About Battery Disposal
More
Large-Cell Batteries for Starting
 |  Post |  Tab Post |  Threaded Stud |  Post and Side Socket |
 Terminal Location A |  Terminal Location C |  Terminal Location E |  Terminal Location D |
Deliver a surge of power to start automobiles and other vehicles. These wet-cell batteries contain electrolyte in an unsealed container, so they must be mounted upright. They may occasionally need to be filled with distilled water.
Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
Voltage | Battery Size | Terminal Location | Cold Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Post | |||||||||
| 6V DC | 1 | A | 625 | __ | 8.6" | 8.8" | 6.8" | 0000000 | 0000000 |
| 12V DC | 24 | C | 585 | __ | 9.1" | 10.6" | 6.8" | 0000000 | 000000 |
| 12V DC | 8D | E | 1,300 | __ | 10" | 20.8" | 11" | 0000000 | 000000 |
Tab Post | |||||||||
| 12V DC | U1 | C | 300 | __ | 7.3" | 7.8" | 5.2" | 0000000 | 00000 |
Threaded Stud | |||||||||
| 12V DC | 31 | D | 925 | 5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal) | 9.4" | 13" | 6.8" | 0000000 | 000000 |
Post and Side Socket | |||||||||
| 12V DC | 34/78 | D | 800 | __ | 8.1" | 10.2" | 6.9" | 0000000 | 000000 |
| 12V DC | 75DT | D | 630 | __ | 8.1" | 9.4" | 6.9" | 0000000 | 000000 |
Large-Cell Batteries for Continuous Use
For use in floor-cleaning machines, lift trucks, personnel carriers, and other vehicles that require power over an extended time, these deep-cycle batteries can handle many charge/deep-discharge cycles. They are wet cell, so they contain electrolyte in an unsealed container and must be mounted upright. They may occasionally need to be filled with distilled water.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Manufacturer Equivalent Number | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Offset Threaded Stud | ||||||||||||
| 6V DC | GC2 | __ | A | 215 | 395 | __ | 5/16"-18 | 10.88" | 10.25" | 7.13" | 00000000 | 0000000 |
Threaded Stud Inside Post | ||||||||||||
| 12V DC | 31 | 31M | D | 115 | 205 | 900 | 5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal) | 9.4" | 13" | 6.8" | 00000000 | 000000 |
Large-Cell Batteries for Starting and Continuous Use
These dual-purpose batteries provide a surge of power to start automobiles and other vehicles, and they deliver power over a long period of time. They're deep cycle, so they can handle many charge/deep discharge cycles. Because they are wet-cell batteries and contain electrolyte in an unsealed container, they must be mounted upright. They may occasionally need to be filled with distilled water.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
Sealed Large-Cell Batteries for Continuous Use
Provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.
Warning: Batteries should always be charged and discharged in a ventilated area.
Quick-Disconnect Tab Size | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Voltage | Terminal Location | 20-hr. Rate Capacity, amp-hrs. | 20-hr. Discharge Rate, mA | Positive | Negative | Thread Size | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | |||||||||||
Quick-Disconnect Tab | |||||||||||
| 4V DC | C | 4.5 | 225 | 0.25" | 0.25" | __ | 3.7" | 1.9" | 2.1" | 0000000 | 000000 |
| 4V DC | C | 10 | 500 | 0.187" | 0.187" | __ | 3.7" | 4" | 2" | 0000000 | 00000 |
| 6V DC | A | 9 | 450 | 0.187" | 0.187" | __ | 4.7" | 3.9" | 2.2" | 0000000 | 00000 |
| 6V DC | C | 1.2 | 60 | 0.187" | 0.187" | __ | 2.2" | 3.8" | 1" | 0000000 | 00000 |
| 6V DC | C | 1.2 | 70 | 0.187" | 0.187" | __ | 2" | 3.8" | 0.9" | 0000000 | 00000 |
| 6V DC | C | 3.5 | 175 | 0.187" | 0.187" | __ | 2.4" | 5.3" | 1.3" | 0000000 | 00000 |
| 6V DC | C | 7 | 350 | 0.187" | 0.187" | __ | 3.7" | 6" | 1.3" | 0000000 | 00000 |
| 6V DC | C | 12 | 600 | 0.187" | 0.187" | __ | 3.7" | 6" | 2" | 0000000 | 00000 |
| 6V DC | F | 13 | 650 | 0.25" | 0.187" | __ | 5.6" | 4.3" | 2.8" | 0000000 | 00000 |
| 6V DC | G | 5 | 250 | 0.187" | 0.187" | __ | 3.9" | 2.6" | 2.6" | 0000000 | 00000 |
| 6V DC | H | 1 | 55 | 0.187" | 0.187" | __ | 2" | 2" | 1.7" | 0000000 | 00000 |
| 6V DC | H | 4.5 | 225 | 0.187" | 0.187" | __ | 3.9" | 2.8" | 1.9" | 0000000 | 00000 |
| 6V DC | J | 36 | 1,800 | 0.25" | 0.25" | __ | 6.5" | 6.3" | 3.4" | 0000000 | 00000 |
| 8V DC | E | 3.2 | 160 | 0.187" | 0.187" | __ | 2.5" | 5.3" | 1.4" | 0000000 | 00000 |
| 12V DC | B | 26 | 1,300 | 0.25" | 0.25" | __ | 4.9" | 6.6" | 7" | 0000000 | 000000 |
| 12V DC | C | 2.5 | 125 | 0.187" | 0.187" | __ | 2.4" | 7" | 1.4" | 0000000 | 00000 |
| 12V DC | C | 2.9 | 145 | 0.187" | 0.187" | __ | 2.4" | 7" | 1.4" | 0000000 | 00000 |
| 12V DC | C | 5 | 250 | 0.187" | 0.187" | __ | 4" | 3.5" | 2.8" | 0000000 | 00000 |
| 12V DC | C | 5 | 250 | 0.25" | 0.25" | __ | 4" | 3.5" | 2.8" | 0000000 | 00000 |
| 12V DC | C | 6 | 300 | 0.25" | 0.25" | __ | 4" | 3.5" | 2.8" | 0000000 | 00000 |
| 12V DC | E | 1.4 | 70 | 0.187" | 0.187" | __ | 2" | 3.8" | 1.7" | 0000000 | 00000 |
| 12V DC | E | 3.4 | 170 | 0.187" | 0.187" | __ | 2.4" | 5.2" | 2.6" | 0000000 | 00000 |
| 12V DC | E | 12 | 600 | 0.187" | 0.187" | __ | 3.7" | 6" | 4" | 0000000 | 00000 |
| 12V DC | E | 12 | 600 | 0.25" | 0.25" | __ | 3.7" | 6" | 4" | 0000000 | 00000 |
| 12V DC | K | 7 | 350 | 0.187" | 0.187" | __ | 3.7" | 6" | 2.6" | 0000000 | 00000 |
| 12V DC | K | 7 | 350 | 0.25" | 0.25" | __ | 3.7" | 6" | 2.6" | 0000000 | 00000 |
| 12V DC | K | 7.5 | 390 | 0.25" | 0.25" | __ | 3.9" | 6" | 2.6" | 0000000 | 00000 |
| 12V DC | K | 8.5 | 425 | 0.25" | 0.25" | __ | 3.7" | 5.9" | 2.6" | 0000000 | 00000 |
| 12V DC | K | 9 | 450 | 0.25" | 0.25" | __ | 3.7" | 6" | 2.6" | 0000000 | 00000 |
| 12V DC | K | 12 | 600 | 0.25" | 0.25" | __ | 3.7" | 6" | 3.9" | 0000000 | 00000 |
| 12V DC | K | 14 | 700 | 0.25" | 0.25" | __ | 3.7" | 6" | 3.9" | 0000000 | 00000 |
Spring Terminal | |||||||||||
| 6V DC | G | 5 | 250 | __ | __ | __ | 3.9" | 2.6" | 2.6" | 0000000 | 00000 |
Tab | |||||||||||
| 6V DC | C | 20 | 1,000 | __ | __ | __ | 4.9" | 6.2" | 3.3" | 0000000 | 00000 |
| 12V DC | B | 18 | 900 | __ | __ | __ | 6.57" | 7.13" | 2.99" | 0000000 | 00000 |
| 12V DC | B | 18 | 900 | __ | __ | __ | 6.6" | 7.1" | 3" | 0000000 | 00000 |
| 12V DC | B | 40 | 2,000 | __ | __ | __ | 6.7" | 7.8" | 6.5" | 0000000 | 000000 |
| 12V DC | C | 28 | 1,400 | __ | __ | __ | 7" | 6.5" | 4.9" | 0000000 | 000000 |
Tab Post | |||||||||||
| 12V DC | C | 35 | 1,750 | __ | __ | __ | 6.2" | 7.7" | 5.1" | 0000000 | 000000 |
| 12V DC | C | 55 | 2,750 | __ | __ | __ | 8.2" | 9" | 5.5" | 0000000 | 000000 |
| 12V DC | C | 78.6 | 3,750 | __ | __ | __ | 8.2" | 10.3" | 6.6" | 0000000 | 000000 |
| 12V DC | C | 100 | 5,000 | __ | __ | __ | 8.2" | 12" | 6.6" | 0000000 | 000000 |
Threaded Insert | |||||||||||
| 12V DC | C | 107 | 5,500 | __ | __ | M8 | 8.4" | 13" | 6.7" | 0000000 | 000000 |
Dry-Cell AGM Lead Calcium | |||||||||||
Quick-Disconnect Tab | |||||||||||
| 6V DC | C | 8 | 350 | 0.25" | 0.187" | __ | 3.7" | 6" | 1.4" | 0000000 | 00000 |
Long-Life Sealed Large-Cell Batteries for Continuous Use
 | Quick-Disconnect Tab | Tab | Threaded Insert |
Terminal Location C | Terminal Location K | Terminal Location B |
Replace batteries less often—these batteries last at least twice as long as standard sealed large-cell batteries. Use them to provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.
Warning: Batteries should always be charged and discharged in a ventilated area.
Quick-Disconnect Tab Size | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Voltage | Terminal Location | 20-hr. Rate Capacity, amp-hrs. | 20-hr. Discharge Rate, mA | Positive | Negative | Thread Size | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | |||||||||||
Quick-Disconnect Tab | |||||||||||
| 6V DC | C | 7 | 360 | 0.187" | 0.187" | __ | 3.9" | 6" | 1.3" | 000000 | 000000 |
| 6V DC | C | 10 | 600 | 0.187" | 0.187" | __ | 4" | 6" | 2" | 000000 | 00000 |
| 12V DC | K | 7 | 360 | 0.187" | 0.187" | __ | 3.9" | 6" | 2.6" | 000000 | 00000 |
Tab | |||||||||||
| 12V DC | B | 17.2 | 850 | __ | __ | __ | 6.6" | 7.1" | 3" | 000000 | 000000 |
Threaded Insert | |||||||||||
| 12V DC | B | 28 | 1,500 | __ | __ | M5 | 5" | 6.6" | 7" | 000000 | 000000 |
| 12V DC | C | 35 | 1,800 | __ | __ | M6 | 6.6" | 7.7" | 5.2" | 000000 | 000000 |
| 12V DC | C | 60 | 3,000 | __ | __ | M6 | 8.5" | 9.1" | 5.5" | 000000 | 000000 |
| 12V DC | C | 78 | 4,000 | __ | __ | M6 | 8.2" | 10.2" | 6.7" | 0000000 | 000000 |
| 12V DC | C | 98.8 | 5,200 | __ | __ | M6 | 8.2" | 12" | 6.7" | 0000000 | 000000 |
Sealed Large-Cell Batteries for Starting and Continuous Use
 |  Offset Tab Post | Threaded Stud | Post and Side Socket | |
Post | Tab Post | Post and Threaded Stud | ||
Terminal Location A | Terminal Location C | Terminal Location D | Terminal Location B | Terminal Location E |
Deliver a surge of power to start automobiles and other vehicles, and provide power over a long time. These batteries are deep cycle, so they can handle many charge/deep discharge cycles. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Manufacturer Equivalent Number | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Post and Threaded Stud | ||||||||||||
| 6V DC | GC2 | __ | A | 190 | 380 | 900 | 5/16"-18 | 10.9" | 10.3" | 7.1" | 00000000 | 0000000 |
| 12V DC | 27 | 27M | C | 92 | 175 | 900 | 5/16"-18 | 9.9" | 12.8" | 6.8" | 00000000 | 000000 |
| 12V DC | 24 | 24M | C | 79 | 135 | 800 | 5/16"-18 | 9.9" | 10.9" | 6.8" | 00000000 | 000000 |
| 12V DC | 31 | 31M | D | 105 | 200 | 1,000 | 5/16"-18 | 9.4" | 12.9" | 6.8" | 00000000 | 000000 |
Offset Tab Post | ||||||||||||
| 12V DC | 22NF | __ | B | 55 | 85 | 420 | __ | 9.3" | 9.4" | 5.5" | 00000000 | 000000 |
Threaded Stud | ||||||||||||
| 12V DC | 31 | __ | D | 100 | 190 | 1,050 | 3/8"-16 | 9.5" | 13" | 6.8" | 00000000 | 000000 |
Post and Side Socket | ||||||||||||
| 12V DC | 34/78 | __ | C | 55 | 120 | 955 | __ | 8" | 10.8" | 6.9" | 00000000 | 000000 |
Post | ||||||||||||
| 12V DC | 4D | __ | E | 198 | 380 | 1,420 | __ | 10" | 20.8" | 8.5" | 00000000 | 000000 |
| 12V DC | 65 | __ | C | 75 | 150 | 955 | __ | 7.6" | 12" | 7.4" | 00000000 | 000000 |
| 12V DC | 8D | __ | E | 245 | 480 | 1,800 | __ | 10" | 20.8" | 11" | 00000000 | 000000 |
Tab Post | ||||||||||||
| 12V DC | U1 | __ | C | 32 | 45 | 240 | __ | 7.3" | 8.3" | 5.1" | 00000000 | 000000 |
Sealed Large-Cell Batteries for Starting
 |  Box Tab with Two Openings |
Terminal Location B |
Start automobiles and other vehicles with a surge of power. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.
Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Terminal Location | Cold Cranking Amps | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | ||||||||
|---|---|---|---|---|---|---|---|---|
Box Tab with Two Openings | ||||||||
| 12V DC | Y50-N18L-A | B | 340 | 6.4" | 8.1" | 3.6" | 0000000 | 0000000 |
Fast-Charging Large-Cell Batteries
An alternative to wet- and dry-cell large-cell batteries, these lithium iron phosphate (LiFePO4) batteries charge more quickly and can be recharged thousands of times. With excellent chemical stability, they reduce the risk of thermal runaway if exposed to overheating or short circuiting. Use them for uninterruptible power supplies (UPS) and emergency lights.
Note: These batteries must be used with LiFePO4-compatible chargers.
Chargers (sold separately) automatically switch from fast charging to maintaining the charge level, so they won’t overcharge and damage the battery.
Floor Locks
Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
For technical drawings and 3-D models, click on a part number.
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Steel | |||||||||||||
| 5"-7" | 7 1/4" | 3 3/8" | 3 7/8" | 2 | 4" | 4" | 2 5/8" | 2 3/8" | No | 3/8" | Black | 0000000 | 0000000 |