We will reply to your message within an hour.
More
These Buna-N O-rings are made of FDA-listed material for use with food and beverage.
These Buna-N O-rings are made and bagged in an ISO Class 7 (Fed. Std. 10,000) clean room.
If these O-rings deteriorate, they can be picked up by metal detection systems.
Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications.
These are the highest purity chemical-resistant O-rings we offer. They are made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room, plus they’re USP VI certified; not for use in medical applications.
Made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room.
The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.
Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid.
These temperature- and chemical-resistant O-rings prevent leaks in tube fittings that have a straight-thread connection, also known as O-ring boss fittings.
Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.
These silicone O-rings withstand temperatures up to 400° F or 450° F.
Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.
Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.
Made of FDA-listed material for use with food and beverage.
Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.
This cord stock is made of FDA-listed material for use with food and beverage. It resists citric acid, diluted salt solutions, glycerin, and sodium bicarbonate.
Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.
Rated for pressure up to 10,000 psi, these leather U-cups handle over 80 times more pressure than our Buna-N U-cups.
Avoid common O-ring failure in dynamic applications—the square base of these seals prevents twisting, while backup rings protect against extrusion.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.
These seals have a beveled lip that optimizes contact against the rod, while a secondary lip keeps the seal stable.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our buffering seals.
These wipers seal against the cylinder housing to prevent contaminants from entering between the outside edge and the housing.
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
Replace wipers in open-groove cylinders—these wipers have an integral steel case so they press fit into the groove around the rod.
Fill irregularities in valve stem with these soft PTFE seals.
Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.
These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.
Multiple internal springs ensure these seals keep the sealing surfaces in contact in demanding applications, such as agricultural, chemical, and mining pumps.
Made of durable material, these washers resist wear from rubbing and scraping surfaces.
Sunlight, ozone, and water won’t affect these washers.
These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.
Made of polyurethane, these belts resist chemicals and abrasion.