Miniature T-Slotted Framing and Fittings
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings. The framing has continuous T-slots for attaching fittings with the included mounting fasteners.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
To install outside corner and three-way outside corner brackets, tap the existing hole in the end of each rail and screw the bracket on.
Silver | ||||||||
|---|---|---|---|---|---|---|---|---|
| Corner Bracket Style | For Rail Ht., mm | Lg. | Rail Machining | Required Tap Thread Size  | Mounting Fasteners Included | Includes | Each | |
| Corner | 10 | 31/64" | Not Required | __ | Yes | 2 Nuts, 2 Screws | 5969N42 | 00000 |
| Extended Corner | 10 | 51/64" | Not Required | __ | Yes | 4 Nuts, 4 Screws | 5969N43 | 0000 |
| Outside Corner | 10 | 13/32" | Required | M3 | Yes | 2 Caps, 2 Screws | 5969N31 | 0000 |
| Three-Way Outside Corner | 10 | 13/32" | Required | M3 | Yes | 3 Caps, 3 Screws | 5969N32 | 0000 |
Surface brackets connect rails without machining.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Flush 90° angle brackets create a more finished appearance than standard 90° angle brackets. However, they are not as strong.
Silver | |||||||
|---|---|---|---|---|---|---|---|
| Surface Bracket Style | For Rail Ht., mm | Lg. | Rail Machining | Mounting Fasteners Included | Includes | Each | |
| Extended Straight | 10 | 1 37/64" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N36 | 00000 |
| Square | 10 | 51/64" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N37 | 0000 |
| 90° Angle | 10 | 1 3/16" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N38 | 0000 |
| Flush 90° Angle | 10 | 1 3/16" | Not Required | Yes | 4 Nuts, 4 Screws | 5969N39 | 0000 |
| Tee | 10 | 1 3/16" | Not Required | Yes | 5 Nuts, 5 Screws | 5969N41 | 0000 |
Pivots allow you to connect and position rails at multiple angles. Position the rail and then tighten the bolt to secure.
Bearing | Silver | ||||||
|---|---|---|---|---|---|---|---|
| For Rail Ht., mm | Range of Motion | Material | Type | Mounting Fasteners Included | Includes | Each | |
| 10 | 180° | Aluminum | Sleeve | Yes | 2 Nuts, 2 Screws | 5969N34 | 000000 |
Hinges provide smooth motion between two rails.
Silver | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Hinge Connection Type | Pin Type | For Rail Ht., mm | For Number of Rails | Lg. | Ht. | Mounting Fasteners Included | Includes | Each | |
| Rail-to-Rail | Nonremovable | 10 | 2 | 7/8" | 13/16 " | Yes | 4 Nuts, 4 Screws | 5969N33 | 000000 |
End caps snap on to protect the ends of rails from damage and keep out dust and grime.
Black | ||||
|---|---|---|---|---|
| For Rail Ht., mm | Mount Type | Pkg. Qty. | Pkg. | |
| 10 | Push In | 4 | 5969N26 | 00000 |
Head
Cap Screw
Fasteners secure brackets and other accessories to rails.
Self-aligning end-feed nuts slide into the end of the rail to attach components. A ridge keeps them centered in the T-slot.
Silver | ||||||||
|---|---|---|---|---|---|---|---|---|
| Fastener Type | Material | For Rail Ht., mm | Thread Size | Lg., mm | Thick., mm | Pkg. Qty. | Pkg. | |
| Button Head Cap Screw | Zinc-Plated Steel | 10 | M3 | 4 | __ | 40 | 5969N22 | 000000 |
| Button Head Cap Screw | Zinc-Plated Steel | 10 | M3 | 5 | __ | 40 | 5969N23 | 0000 |
| Flat Head Screw | Zinc-Plated Steel | 10 | M3 | 4 | __ | 40 | 5969N24 | 00000 |
| Flat Head Screw | Zinc-Plated Steel | 10 | M3 | 5 | __ | 40 | 5969N25 | 00000 |
| Self-Aligning End-Feed Nut | 17-4 PH Stainless Steel | 10 | M3 | __ | 2.6 | 20 | 5969N21 | 00000 |
Press-Fit Framing and Fittings
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Press standard fittings and accessories into the rail and hammer with a rubber mallet.
Flanged and slotted rails have flanges or slots that run the length of the rail to mount panels, bins, conveyor stops, and other accessories.
Rail | Flange | Slot | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Thick. | Ht. | Wall Thick. | Wall Thick. | For Max. Panel Thick. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 4 ft. Lg. | 5 ft. Lg. | 6 ft. Lg. | 7 ft. Lg. | 8 ft. Lg. | |
Square | ||||||||||||||||
| 1" | 1" | __ | __ | __ | __ | 0.05" | __ | 47045T28 | ||||||||
Single Flanged | ||||||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | __ | 47045T11 | ||||||||
Single Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T29 | ||||||||
Flush Slotted | ||||||||||||||||
| 0.595" | 1" | __ | __ | 1" | 0.08" | 0.05" | 0.27" | 47045T16 | ||||||||
| 3" | 1" | __ | __ | 1" | 0.08" | 0.05" | 0.45" | 47045T15 | ||||||||
Double Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T26 | ||||||||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 47045T25 | ||||||||
Double I-Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 47045T27 | ||||||||
I-Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T18 | ||||||||
I-Flanged | ||||||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | __ | 47045T12 | ||||||||
I-Slotted/Single Flanged | ||||||||||||||||
| 1" | 1" | 5/8" | 0.1" | 1/2" | 0.05" | 0.05" | 1/2" | 47045T19 | ||||||||
L-Flanged | ||||||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 1/4" | 47045T13 | ||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 3/4" | 47045T14 | ||||||||
L-Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T31 | ||||||||
T-Slotted | ||||||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T32 | ||||||||
Press standard fittings and accessories into the rail and hammer with a rubber mallet.
Flanged and slotted rails have flanges or slots that run the length of the rail to mount panels, bins, conveyor stops, and other accessories.
Rail | Flange | Slot | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Thick. | Ht. | Wall Thick. | Wall Thick. | For Max. Panel Thick. | 4 ft. Lg. | 8 ft. Lg. | |
Square | ||||||||||
| 1" | 1" | __ | __ | __ | __ | 0.05" | __ | 5325N111 | ||
Single Flanged | ||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 1/4" | 5325N112 | ||
Single Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 5325N118 | ||
Flush Slotted | ||||||||||
| 5/64" | 5/8" | __ | __ | 1" | 0.05" | 0.05" | 0.45" | 5325N117 | ||
| 5/64" | 3" | __ | __ | 1" | 0.05" | 0.05" | 0.45" | 5325N116 | ||
Double Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 5325N125 | ||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 5325N124 | ||
Double I-Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 5325N126 | ||
I-Flanged | ||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 1/4" | 5325N113 | ||
I-Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 5325N119 | ||
I-Slotted/Single Flanged | ||||||||||
| 1" | 1" | 5/8" | 0.1" | 1/2" | 0.05" | 0.05" | 1/4" | 5325N121 | ||
L-Flanged | ||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 1/4" | 5325N114 | ||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 3/4" | 5325N115 | ||
L-Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 5325N122 | ||
T-Slotted | ||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 5325N123 | ||
Quick-release fittings use a button system. Use quick-release rails and quick-release connectors together.
Flanged and slotted rails have flanges or slots that run the length of the rail to mount panels, bins, conveyor stops, and other accessories.
Rail | Flange | Slot | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Thick. | Ht. | Wall Thick. | Wall Thick. | For Max. Panel Thick. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 4 ft. Lg. | |
Square | ||||||||||||
| 1" | 1" | __ | __ | __ | __ | 0.05" | __ | 47045T449 | ||||
Single Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T441 | ||||
Single Flanged | ||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | __ | 47045T37 | ||||
Double Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T447 | ||||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 47045T446 | ||||
Double I-Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/2" | 0.05" | 0.05" | 1/4" | 47045T448 | ||||
I-Flanged | ||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | __ | 47045T38 | ||||
I-Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T442 | ||||
I-Slotted/Single Flanged | ||||||||||||
| 1" | 1" | 5/8" | 0.1" | 1/4" | 0.05" | 0.05" | 1/2" | 47045T443 | ||||
L-Flanged | ||||||||||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 1/4" | 47045T39 | ||||
| 1" | 1" | 5/8" | 0.1" | __ | __ | 0.05" | 3/4" | 47045T41 | ||||
L-Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T444 | ||||
T-Slotted | ||||||||||||
| 1" | 1" | __ | __ | 1/4" | 0.05" | 0.05" | 1/4" | 47045T445 | ||||
Press standard fittings and accessories into the rail and hammer with a rubber mallet.
For Rail | Black Plastic | Gray Plastic | Black Steel | |||||
|---|---|---|---|---|---|---|---|---|
| Press-Fit Framing Component Shape | Ht. | Wd. | Each | Each | Each | |||
| Straight | 1" | 1" | 47045T402 | 00000 | 47045T403 | 00000 | ______ | 00 |
| 90° Elbow | 1" | 1" | 47045T81 | 0000 | 47045T401 | 0000 | ______ | 00 |
| Three-Way 90° Elbow | 1" | 1" | 47045T82 | 0000 | 47045T404 | 0000 | ______ | 00 |
| Tee | 1" | 1" | 47045T83 | 0000 | 47045T405 | 0000 | ______ | 00 |
| Four-Way Tee | 1" | 1" | 47045T84 | 0000 | 47045T406 | 0000 | ______ | 00 |
| Cross | 1" | 1" | 47045T86 | 0000 | 47045T407 | 0000 | ______ | 00 |
| Five-Way Cross | 1" | 1" | 47045T85 | 0000 | 47045T408 | 0000 | ______ | 00 |
| Six-Way Cross | 1" | 1" | ______ | 00 | ______ | 00 | 47045T409 | 000000 |
Quick-release fittings use a button system. Use quick-release rails and quick-release connectors together.
For Rail | Black Plastic | Gray Plastic | ||||
|---|---|---|---|---|---|---|
| Press-Fit Framing Component Shape | Ht. | Wd. | Each | Each | ||
| Straight | 1" | 1" | 47045T413 | 000000 | 47045T414 | 000000 |
| 90° Elbow | 1" | 1" | 47045T411 | 00000 | 47045T412 | 00000 |
| Three-Way 90° Elbow | 1" | 1" | 47045T415 | 00000 | 47045T416 | 00000 |
| Tee | 1" | 1" | 47045T417 | 00000 | 47045T418 | 00000 |
| Four-Way Tee | 1" | 1" | 47045T419 | 00000 | 47045T421 | 00000 |
| Cross | 1" | 1" | 47045T422 | 00000 | 47045T423 | 00000 |
| Five-Way Cross | 1" | 1" | 47045T424 | 00000 | 47045T425 | 00000 |
Rail ends attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings. 6”- and 12”-tall rail ends require a connector.
For Rail | Flange | Mounting Holes | Black Powder-Coated Steel | Gray Powder-Coated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Ht. | Ht. | Wd. | Shape | Lg. | Wd. | No. of | Dia. | Mounting Fasteners Included | Each | Each | ||
| 4" | 1" | 1" | Square | 3" | 3" | 4 | 1/4" | No | 47045T66 | 000000 | 47045T426 | 000000 |
| 6" | 1" | 1" | Square | 3" | 3" | 4 | 1/4" | No | 47045T427 | 00000 | 47045T428 | 00000 |
| 12" | 1" | 1" | Square | 3" | 3" | 4 | 1/4" | No | 47045T429 | 00000 | 47045T431 | 00000 |
Hinges have four mounting holes; drill matching holes in the rails and secure with the included fasteners.
Leveling and swivel caster mounting feet fit directly into the end of the rail.