McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    57 Products

    Remote-Reading Tension Force Gauges

    Image of ProductInUse. Front orientation. Force Gauges. Remote-Reading Tension Force Gauges.
    Image of Product. Front orientation. Force Gauges. Remote-Reading Tension Force Gauges.
    Image of Specification. Receiver Display. Front orientation. ZoomedIn view. Contains Border. Remote-Reading Tension Force Gauges.

    Receiver

    Display

    Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists. These gauges are also called dynamometers and crane scales. Made of steel, they’re durable enough to briefly hold heavy loads up to 500% of their capacity. But, they will no longer take measurements if the load exceeds 200%. Warning lights will flash first when your load exceeds capacity, then again when it reaches 133% capacity. To prevent overloads, the peak-hold setting displays the highest measurement. The tare function lets you reset the gauge to zero after attaching a container to weigh only the material inside. These gauges include a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They also meet IEC and ASME safety and fatigue standards.
    Because their indicators and load cells are IP rated, these gauges stand up to washdowns and brief submersion common to food and chemical plants. They’re also safe to use outdoors since they’re NEMA rated to seal out weather.
    These gauges come with two shackles that work with other lifting fittings, such as clevis hooks. The included batteries power their load cells for up to 2,000 hours.
    Shackle
    Temp.
    Range, ° F
    Cap.
    Accuracy
    Measuring
    Increments
    Ht.
    Wd.
    Dp.
    Opening
    Ht.
    Opening
    Wd.
    Material
    Container
    Type
    Includes
    Specs. Met
    Display
    Type
    Digital Display
    Type
    Features
    Enclosure Rating
    Load
    Point
    Remote
    Receiver
    Each
    Gauges
    2,000 lb.
    900 kg
    8,800 N    		±2 lb.
    ±1 kg
    ±9 N    		1 lb.
    0.5 kg
    5 N    		4 7/8"4"3 1/4"1 3/8"1"SteelPlastic CaseCalibration InstructionsASME BTH-1, IEC 61508DigitalLCDPeak-Hold Setting
    Tare Function
    Two-Level Warning Lights    		IP65
    IP67
    NEMA 4
    		-15 to 1750 to 1557113N11000000000
    4,000 lb.
    1,800 kg
    17,700 N    		±4 lb.
    ±2 kg
    ±18 N    		2 lb.
    1 kg
    9 N    		4 7/8"4"3 1/4"1 3/8"1"SteelPlastic CaseCalibration InstructionsASME BTH-1, IEC 61508DigitalLCDPeak-Hold Setting
    Tare Function
    Two-Level Warning Lights    		IP65
    IP67
    NEMA 4
    		-15 to 1750 to 1557113N1200000000
    10,000 lb.
    4,500 kg
    44,400 N    		±10 lb.
    ±5 kg
    ±45 N    		5 lb.
    2 kg
    23 N    		5 3/8"4"3 1/4"2 3/8"1 3/4"SteelPlastic CaseCalibration InstructionsASME BTH-1, IEC 61508DigitalLCDPeak-Hold Setting
    Tare Function
    Two-Level Warning Lights    		IP65
    IP67
    NEMA 4
    		-15 to 1750 to 1557113N1300000000
    20,000 lb.
    9,000 kg
    88,900 N    		±20 lb.
    ±9 kg
    ±89 N    		10 lb.
    5 kg
    45 N    		7 3/4"4"4 5/8"3 3/4"2 5/8"SteelPlastic CaseCalibration InstructionsASME BTH-1, IEC 61508DigitalLCDPeak-Hold Setting
    Tare Function
    Two-Level Warning Lights    		IP65
    IP67
    NEMA 4
    		-15 to 1750 to 1557113N1400000000
    50,000 lb.
    22,600 kg
    222,400 N    		±50 lb.
    ±23 kg
    ±222 N    		10 lb.
    5 kg
    50 N    		9 3/8"4"4 5/8"5 3/4"3 55/64"SteelPlastic CaseCalibration InstructionsASME BTH-1, IEC 61508DigitalLCDPeak-Hold Setting
    Tare Function
    Two-Level Warning Lights    		IP65
    IP67
    NEMA 4
    		-15 to 1750 to 1557113N2100000000
     

    Ready-to-Use Tension and Compression Force Sensors

    Already calibrated, these sensors are ready to use right out of the box. Use them to measure forces in equipment by converting forces into electrical signals. They’re also used as the foundation within custom-built scales and force gauges, and to measure force in crash tests and other quality control processes. These sensors are also known as load cells.
    When choosing a sensor, consider whether you’ll be measuring tension, compression, or both. Select sensors with a capacity rating higher than the greatest load you expect them to receive. They’re designed to briefly handle forces over their load capacity to protect from overload. Choose between a rectangle, round, S-shape, or cylinder sensor to best suit your application.
    For the most accurate measurements, these sensors may need to be recalibrated.
    Rectangle
    Image of Product. With 3 Threaded Through Holes. Front orientation. Contains Annotated. Load Cells. Ready-to-Use Tension and Compression Force Sensors, Rectangle, With 3 Threaded Through Holes.

    With 3 Threaded Through Holes

    Rectangle sensors are also known as single-point or shear beam load cells. They can be used in multiples across surfaces to measure uneven loads. They’re often used in bench-top and floor scales where loads are often unbalanced. They’re also used in packaging, machine bins, conveyors, and chutes.
    IP67 Enclosure Rating— IP67 and IP68 sensors won’t fail if briefly submerged.
    Legal-for-Trade—Legal-for-trade sensors are NTEP approved for use with equipment that measures materials sold by weight.
    Enclosure Rating—IP-rated sensors seal out dust.
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor Material
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    Measures Compression Legal-for-Trade
     
    With 3 Threaded Through Holes
    500 lb.; 225 kg±1.6 oz., ±45 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 3/16"1 3/16"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N690000000
    500 lb.; 225 kg±1.6 oz., ±45 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"Alloy Steel-30 to 145IP67
    		6131N64000000
    1,000 lb.; 450 kg±3.2 oz., ±90 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 3/16"1 3/16"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N71000000
    1,000 lb.; 450 kg±3.2 oz., ±90 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"Alloy Steel-30 to 145IP67
    		6131N65000000
    2,500 lb.; 1,130 kg±8 oz., ±226 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N72000000
    2,500 lb.; 1,130 kg±8 oz., ±226 g0.1 lb., 0.1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"Alloy Steel-30 to 145IP67
    		6131N66000000
    5,000 lb.; 2,265 kg±1 lb., ±453 g1 lb., 1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N73000000
    5,000 lb.; 2,265 kg±1 lb., ±453 g1 lb., 1 kg1/2"-20
    		5 1/8"1 1/4"1 1/4"Alloy Steel-30 to 145IP67
    		6131N67000000
    10,000 lb.; 4,535 kg±2 lb., ±907 g1 lb., 1 kg3/4"-16
    		6 3/4"1 7/16"1 7/16"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N74000000
    10,000 lb.; 4,535 kg±2 lb., ±907 g1 lb., 1 kg3/4"-16
    		6 3/4"1 1/2"1 1/2"Alloy Steel-30 to 145IP67
    		6131N68000000
     
    Load Cell Junction Boxes
    Image of Product. Front orientation. Load Cell Junction Boxes. Ready-to-Use Tension and Compression Force Sensors.
    Junction Boxes bring multiple sensors together to create a single system. They’re often used in platform or hopper scales when multiple sensors need to work together to give a total weight reading.
    Housing
    For No.
    of Sensors
    Lg.
    Wd.
    Ht.
    Material
    Color
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    27 11/16"4 15/16"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N110000000
    47 11/16"7 1/4"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N12000000
    S-Shape
    Image of Product. Front orientation. Contains Annotated. Load Cells. Ready-to-Use Tension and Compression Force Sensors, S-Shape.
    S-shape sensors with threaded through holes monitor and test tension in wires, cords, ropes, and harnesses. They’re often used in hanging scales.
    IP67 Enclosure Rating— IP67 and IP68 sensors won’t fail if briefly submerged.
    Legal-for-Trade—Legal-for-trade sensors are NTEP approved for use with equipment that measures materials sold by weight.
    Enclosure Rating—IP-rated sensors seal out dust.
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor Material
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    Measures Tension and Compression Legal-for-Trade
     
    With 2 Threaded Through Holes
    100 lb.; 45 kg±0.32 oz., ±9 g0.01 lb., 0.001 kg1/4"-28
    		2"7/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N540000000
    100 lb.; 45 kg±0.32 oz., ±9 g0.01 lb., 0.001 kg1/4"-28
    		2"1/2"2 1/2"Alloy Steel-30 to 145IP67
    		6131N44000000
    250 lb.; 113 kg±0.8 oz., ±23 g0.01 lb., 0.01 kg1/4"-28
    		2"7/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N55000000
    250 lb.; 113 kg±0.8 oz., ±23 g0.01 lb., 0.01 kg1/4"-28
    		2"1/2"2 1/2"Alloy Steel-30 to 145IP67
    		6131N45000000
    500 lb.; 225 kg±1.6 oz., ±45 g0.01 lb., 0.01 kg1/2"-20
    		2"11/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N56000000
    500 lb.; 225 kg±1.6 oz., ±45 g0.01 lb., 0.01 kg1/2"-20
    		2"3/4"2 1/2"Alloy Steel-30 to 145IP67
    		6131N46000000
    1,000 lb.; 450 kg±3.2 oz., ±90 g0.1 lb., 0.01 kg1/2"-20
    		2"11/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N57000000
    1,000 lb.; 450 kg±3.2 oz., ±90 g0.1 lb., 0.01 kg1/2"-20
    		2"3/4"2 1/2"Alloy Steel-30 to 145IP67
    		6131N47000000
    2,000 lb.; 905 kg±6.4 oz., ±181 g0.1 lb., 0.1 kg1/2"-20
    		2"15/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N58000000
    2,000 lb.; 905 kg±6.4 oz., ±181 g0.1 lb., 0.1 kg1/2"-20
    		2"1"2 1/2"Alloy Steel-30 to 145IP67
    		6131N48000000
    2,500 lb.; 1,130 kg±8 oz., ±226 g0.1 lb., 0.1 kg1/2"-20
    		2"15/16"2 3/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N59000000
    2,500 lb.; 1,130 kg±8 oz., ±226 g0.1 lb., 0.1 kg1/2"-20
    		2"1"2 1/2"Alloy Steel-30 to 145IP67
    		6131N49000000
    3,000 lb.; 1,360 kg±9.6 oz., ±272 g0.1 lb., 0.1 kg1/2"-20
    		3"15/16"3 7/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N61000000
    3,000 lb.; 1,360 kg±9.6 oz., ±272 g0.1 lb., 0.1 kg1/2"-20
    		3"1"4"Alloy Steel-30 to 145IP67
    		6131N51000000
    5,000 lb.; 2,265 kg±1 lb., ±453 g0.1 lb., 0.1 kg3/4"-16
    		3"15/16"3 7/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N62000000
    5,000 lb.; 2,265 kg±1 lb., ±453 g0.1 lb., 0.1 kg3/4"-16
    		3"1"4"Alloy Steel-30 to 145IP67
    		6131N52000000
    10,000 lb.; 4,535 kg±2 lb., ±907 g1 lb., 0.1 kg3/4"-16
    		2 15/16"1 3/16"3 7/8"17-4 PH Stainless Steel
    		-30 to 145IP67
    		6131N63000000
    10,000 lb.; 4,535 kg±2 lb., ±907 g1 lb., 0.1 kg3/4"-16
    		3"1"4"Alloy Steel-30 to 145IP67
    		6131N53000000
     
    Load Cell Junction Boxes
    Image of Product. Front orientation. Load Cell Junction Boxes. Ready-to-Use Tension and Compression Force Sensors.
    Junction Boxes bring multiple sensors together to create a single system. They’re often used in platform or hopper scales when multiple sensors need to work together to give a total weight reading.
    Housing
    For No.
    of Sensors
    Lg.
    Wd.
    Ht.
    Material
    Color
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    27 11/16"4 15/16"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N110000000
    47 11/16"7 1/4"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N12000000

    Configurable Tension and Compression Force Sensors

    Calibrate these sensors to your desired capacity to measure tension, compression, or both. Also known as load cells, they measure and track the forces of your equipment by converting them into electrical signals. Send these signals to your computer or programmable logic controller (PLC) to monitor, document, and trigger actions in your machinery.
    When choosing a sensor, consider whether you’ll be measuring tension, compression, or both. Select sensors with a capacity rating higher than the greatest load you expect them to receive. They’re designed to briefly handle forces 1.5 times their load capacity to protect from overload. Choose between a rectangle, round, or S-shape sensor to best suit your application.
    For the most accurate measurements, calibrate these sensors to your data acquisition system or display.
    Rectangle
    Image of Product. With 4 Threaded Holes. Front orientation. Contains Annotated. Load Cells. Configurable Tension and Compression Force Sensors, Rectangle, With 4 Threaded Holes.

    With 4 Threaded Holes

    Rectangle sensors are also known as single-point or shear beam load cells. They can be used in multiples across surfaces to measure uneven loads. They’re often used in bench-top and floor scales where loads are often unbalanced. They’re also used in packaging, machine bins, conveyors, and chutes.
    IP67 Enclosure Rating—IP67 sensors won’t fail if briefly submerged.
    Enclosure Rating—IP-rated sensors seal out dust.
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor
    Material
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    Measures Tension and Compression Legal-for-Trade
     
    With 4 Threaded Holes
    22 lb., 10 kg±0.07 oz., ±2 g0.01 lb., 0.001 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 100IP67
    		3487N4180000000
    44 lb., 20 kg±0.14 oz., ±4 g0.01 lb., 0.001 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 100IP67
    		3487N419000000
    110 lb., 50 kg±0.35 oz., ±10 g0.01 lb., 0.01 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 100IP67
    		3487N42000000
    220 lb., 100 kg±0.7 oz., ±20 g0.01 oz., 0.001 g1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 100IP67
    		3487N421000000
     
    Load Cell Junction Boxes
    Image of Product. Front orientation. Load Cell Junction Boxes. Configurable Tension and Compression Force Sensors.
    Connection hubs combine the measurements of multiple tension and compression force sensors together.
    Housing
    For No.
    of Sensors
    Lg.
    Wd.
    Ht.
    Material
    Color
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    27 11/16"4 15/16"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N110000000
    47 11/16"7 1/4"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N12000000
    S-Shape
    Image of Product. Front orientation. Contains Annotated. Load Cells. Configurable Tension and Compression Force Sensors, S-Shape, Threaded Through Hole.

    Threaded Through

    Hole

    S-shaped sensors are a common choice for monitoring and testing tension in wires, cords, ropes, and harnesses. They are often used in hanging scales. Also known as S-beam load cells.
    IP67 Enclosure Rating—IP67 sensors won’t fail if briefly submerged.
    Enclosure Rating—IP-rated sensors seal out dust.
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor
    Material
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    Measures Tension and Compression Legal-for-Trade
     
    With 2 Threaded Through Holes
    25 lb., 11 kg±0.12 oz., ±3.4 g0.01 lb., 0.01 kg1/4"-28
    		2"1/2"2 1/2"Alloy Steel-40 to 175IP67
    		3487N5150000000
    50 lb., 22 kg±0.24 oz., ±6.8 g0.01 lb., 0.01 kg1/4"-28
    		2"1/2"2 1/2"Alloy Steel-40 to 175IP67
    		3487N516000000
     
    Load Cell Junction Boxes
    Image of Product. Front orientation. Load Cell Junction Boxes. Configurable Tension and Compression Force Sensors.
    Connection hubs combine the measurements of multiple tension and compression force sensors together.
    Housing
    For No.
    of Sensors
    Lg.
    Wd.
    Ht.
    Material
    Color
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    27 11/16"4 15/16"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N110000000
    47 11/16"7 1/4"1 1/2"Aluminum
    		Blue-40 to 185IP66
    		6131N12000000

    Ready-to-Use Tension and Compression Force Sensor Kits

    With a sensor that’s already calibrated and everything you need to relay data, these kits come ready to operate. Use them to measure forces in equipment and send the data directly to a computer or programmable logic controller (PLC) to monitor, document, and trigger actions in machinery. They’re also used as the foundation within custom-built scales and force gauges, and to measure force in crash tests and other quality control processes. These sensors are also known as load cells.
    When choosing a sensor, consider whether you’ll be measuring tension, compression, or both. Select sensors with a capacity rating higher than the greatest load you expect them to receive. They’re designed to briefly handle forces 1.5 times their load capacity to protect from overload. Choose between a rectangle, round, or S-shape sensor to best suit your application.
    Rectangle
    Image of System. PC Connection Kit. Front orientation. Contains Annotated. PC Connection Kits. Ready-to-Use Tension and Compression Force Sensor Kits.

    PC Connection Kit

    Image of System. PLC Connection Kit. Front orientation. Contains Annotated. PLC Connection Kits. Ready-to-Use Tension and Compression Force Sensor Kits.

    PLC Connection Kit

    Image of Product. With 4 Threaded Holes. Front orientation. Contains Annotated. Load Cells. Ready-to-Use Tension and Compression Force Sensor Kits, Rectangle, With 4 Threaded Holes.

    With 4 Threaded Holes

    Image of Product. With 8 Threaded Holes. Front orientation. Contains Annotated. Load Cells. Ready-to-Use Tension and Compression Force Sensor Kits, Rectangle, With 8 Threaded Holes.

    With 8 Threaded Holes

    Rectangle sensors are also known as single-point or shear beam load cells. They can be used in multiples across surfaces to measure uneven loads. They’re often used in bench-top and floor scales where loads are often unbalanced. They’re also used in packaging, machine bins, conveyors, and chutes.
    IP67 Enclosure Rating—IP67 rated sensors won’t fail if briefly submerged.
    PC Connection Kits—PC connection kits link to a computer, tablet, or LCD display. All include a calibrated force sensor, a data conversion hub, and data-recording software. The conversion hub turns electrical signals from the sensor into usable force measurements. The software plots and analyzes measurements, so you can track high, low, and average values over time. It can also set off connected alarms or notify you when readings fall outside a set range. Export the data to Microsoft Excel and other analytical software such as MATLAB and LabVIEW. Wired PC connection kits come with a 6-ft. hub-to-PC USB cord.
    PLC Connection Kits—PLC connection kits send an analog signal to your PLC to trigger actions such as diverting items that exceed a certain weight on a conveyor. They include a calibrated sensor and a data conversion hub. They’re not for use with LCD displays.
    Enclosure Rating—IP rated sensors seal out dust.
    PC
    Connection Kits
    PLC
    Connection Kits
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor
    Material
    Temp. Range,
    ° F
    Each
    Each
    Measures Compression and Tension—IP67 Rated (Legal-for-Trade)
     
    With 4 Threaded Holes
    22 lb.; 10 kg±0.07 oz., ±2 g0.01 lb., 1 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 1003487N4300000003487N4420000000
    44 lb.; 20 kg±0.14 oz., ±4 g0.01 lb., 1 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 1003487N4310000003487N443000000
    110 lb.; 50 kg±0.35 oz., ±10 g0.01 lb., 0.01 kg1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 1003487N4320000003487N444000000
    220 lb.; 100 kg±0.7 oz., ±20 g0.01 oz., 1 g1/4"-20
    		5 15/16"1"1 9/16"Aluminum
    		15 to 1003487N4330000003487N445000000
     
    With 8 Threaded Holes
    550 lb.; 250 kg±1.8 oz., ±50 g0.01 lb., 0.01 kg5/16"-18
    		7 3/8"2 1/2"2 7/16"Aluminum
    		15 to 1006384N1500000000———0
    1,100 lb.; 500 kg±3.5 oz., ±100 g0.1 lb., 0.01 kg5/16"-18
    		7 3/8"2 1/2"2 7/16"Aluminum
    		15 to 1006384N1600000000———0
     
    Accessories for Load Cells
    Screens
    Image of Product. Display. Front orientation. Display Screens. Ready-to-Use Tension and Compression Force Sensor Kits.

    Display

    Component
    Display
    Type
    For No.
    of Sensors
    Each
    DisplayDigital13487N4870000000
    DisplayDigital43487N488000000
    Software
    Each
    Data-Recording Software3487N4910000000
    S-Shape
    Image of System. PC Connection Kit. Front orientation. Contains Annotated. PC Connection Kits. Ready-to-Use Tension and Compression Force Sensor Kits.

    PC Connection Kit

    Image of Product. Front orientation. Contains Annotated. Load Cells. Ready-to-Use Tension and Compression Force Sensor Kits, S-Shape.
    S-shape sensors with threaded through holes monitor and test tension in wires, cords, ropes, and harnesses. They’re often used in hanging scales.
    IP67 Enclosure Rating—IP67 rated sensors won’t fail if briefly submerged.
    Threaded Through Hole—Sensors with a threaded through hole are also known as pancake load cells. They can be bolted to surfaces in any orientation and are commonly used to measure clamping forces
    PC Connection Kits—PC connection kits link to a computer, tablet, or LCD display. All include a calibrated force sensor, a data conversion hub, and data-recording software. The conversion hub turns electrical signals from the sensor into usable force measurements. The software plots and analyzes measurements, so you can track high, low, and average values over time. It can also set off connected alarms or notify you when readings fall outside a set range. Export the data to Microsoft Excel and other analytical software such as MATLAB and LabVIEW. Wired PC connection kits come with a 6-ft. hub-to-PC USB cord.
    Enclosure Rating—IP rated sensors seal out dust.
    PC
    Connection Kits
    Wt. Cap.
    Accuracy
    Wt. Measuring
    Increments
    Thread
    Size
    Lg.
    Wd.
    Ht.
    Sensor
    Material
    Temp. Range,
    ° F
    Each
    Measures Compression and Tension—IP67 Rated (Legal-for-Trade)
     
    With 2 Threaded Through Holes
    1,000 lb.; 450 kg±4.8 oz., ±135 g0.1 lb., 0.01 kg1/2"-20
    		2"3/4"2 1/2"Alloy Steel-40 to 1756384N21000000000
    2,500 lb.; 1,130 kg±12 oz., ±338 g0.1 lb., 0.1 kg3/4"-16
    		3"1"4"Alloy Steel-40 to 1756384N2300000000
    5,000 lb.; 2,265 kg±1.5 lb., ±680 g1 lb., 0.1 kg1/2"-20
    		2"1"2 1/2"Alloy Steel-40 to 1756384N2200000000
     
    Accessories for Load Cells
    Screens
    Image of Product. Display. Front orientation. Display Screens. Ready-to-Use Tension and Compression Force Sensor Kits.

    Display

    Component
    Display
    Type
    For No.
    of Sensors
    Each
    DisplayDigital13487N4870000000
    DisplayDigital43487N488000000
    Software
    Each
    Data-Recording Software3487N4910000000
    back to top