Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.

Style B dispensers have an additional bracket assembly that grips the drum from the top and bottom.

Optional drum adapters fit inside the saddle to hold 30-gallon drums.

Optional tilt brakes prevent the drum from tilting when not in use.

Warning: Never use to lift people or items over people.

Lift, transport, and place drums without a forklift. A V-style base makes it easy to load and unload drums from pallets and platforms. Swivel casters at the back of the truck make them easy to steer.

Trucks with a gas-spring pump handle have a U-shaped lever that engages the gas spring and ratchet mechanism to lift, hold, and release the drum. The length of the handle provides proper leverage, and the base has built-in counterbalance for stability. Hooks securely hold the drum below the rim.

Trucks with a hydraulic pump handle control lifting and lowering of the drum while a claw-style grabber attaches to the rim of the drum for a secure hold.

Trucks with a hydraulic foot pump have a pedal to control lifting and lowering of the drum while a spring-loaded clamp securely grips the rim of the drum. The legs are retractable for easier maneuvering in tight spaces.

Floor locks and wheel brakes keep trucks stationary during lifting and lowering.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces.

With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with chain and ratchet-style tightener secures the drum and a floor lock keeps the handlers stationary.

Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.

Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height. Release the button to stop lifting. The load will not drop in the event of a power failure.

Handlers with a crank handle are best for dispensing at lower heights. Handlers with a chain hand wheel are easier to use at higher dispensing heights.

Optional drum adapters fit inside the saddle to hold 30-gallon drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.