
    Each
    Each
    Each
    For Walls and Ceilings
    12Can16 ft² @ 1/2"5240.2 BTU/hr @ 72° F1.1Orange-200 to 240One Dispensing TubeASTM E84 25/50 for Flame and Smoke
    		UL 28184341N11000000———0———0
    24Can36 ft² @ 1/2"5240.2 BTU/hr @ 72° F1Orange-200 to 240—ASTM E84 25/50 for Flame and Smoke
    		UL 28184341N12000008551K140000007738A34000000
     

    Quick-Cure Spray Foam Insulation

    Expanding quickly to fill large voids, this foam insulation begins to harden in 3 minutes so you can cut, sand, and finish your surface.
    Nonreusable
    Image of Product. Front orientation. Spray Foam Insulation. Quick-Cure Spray Foam Insulation.
    Container
    Net Wt.,
    oz.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Heat Flow
    Rate @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    For Walls and Ceilings
    13Can0.33Not Rated1.9Blue-40 to 175Two Dispensing TubesASTM E84 25/210 for Flame and Smoke
    		54315K51000000
     

    Small-Capacity Hand-Pump Foamers

    Image of Product. Front orientation. Sprayers. Small-Capacity Hand-Pump Foamers.
    Small enough to spray with one hand, these foamers aerate cleaners to create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid cleaners might drip. They can also be used as sprayers. Swap out the included nozzles as needed—go from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material.
    Polyethylene Tank—The polyethylene tank is lightweight and resists impact and chemicals.
    Viton® Fluoroelastomer Seal—The Viton® fluoroelastomer seal resists chemicals too, so you can use these foamers with a variety of solvents and acids.
    Cap., fl.
    oz.
    Dia.
    Ht.
    Tank
    Material
    Seal Material
    Nozzle Material
    Color
    Fill Opening
    Dia.
    Graduations
    Features
    Includes
    Each
    Cone/Foam/Mist/Stream Dispensing
    485"12"PolyethyleneViton® Fluoroelastomer
    		Brass, Ceramic, PolypropyleneSemi-Clear White2"8 oz.
    250 ml    		Pressure-Relief ValveBrass Adjustable Nozzle, Ceramic Fine Misting Nozzle, Polypropylene Foaming Nozzle9738N11000000
     

    Hand-Pump Foamers

    Image of Product. Front orientation. Sprayers. Hand-Pump Foamers.
    The nozzle on this foamer injects air to make cleaners and disinfectants foam. It can also be used as a sprayer.
    Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that the tank, seal, wand, and nozzle are suitable for your application.
    Continuous Spray—The trigger locks for continuous spraying.
    Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
    Foamers
    Repair Kits
    Replacement
    Trigger and Wand Kits
    Cap.,
    gal.
    Dia.
    Ht.
    Tank
    Material
    Seal Material
    Wand Material
    Nozzle
    Material
    Color
    Hose
    Lg.
    Wand
    Lg.
    Fill Opening
    Dia.
    Graduations
    Features
    Includes
    Each
    Each
    Each
    Cone/Flat/Foam/Stream Dispensing
    29"20 1/2"PolyethyleneViton® Fluoroelastomer
    		Stainless Steel
    		Polypropylene
    		Semi-Clear White50"21"2"1/2 gal.
    2 L    		Continuous Spray, Pressure-Relief Valve, Wand HolderFour Spray Nozzles, One Foam Nozzle, Shoulder Strap1356N110000001356N220000001356N21000000
     

    Flame-Retardant Gap-Filling Spray Foam Insulation

    This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance. The included snap-tip nozzles spray in either a fan or cone pattern.
    Reusable
    Image of Product. Front orientation. Spray Foam Insulation. Flame-Retardant Gap-Filling Spray Foam Insulation.
    Container
    Net Wt.,
    lb.
    Type
    Approx. Coverage
    Volume, cu. ft.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Heat Flow Rate
    @ Temp.
    Density,
    lb/ft³
    Color
    Temp. Range,
    ° F
    Includes
    Flammability Rating
    Each
    For Walls and Ceilings
    15Cylinder9.7510.154 BTU/hr @ 75° F1.75Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Eight Snap-Tip NozzlesASTM E84 10/350 for Flame and Smoke
    		9325K7220000000
    30Cylinder17510.154 BTU/hr @ 75° F1.75Beige-200 to 240Two Cylinders with a Trigger-Style Gun and Eight Snap-Tip NozzlesASTM E84 10/350 for Flame and Smoke
    		9325K721000000
     
    Replacement Nozzles
    Each
    Snap-Tip Replacement Nozzles9325K44100000
    back to top