If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

When the power goes out, these flashlights automatically light up. Keep them plugged in, and they'll switch on when there's an outage. The head tilts so you can aim light wherever you need it. Unplug them to carry them around and use them like a standard flashlight. They have a flat bottom, so you can work hands-free without them rolling away. And if you need a task light, stand them on their end and tilt the light at a right angle. Ideal for lighting up long distances, they cast a spot beam with a bright center. The status indicator lets you know when they need a recharge. Rated IP04, these flashlights withstand liquid splashed from all angles.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.

Style A have a handle that props them up. It fully rotates so you can aim the light beam where it’s needed.

Style B have a domed, lantern-style top that diffuses light for 360° illumination. Place them next to your work or hang them up from their built-in hook. To protect against drops, they have four carrying handles that stick out to absorb impact. Control these floodlights with your device via Bluetooth by downloading the free app.

Style C double as a toolbox—the lights are built into the lid. It has two light heads that pivot to aim light where you need it. You can detach the lid and hang it up with the built-in hook. To conserve battery, these floodlights have seven brightness levels to choose from. They’ll also run on AC power with an extension cord (not included).

IP54-rated floodlights are sealed against humidity and splashing and falling liquids, so they’re good for the outdoors and other damp spaces. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

Compact and easy to carry, these ETL Listed lights stand up to low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. They also have a durable tempered-glass lens to protect the LEDs.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped. They're often used on high-traffic job sites. They shine light 360°.

Floodlights with a steel guard offer added protection.

Floodlights with an outlet let you connect multiple lights to one circuit—plug them into each other just like string lights.

IP54- and IP55-rated lights can work outdoors and in other damp environments—they seal out humidity and dripping, splashing, and falling liquids. They also stay protected in dusty conditions. IP55-rated lights are sealed against low-pressure washdowns.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed. The light heads are detachable, so you can bring light into areas where the stand won't fit. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. All have tempered glass lenses to protect the LEDs.

Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice. To choose your perfect light position, raise the mast up and down, then rotate and tilt the head. Ideal for tough jobsites, their polycarbonate lens resists impact. A battery life indicator lets you know when to recharge. You can still use them when they’re charging. They also have a 12V socket, also known as a vehicle outlet, to plug devices in and charge them. Adjust the light output using the keypad.

Style A have a handle and shoulder strap for easy transport.

Style B have two heads for double the brightness of Style A. These floodlights come with a USB adapter to charge up to two phones. With wheels and a retractable handle, you can move these floodlights around like a suitcase.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). You can also power them with an extension cord (not included). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it. When you're done using them, fold them up. They have a handle for easy transport.

Built to handle tough jobsites, their legs and plastic lens resist impact. And they’ll work outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. Plus, they’re protected against dirty, dusty conditions.

Style B have three light heads for more than double the brightness of Style A. Each one pivots for multidirectional lighting. With a built-in M18 charger, you can charge the battery if you plug in an extension cord. They also have a USB port for charging phones and other devices.

Note: Battery life depends on the size of your battery.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed. When you're done using them, fold them up. They have a handle for easy transport.

Built for tough jobsites, these floodlights have an impact-resistant plastic lens. And rated IP55, they’re sealed against humidity and low-pressure washdowns, so they’re good to use outside and in other damp areas. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field. Also known as light towers, they rise up to 23 ft. To direct light where you want it, pivot any of the four heads. You can also rotate the mast, even if it’s already raised.

Rated IP65, these floodlights are protected against dust and low-pressure washdowns. That means rain won’t be a problem. They’ll also handle winds up to 65 mph. Just secure the hitch and two side supports to the ground with the attached leveling jacks. These floodlights will work in the cold, but not in subzero temperatures.

For towing from jobsite to jobsite, these floodlights have a trailer with a ball hitch and tongue. They also come with safety chains, which have a 7,800-lb. load capacity. The trailer’s lights are D.O.T. approved for road use.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Style C have a handle that folds down for compact storage.

IP04-rated lanterns keep out dripping, splashing, and falling liquids, as well as humidity. IP07-rated lanterns withstand temporary submersion, so they’ll still work if you drop them in water.

Lanterns that meet ANSI/PLATO FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable. Use them to illuminate small and microscopic parts. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration. Attach them to your workspace for additional lighting. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a cool or daylight appearance highlight white/blue tones, which is good for inspecting.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

For technical drawings and 3-D models, click on a part number.

This light is sealed to withstand shallow water, such as ponds and fountains. It has a durable tempered-glass lens to protect the bulb. It's furnished with a halogen bulb that casts a warm, yellow-toned light that's similar in apprearance to incandescent lights.

Bend the lamp and magnifying lens to any position—they’re mounted on separate arms for a flexible, hands-free setup. These magnifiers have a weighted base that holds them in place while you inspect parts, record observations, and make repairs with both hands. Peer through the bifocal lens to view parts at four times their size. Or angle the lamp to spot issues that are difficult to detect under overhead light, such as surface scratches or soldering defects.

Sturdy but flexible, these illuminated magnifiers have a weighted base to keep them still without tethering them to your workbench. A ring of LEDs creates even lighting for shadow-free inspections of electronics, soldered assemblies, and other parts full of nooks and crevices. Adjust the brightness with the dimmer to reduce glare on reflective surfaces. The sturdy pivoting arm holds its position more rigidly than gooseneck arms.

Magnifiers with a steel arm are more durable and less likely to dent than those with an aluminum arm. Magnifiers with an aluminum arm are lighter in weight than those with a steel arm.

Magnifiers with an enclosed spring block debris from getting stuck and hindering arm movement. Magnifiers with an open spring are lightweight and have knobs at the top of the arm to precisely adjust the position of the lens. The springs are easy to clean but require more maintenance because dust and debris can get stuck in them.

Magnifiers with a pivoting head let you adjust the lens up and down independently of the arm. Magnifiers that have heads with 360° rotation let you adjust the lens in all directions for precise angling.

Magnifiers with a neutral light appearance look less blue than those with a cool or daylight light appearance, causing less strain on your eyes over longer periods of use. Magnifiers with a daylight light appearance produce a crisp and clean light ideal for inspection. They’re brighter than those with a neutral light appearance and highlight white and blue tones.

Magnifiers with an ESD-safe (electrostatic discharge) coating dissipate static electricity, so they won’t pass along harmful charges if they touch sensitive components.

Use an add-on lens for greater magnification. To calculate overall magnification, add the magnification strength of the add-on lens with the strength of the existing lens.

Make fine details and defects on textured surfaces visible. These magnifiers cast light from an angle instead of above like standard illuminated magnifiers. This creates shadows that highlight irregularities, such as a contaminant embedded in a sheet of raw material. The light is a bright LED that mimics natural daylight for a crisp, clear view. To prevent scratches that could block your view, these magnifiers have a glass lens instead of plastic.

With a weighted base, you can easily move these magnifiers around. They have a long arm that pivots 360° and stays steady even when there’s vibration. The spring that moves the arm is enclosed, which means it won’t get jammed from dirt or debris.

For technical drawings and 3-D models, click on a part number.

This versatile light can be secured in the stand or removed for hand-held use. A switch lets you select between UV and white fluorescent light. These lights cannot be sold to Canada due to local regulations on mercury content.

Safely cure light-activated adhesives, coatings, and ink or strengthen 3D-printed resin parts with UV light in these enclosed chambers. Also known as flood curing, they evenly cure your parts. They work just like a microwave. Plug them in, set your time, and they’re ready to cure.

Chambers with a turntable are ideal for large and intricate 3D printed parts. The turntable rotates parts under the lights for even exposure while curing. Because these chambers use low-intensity LED bulbs and only operate when the door is closed, additional UV-protective glasses or clothing while using them are not required.

Chambers with a shelf create a deep, consistent cure and work best with small and flat parts. You can position parts closer to the bulb with the adjustable shelf for a faster curing. An automatic lamp shutter covers and reduces power to the bulb when you open the door. You should always wear UV-protective glasses and clothing when the system is turned on because of their high-intensity light. To remotely monitor and control these chambers, connect them to a computer or PLC.

Chambers and replacement bulbs that cannot be sold to Canada are restricted by regulations on limiting mercury content.

For technical drawings and 3-D models, click on a part number.

Use these lamps for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.