Commonly used to transfer gasoline, this hose is also known as curb pump hose.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

Use this durable, flexible hose in pressures up to 5,000 psi. Its braided construction gives it the highest pressure rating of any chemical hose in our offering.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Step on this hose and it springs back to its original shape.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

No need for a gasket—this hose’s PTFE liner flares out as it passes through the flanges, so your line’s contents never touch the fittings.

Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.

Slide these clamps over your hose and heat-shrink them with a heavy duty heat gun. This process lets them conform to any shape hose.

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

Clamps offer extra holding power in high-torque applications.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Make quick changeovers without sacrificing a tight seal.

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Used to secure Viega PEX fittings to Viega PEX tubing, these clamps meet an ASTM standard to ensure compatibility.

To prevent removal, these clamps can only be loosened with a special bit or screwdriver.

Made of nylon, these clamps have excellent corrosion and chemical resistance, don’t conduct electricity, and weigh less than metal clamps.

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.

Turn the slotted head screw to quickly release the band. These clamps have rounded edges and a smooth interior, so they won’t cut into hose and tube materials.

Remove the bolt and flip open the hinged bridge to install.

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.