These heaters require a separate temperature switch or controller to regulate heat output.

For more durability than other adhesive-mount heaters, a thick layer of fiberglass-reinforced silicone rubber encases the heating element.

These heaters are rated for environments where hazardous material is present.

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Attach to flat metal surfaces.

The thermostat automatically turns these heaters on when the temperature drops below 38° F and turns them off when the temperature reaches 45° F.

These heaters require a separate temperature switch or controller to regulate heat output.

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

These heaters have a large surface area to quickly dissipate heat in air and inert gas heating systems used in ducts, ovens, and dryers.

Often used for freeze protection in outdoor containers, these heaters float on the water’s surface and automatically keep the temperature between 45° and 65° F.

Snap these heaters on a DIN rail inside your enclosure to keep electronics safe from cold and moisture.

A sensor attached to the heater might signal that it’s warm enough near the heater, while other parts of the enclosure are still cold. Moving the sensor away from the heater helps you keep electronics warm and dry, anywhere in the enclosure.

Under 2 ½” long, these tiny heaters fit in tight spaces, such as security camera enclosures. For localized heat in a large enclosure, place them near batteries and other parts that don’t work well in the cold.

Evenly warm a large space with steam and water from your existing boilers.

Use steam from your existing boilers to evenly warm a large space.

Focus warm air in a specific spot.

Use where flammable gases, vapors, and dust are present—these heaters meet NEC Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Heat shops, garages, warehouses, and other large spaces with these heaters that can be suspended from the ceiling.

Often installed below windows, the low profile design keeps these heaters out of the way.

Use where flammable gases and vapors are present—these heaters meet NEC Class I, Divisions 1 and 2, Groups C and D.

Our most powerful ceiling mount direct heaters, these warm people in large spaces, such as warehouses.

Move these heaters to worksites, loading docks, and other cold spots to warm people in indoor and sheltered outdoor areas.

Stay warm at a desk, counter, or table.