About Air Preparation
More
Full-Face Respirators

Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter when breathing through these respirators becomes difficult.
N95 respirators filter out 95% of solid particles. They are not oil resistant.
P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.
Respirators | Replacement Cartridges | Replacement Filters | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Filter Rating | For Use With | NIOSH Approval | Assigned Protection Factor | Mask Material | Lens Material | Choose a Size | Each | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | |||
__ | Organic Vapors | TC-23C-4063 | 50 | TPE Rubber | Polycarbonate Plastic | 00000000 | 0000000 | 2 | 00000000 | 000000 | __ | 000000 | 00 | |
__ | Organic Vapors, Acid Gases | TC-23C-4065 | 50 | TPE Rubber | Polycarbonate Plastic | 00000000 | 000000 | 2 | 00000000 | 00000 | __ | 000000 | 00 | |
__ | Ammonia, Methylamine | TC-23C-4066 | 50 | TPE Rubber | Polycarbonate Plastic | 00000000 | 000000 | 2 | 00000000 | 00000 | __ | 000000 | 00 | |
N95 | Solid Particles, Organic Vapors | TC-84A-9635 | 50 | TPE Rubber | __ | 00000000 | 000000 | 2 | 00000000 | 00000 | 2 | 00000000 | 00000 | |
P100 | Solid Particles | TC-84A-9467 | 50 | TPE Rubber | Polycarbonate Plastic | 00000000 | 000000 | __ | 000000 | 00 | 2 | 00000000 | 00000 | |
P100 | Solid Particles, Organic Vapors, Acid Gases | TC-84A-9708 | 50 | TPE Rubber | Polycarbonate Plastic | 00000000 | 000000 | 2 | 00000000 | 00000 | __ | 000000 | 00 |
Respirator Filters








Replace the filter on your respirator when breathing becomes difficult.
N95 filters filter out 95% of solid particles. They are not oil resistant.
N99 filters filter out 99% of solid particles. They are not oil resistant.
P95 filters resist oil exposure for up to 40 hours and filter out 95% of solid particles.
P100 filters resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.
Manufacturer Model Number | Filter Rating | For Use With | Pkg. Qty. | Pkg. | |
3M HF-800 | |||||
---|---|---|---|---|---|
D3091 | P100 | Solid Particles | 2 | 000000000 | 000000 |
D7N11 | N95 | Solid Particles | 10 | 000000000 | 00000 |
3M | |||||
Compatible with 5000 Series | |||||
5N11 | N95 | Solid Particles | 10 | 0000000 | 00000 |
Compatible with 6000, 6500, 7000, and FF-400 Series | |||||
2071 | P95 | Solid Particles | 2 | 0000000 | 0000 |
2091 | P100 | Solid Particles | 2 | 0000000 | 00000 |
Honeywell North 7190 | |||||
Compatible with 7190N99 | |||||
719009N99 | N99 | Solid Particles | 2 | 0000000 | 00000 |
Honeywell North N | |||||
Compatible with 5400, 5500, 7600, 7700, RU6500, RU8500, and RU8800 Series | |||||
7506N95 | N95 | Solid Particles | 10 | 000000000 | 00000 |
7580P100 | P100 | Solid Particles | 2 | 000000000 | 00000 |
Moldex | |||||
7740 | P100 | Solid Particles | 2 | 00000000 | 00000 |
7910 | N95 | Solid Particles | 2 | 00000000 | 0000 |
Compatible with 7000 and 9000 Series | |||||
7950 | P100 | Solid Particles | 2 | 00000000 | 00000 |
Compatible with 7000, 7800, and 9000 Series | |||||
7940 | P100 | Solid Particles | 2 | 00000000 | 00000 |
7960 | P100 | Solid Particles | 2 | 00000000 | 00000 |
8910 | N95 | Solid Particles | 10 | 00000000 | 00000 |
MSA Comfo | |||||
Compatible with Comfo Classic, Duo-Twin, Ultra Elite, and Ultra-Twin Series | |||||
816662 | N95 | Solid Particles | 10 | 0000000 | 00000 |
3M Retainer for N95 Filter (Pkg. of 1) | 0000000 | Pkg. | 00000 |
3M Filter Adapter for P95 and P100 Filters (Pkg. of 1) | 0000000 | Pkg. | 0000 |
Honeywell North N Cartridge for N95 Filter (Pkg. of 2) | 000000000 | Pkg. | 00000 |
Moldex Filter Adapter (Pkg. of 2) | 00000000 | Pkg. | 0000 |
Moldex Filter Retainer (Pkg. of 2) | 00000000 | Pkg. | 0000 |
Moldex Filter Cover (Pkg. of 2) | 00000000 | Pkg. | 0000 |
Respirator Fit Test Kits

Get everything you need to perform up to 30 OSHA-approved qualitative fit tests on your respirators.
Note: Respirators must be equipped with an organic vapor cartridge.
Useful Life | Includes | Specifications Met | Each | |
30 Tests | Bitrex Fit Test Solution, Bitrex Sensitivity Test Solution, Fit Test Forms, Hood, Solution Applicators | OSHA Compliant 29 CFR 1910.134 | 00000000 | 0000000 |
Supplied-Air Full-Face Respirators for Air Pumps

The portable pump on these respirators provides a continuous supply of clean air for one person.
Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.
Lens | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | NIOSH Approval | Size | Mask Material | Material | Ht. | Wd. | Flow Rate | Hose Lg., ft. | Max. Span, ft. | Motor Type | Power Source | Motor Power | Voltage | Plug Type | Cord Lg., ft. | Each | |
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0322 | M/L | Silicone Rubber | Polycarbonate Plastic | 10" | 7" | 10 cfm @ 5 psi | 50 | 300 | Open Dripproof | Electric | 3/4 hp | 115V AC | Three Prong | 8 | 0000000 | 000000000 |
Supplied-Air Hood Respirators for Air Pumps

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection.
Pinlock suspension hats adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.
Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.
Lens | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | NIOSH Approval | Adjustment Style | Hat Size | Material | Ht. | Wd. | Required Flow Rate, cfm | Flow Rate | Hose Lg., ft. | Motor Type | Power Source | Motor Power, hp | Voltage | Plug Type | Cord Lg., ft. | Each | |
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0154 | Ratchet | 6 1/2-8 | PETG Plastic | 6" | 16" | 6-15 | __ | 50 | __ | __ | __ | __ | __ | __ | 000000 | 0000000 |
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0154 | Pinlock | 6 1/2-8 | Acetate Plastic | 6" | 16" | 6-15 | 10 cfm @ 5 psi | 50 | Open Dripproof | Electric | 3/4 | 115V AC | Three Prong | 8 | 0000000 | 00000000 |
Filters for Supplied-Air Respirator Pumps


Replace the filter in your pump to supply clean air to your respirator.
Supplied-Air Helmet Respirators for Air Pumps

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.
Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.
Lens | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | NIOSH Approval | Hat Size | Material | Ht. | Wd. | Required Flow Rate, cfm | Hose Lg., ft. | Max. Span, ft. | Connection Type | Quick-Disconnect Shape | Coupling Size | Specifications Met | Each | |
Solid Particles, Organic Vapors, Abrasive Blasting Media, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0293 | 6 1/2-8 | Acetate Plastic | 5" | 14" | 6-15 | 100 | 300 | Quick-Disconnect Hose Coupling | Industrial | 1/2 | ANSI/ISEA Z87.1+, ANSI/ISEA Z89.1 Class C | 00000000 | 000000000 |
Optional 100-ft. Extension Hose | 0000000 | Each | 0000000 |
Replacement Outer Lens (Pkg. of 10) | 00000000 | Pkg. | 0000 |
Replacement Breathing Tube | 00000000 | Each | 000000 |
Replacement Adhesive-Backed Lens Covers (Pkg. of 10) | 00000000 | Pkg. | 0000 |
Optional 50-ft. Extension Hose | 0000000 | Each | 000000 |
3/4-hp Pump | 00000000 | Each | 00000000 |
Replacement Inner Helmet Shell and Pinlock Suspension | 00000000 | Each | 00000 |
Replacement Cape | 00000000 | Each | 000000 |
Replacement Inner Lens | 00000000 | Each | 0000 |
Supplied-Air Hood Respirators for Plant Air Lines

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.
Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.
Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.
Lens | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | NIOSH Approval | Size | Hat Size | Material | Lens Construction | Ht. | Wd. | Required Flow Rate, cfm | Hose Lg., ft. | Connection Type | Quick-Disconnect Shape | Coupling Size | Each | |
Solid Particles, Organic Vapors, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0154 | One Size | 6 1/2-8 | PETG Plastic | Solid | 6" | 16" | 6-15 | 25 | Quick-Disconnect Hose Coupling | Industrial | 1/4 | 000000 | 0000000 |
Optional 25-ft. Extension Hose | 0000000 | Each | 0000000 |
Optional 50-ft. Extension Hose | 0000000 | Each | 000000 |
Optional Cooling Tube with Temperature Control Valve | 0000000 | Each | 000000 |
Replacement Ratchet Suspension | 0000000 | Each | 00000 |
Replacement Hood | 000000 | Each | 00000 |
Optional Adhesive-Backed Lens Covers (Pkg. of 5) | 00000000 | Pkg. | 00000 |
Hot and Cold Tubes for Supplied-Air Respirators for Plant Air Lines


Adjust the temperature of the air flowing into your respirator. These tubes rapidly spin the air from your supply line to separate it into hot and cold streams. Turn a knob to control how much air from each stream flows into your respirator.
OD | Lg. | Air Temp. Increase, °F | Air Temp. Reduction, °F | Material | Belt Material | Connection Type | Quick-Disconnect Shape | Coupling Size | Includes | Features | Each | |
For Cooling | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1" | 8 1/4" | __ | 0° to 30° | Aluminum | Nylon Fabric | Quick Disconnect | Industrial | 1/4 | __ | Temperature Control Valve | 0000000 | 0000000 |
For Heating/Cooling | ||||||||||||
1" | 9" | 0° to 25° | 0° to 30° | Aluminum | Polypropylene Fabric | Quick Disconnect | Industrial | 1/4 | Cable Tie, Heat Shield | Temperature Control Valve | 00000000 | 000000 |
Supplied-Air Helmet Respirators for Plant Air Lines

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance. These respirators have a pinlock suspension that adjusts with interlocking straps.
Add extension hose (sold separately) to work up to 300 ft. from an air supply. To maintain NIOSH approval, respirators must be used with the hoses listed.
Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.
Lens | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use With | NIOSH Approval | Hat Size | Material | Ht. | Wd. | Required Flow Rate, cfm | Hose Lg., ft. | Connection Type | Quick-Disconnect Shape | Coupling Size | Specifications Met | Each | |
Solid Particles, Organic Vapors, Abrasive Blasting Media, Acid Gases, Ammonia, Formaldehyde, Methylamine | TC-19C-0293 | 6 1/2-8 | Acetate Plastic | 5" | 14" | 6-15 | 25 | Quick-Disconnect Hose Coupling | Industrial | 1/4 | ANSI/ISEA Z87.1+, ANSI/ISEA Z89.1 Class C | 00000000 | 000000000 |
Optional Heating/Cooling Tube with Temperature Control Valve | 00000000 | Each | 0000000 |
Replacement Cape | 00000000 | Each | 000000 |
Replacement Inner Helmet Shell and Pinlock Suspension | 00000000 | Each | 00000 |
Replacement Breathing Tube | 00000000 | Each | 000000 |
Replacement Adhesive-Backed Lens Covers (Pkg. of 10) | 00000000 | Pkg. | 0000 |
Optional Cooling Tube with Temperature Control Valve | 0000000 | Each | 000000 |
Optional 25-ft. Extension Hose | 0000000 | Each | 000000 |
Optional 50-ft. Extension Hose | 0000000 | Each | 000000 |
Replacement Inner Lens | 00000000 | Each | 0000 |
Replacement Outer Lens (Pkg. of 10) | 00000000 | Pkg. | 0000 |
Manifolds for Supplied-Air Respirators for Plant Air Lines

Divert compressed air from a single line to two respirators. Often used in plants with limited air sources, these manifolds allow two workers to share the same line. Shaped like a briefcase, they’re easy to tote around your facility—use them up to 300 ft. from an air source. The case is polypropylene, so it’s durable enough to hold up to wear and tear.
Overall | Pressure Regulating Max., psi | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Coupling Size | Outlet Coupling Size (No. of Outlets) | Max. Flow Rate, cfm | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy, psi | Inlet | Outlet | Each | |
Aluminum Housing | ||||||||||||
Quick-Disconnect Male Inlet and Female Outlets | ||||||||||||
1/2 | 1/4 (2 Regulated) | 100 | 125 | Yes | 19" | 13" | 140° | ±0.1 | 150 | 125 | 0000000 | 0000000 |
Filters for Supplied-Air Respirators for Plant Air Lines

Remove moisture, odors, and particles from your compressed air line before they reach respirators. These filters have a seven-stage purification process that captures particles as small as 0.5 microns. The mounting bracket doubles as a carrying handle to move them between air connection points in your facility.
To meet the OSHA standard for Grade D breathable air, these filters must be used with a carbon monoxide monitor to confirm that CO levels are safe. Replace filter inserts after five hundred hours of run time or if there’s a drop in pressure.
Filters | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Outlet | Overall | Replacement Filter Inserts | ||||||||||||
For Use With | No. of | Pipe Size | No. of | Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Dia. | Ht. | Features | Each | Each | ||
NPT Female Inlet and Outlet | |||||||||||||||
Powder-Coated Steel Housing with Manual Drain | |||||||||||||||
Solid Particles | 1 | 1 | 2 | 3/8 | 75 cfm @ 100 psi | 100 | 140° | 0.5 | 9 1/2" | 22" | Mounting Bracket | 00000000 | 0000000 | 00000000 | 000000 |
Breathing Tubes for Supplied-Air Respirators

Keep clean, breathable air flowing from a respirator air supply hose to your hood or helmet by replacing worn or damaged breathing tubes. To maintain NIOSH approval, choose a breathing tube that is compatible with your respirator hood series.
Covers (sold separately) extend the life of tubes by protecting them from harsh contaminants, such as paint and chemicals.
Breathing Tubes | Covers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Compatible With | For Use With | Lg. | Retracted Lg. | Extended Lg. | Flexibility | Material | Color | Connection Style | Each | Each | ||
Bullard | |||||||||||||
20BT | Bullard CC20 Series, Bullard GR50 Series, Bullard RT Series | Solid Particles | 35" | __ | __ | Very Flexible | PVC Plastic | White | Clamp On | 00000000 | 000000 | 0000000 | 000000 |
20LFBT | Bullard 20LF Series | Solid Particles | 36" | __ | __ | Very Flexible | PVC Plastic | White | Quick Turn | 00000000 | 00000 | 0000000 | 00000 |
88VXBT | Bullard 88VX Series | Solid Particles | 36" | __ | __ | Very Flexible | PVC Plastic | Black | Quick Turn | 00000000 | 000000 | 000000 | 00 |
3M | |||||||||||||
BT-30 | 3M S-Series, 3M S-Series Premium | Solid Particles | __ | 26" | 33 1/2" | Very Flexible | Vinyl Plastic | Black | Quick Turn | 00000000 | 00000 | 000000 | 00 |
Powered Air-Purifying Respirators


These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications. Made of Tychem 2000 (formerly known as Tychem QC), these hood respirators have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Respirators include a rechargeable lithium ion (Li-Ion) battery that provides approximately four hours of continuous use when fully charged. Respirators have a ratchet suspension that adjusts with an easy-turn knob.
Breathing Tubes for Powered Air-Purifying Respirators

Replace worn or damaged breathing tubes—these tubes deliver clean, breathable air from the air pump to your hood or helmet. To maintain NIOSH approval, match breathing tubes to the same manufacturer and series as the respirator and corresponding hood or helmet.
Covers (sold separately) extend the life of tubes by protecting them from harsh contaminants, such as paint and chemicals.
Breathing Tubes | Covers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Compatible With | For Use With | Lg. | Retracted Lg. | Extended Lg. | Flexibility | Material | Color | Connection Style | Each | Each | ||
Bullard | |||||||||||||
PA1BT | Bullard CC20 Series, Bullard GR50 Series, Bullard RT Series | Solid Particles | 26" | __ | __ | Very Flexible | PVC Plastic | White | Clamp On | 0000000 | 000000 | 0000000 | 000000 |
PA20LFBT | Bullard 20LF Series | Solid Particles | 32" | __ | __ | Very Flexible | PVC Plastic | White | Quick Turn | 0000000 | 00000 | 0000000 | 00000 |
PAFLEXBT | Bullard Sightline Series | Solid Particles | __ | 20" | 48" | Very Flexible | PVC Plastic | White | Threaded | 0000000 | 00000 | 0000000 | 00000 |
Harnesses for Powered Air-Purifying Respirators

Make it easier to move and more comfortable to wear your respirator. These harnesses keep the respirator secure, so you can kneel, stand, or sit without it shifting much. Since they spread the weight of the respirator system across your shoulders and hips, the load on your back is reduced. They are especially beneficial when you need to wear your respirator for long shifts.
Material | Closure Type | Color | Clothing Size | Each | |
Vinyl Fabric | Buckle | Black | One Size | 0000000 | 0000000 |
Emergency Respirators

Block out smoke or gas in seconds during emergencies. These respirators come in a pouch, so they’re easy to store and pull out when needed. Simply slip them on—they fit a variety of head sizes. The filter works for 15 minutes, so you have enough time to safely leave your dangerous environment. If it’s dark, dusty, or smoky, their bright yellow color makes you easier to see.
Lens | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Use With | Rated Life | Exhale Valve | Size | Color | Mask Material | Material | Ht. | Wd. | Each | |
Solid Particles, Carbon Monoxide | 15 min. | Yes | One Size | Yellow | PVC Plastic | PET Plastic | 5 1/2" | 6" | 0000000 | 0000000 |
Cold-Protection Face Masks

These face masks protect your head and neck from the cold. They are made of cotton and have a water-resistant shell and a detachable quilted face piece for added versatility.
Material | Color | Size | Each | |
Cotton Fabric | Dark Blue | One Size | 00000000 | 000000 |
Flame- and Arc-Flash Cold-Protection Face Masks

These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.
Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
Aramid/Lyocell Fabric Blend | 10 | 2 | NFPA 70E | White | One Size | 00000000 | 000000 |
Clean Room Hoods

Prevent dust, microbes and other pollutants from contaminating a clean room. When laundered to clean room standards, these hoods can be reused up to 100 times. Wash them prior to first use and after each use.
All hoods are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both standards, clean rooms with lower class ratings have fewer contaminants.
Polyester hoods withstand liquid splashes and abrasion.
Shop Hoods


These hoods protect against paint and dust. Wear with protective eyewear.
Style A are also known as paint spray hoods. The interior is large enough to wear a respirator under the hood. These hoods are made of lightweight, breathable cotton with a polycarbonate lens.
Style B are often worn during abrasive blasting and grinding jobs. They are made of durable cotton duck fabric with an acrylic lens that is reinforced with a mesh screen. An internal bump cap protects your head against impact from flying debris. Mesh vents on the sides and back provide some breathability.
Aluminized Hoods for Heat Protection

Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.
Hoods | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lens | Replacement Face Shields | ||||||||||
Material | Size | Color | Lg. | Color | Material | Ht. | Wd. | Each | Each | ||
Rayon Fabric | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 0000000 | 0000000 | 000000 |
Kevlar/Nomex Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 0000000 | 000000 | 0000000 | 00000 |
PBI/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
Carbon/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
Arc-Flash-Protection Hoods

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.
Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).