We will reply to your message within an hour.
Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.
Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.
Housing is brass.
Housing is plastic.
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Apply your load directly to the top of these gauges to measure compression force.
Measure tension force as well as weight.
Press the side of the gauge tip against an object to record the amount of tension required to move it.
The large dial makes these gauges easy to read. They measure tension force as well as weight.
Measure the tension of wire and filament without pausing your operation.
Use the included Windows-compatible software to upload measurement data.
Measure tension force as well as weight. Also known as dynamometers.
Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.
Hold fine wire and filament.
Grip paper, film, and thin plastic.
A chuck-style grip with a round opening gets a secure hold on pins.
Good for gripping most shapes and materials.
Finger-tighten the three-jaw chuck onto the tool to be measured, then twist either the gauge or tool to test.
Place your tool and the included square drive connector on the tester and turn.
Measure the torque output of torque wrenches, screwdrivers, and other hand tools to ensure they deliver the right amount of torque—and check your results on a digital screen.
Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.
Calibrate torque-limiting power tools such as air-powered and impact drivers.
Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening.
These testers have a digital display and are accurate to ±1%.
Use these gauges with changeable sensors and square-drive sockets to display, collect, and download torque readings.
Glue these gauges onto a structure to measure strain in a single direction.
Ensure proper blade tension.
Measure belt tension up to 2,200 lbs.
Keep an eye on belt tension to minimize vibration, noise, and slippage.