Determine the amount of gasoline, diesel fuel, and kerosene that flows through these totalizers.

Measure the total amount of liquid flowing through these totalizers.

The digital display on these totalizers makes it easy to check the total amount of high-temperature liquid—up to 200° F—passing through your system.

Measure the amount of light oil that flows through these totalizers.

Flanged ends let you securely integrate these totalizers into large drinking water pipelines to measure the cumulative amount of water flowing through them.

Often used in hard-to-access areas, these totalizers let you monitor the total amount of drinking water flowing through them up to 250 feet away.

Use these flowmeter/totalizers to measure both the flow rate and total flow volume of oil, gasoline, diesel fuel, and kerosene.

Using the flanged ends, securely install these flowmeter/totalizers in large, high-flow pipelines to measure the flow rate and total volume of liquid flowing through.

Easy to remove for cleaning and maintenance, these flowmeter/totalizers connect to sanitary quick-clamp fittings (often called tri-clamp fittings) and measure the flow rate and volume of liquid passing through your system.

No need to disassemble your PVC pipeline—insert these flowmeters into a drilled hole and secure them using the included clamps.

Measure the flow rate of liquids up to 212° F.

To avoid metal contaminating liquids, such as deionized water, these flowmeters are made entirely of plastic and rubber.

A spring piston instead of a float allows these flowmeters to measure flow rate in any mounting orientation.

A large dial instead of a scale makes it easier to read the flow rate from a distance.

Install these flowmeters securely into large pipelines with the flanged ends.

Install these flowmeters in an instrument panel where they might be exposed to blows and other impact.

If the oil in your line is too hot or pressurized for standard flowmeters, use these flowmeters to measure the flow rate.

A case protects these flowmeters from blows and other impact as they measure the flow rate of gas. Install them in instrument panels using the fittings on the back.

Monitor the flow rate of air and other gases from your instrument panel—these flowmeters have fittings on the back for panel mounting.

Designed for air and other gases, these flowmeters measure the rate at which they're moving through your pipes.

For use with water, hydraulic fluid, and diesel, install these gauges through the top of your tank.

Mount these gauges on the flat end of a horizontal, cylindrical tank to monitor diesel fuel, fuel oil, or gasoline level.

Using inches or centimeters instead of common levels, such as full or empty, these gauges are more precise than standard gauges when measuring liquid levels. They work with water, hydraulic fluid, or diesel.

Monitor liquid level in applications that have vibration, high pressures, and high temperatures. These indicators are also known as armored level gauges.

Combine a pair of valves with a gauge glass and four guard rods to build a complete level indicator.

Check both the temperature and the hydraulic fluid or oil level in a pressurized system.

Bend these flexible indicators around the contours of your hydraulic fluid, oil, or water tank. Because their plastic resists shattering, they don’t need a protective shield like other liquid-level indicators, so you can check your tank’s level from any angle.

Made with clear, shatter-resistant plastic, these indicators don't require a shield to protect them like other oil-level indicators, so you can check your hydraulic fluid or oil level from any angle.

The nylon body and window make these indicators shatter resistant.

Use in high-pressure applications up to 2,000 psi.