McMaster-Carr logo
    Filter by
    Outlet Diameter
    Electrical Phase
    Mounting Location
    Electrical Connection Type
    Housing Material
    Outlet Shape
    Electrical Connection
    Power Source
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Floor-Mount Fume Exhausters

    Image of Product. Front orientation. Fume Exhausters. Floor-Mount Fume Exhausters, Galvanized Steel.
    Image of Product. Front orientation. Fume Exhausters. Floor-Mount Fume Exhausters, Black Powder-Coated Steel.
    Image of Product. Front orientation. Fume Exhausters. Floor-Mount Fume Exhausters, Aluminum.

    Galvanized Steel

    Black Powder-Coated Steel

    Aluminum

    Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.
    Open Dripproof (ODP) Motor Enclosure—Use open dripproof exhausters in relatively clean, dry, well-ventilated indoor locations.
    Totally Enclosed Motor Enclosure—Totally enclosed exhausters have an external fan for cooling. These exhausters offer more protection than open dripproof exhausters. They can be used in dirty, dusty, and damp environments, but are not airtight.
    Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Power,
    hp
    Inlet
    Dia.
    Outlet
    Dia.
    Ht.
    Wd.
    Dp.
    Housing Material
    Base
    Material
    Wheel
    Material
    Fasteners
    Included
    For Screw
    Size
    Hole
    Dia.
    No. of
    Holes
    Each
    Open Dripproof (ODP) Motor Enclosure
     
    120V AC, Single Phase—Hardwire
    800 ft³/min @ 1/2 in. H₂O65 dBC @ 15 ft.1/36"6"15 1/8"16"20 3/8"Galvanized SteelSteelSteelNo1/4"
    		9/32"40000000000000
     
    Totally Enclosed Motor Enclosure
     
    120V AC, Single Phase—Plug In
    755 ft³/min @ 1/2 in. H₂O72 dBA @ 15 ft.3/46"5"20 1/4"17"15 3/4"Black Powder-Coated SteelSteelAluminum
    		No3/8"
    		7/16"40000000000000000
     
    120V AC/230V AC, Single Phase—Hardwire
    1,045 ft³/min @ 1/2 in. H₂O75 dBA @ 15 ft.1 1/26"6"16 3/8"12 1/4"18"Aluminum
    		SteelSteelNo3/8"
    		7/16"40000000000000000
     
    230V AC, Single Phase—Hardwire
    1,135 ft³/min @ 1/2 in. H₂O78 dBA @ 15 ft.36"6"22 7/8"19 1/8"18 1/4"Black Powder-Coated SteelSteelAluminum
    		No3/8"
    		7/16"40000000000000000
     
    230V AC/460V AC, Three Phase—Hardwire
    450 ft³/min @ 1/2 in. H₂O64 dBA @ 15 ft.1/46"6"16 3/8"12 1/4"15 1/4"Aluminum
    		SteelSteelNo3/8"
    		7/16"40000000000000000
    855 ft³/min @ 1/2 in. H₂O74 dBA @ 15 ft.1 1/26"6"22 7/8"19 1/8"17 1/8"Black Powder-Coated SteelSteelAluminum
    		No3/8"
    		7/16"40000000000000000
    1,135 ft³/min @ 1/2 in. H₂O78 dBA @ 15 ft.36"6"22 7/8"19 1/8"19 7/8"Black Powder-Coated SteelSteelAluminum
    		No3/8"
    		7/16"40000000000000000
     
    Duct Kits
    Single-Duct Kits for Exhausters with 6" Inlet Diameter—Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.
    Dual-Duct Kits for Exhausters with 6" Inlet Diameter—Dual-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
    Each
    Single-Duct Kits for Exhausters with 6" Inlet Diameter00000000000000
    Dual-Duct Kits for Exhausters with 6" Inlet Diameter0000000000000

    Portable Fume Exhausters

    Image of Product. Front orientation. Fume Exhausters. Portable Fume Exhausters.
    In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor. They remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments. They have a flexible hose with nozzle to capture fumes at the source and rubber pads on the base to reduce vibration.
    Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Overall
    Nozzle
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Power,
    hp
    Inlet
    Dia.
    Outlet
    Dia.
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Housing
    Material
    Wheel
    Material
    Fasteners
    Included
    For Screw
    Size
    Hole
    Dia.
    No. of
    Holes
    Hose Lg.,
    ft.
    Each
    Totally Enclosed Motor Enclosure
     
    120V AC, Single Phase—Plug In
    310 ft³/min @ 1/4 in. H₂O
    335 ft³/min @ 0 in. H₂O    		59 dBA @ 15 ft.1/46"6"17 7/8"13 3/4"18 1/4"8"8"Aluminum
    		SteelNo3/8"
    		7/16"4100000000000000000
    575 ft³/min @ 1 1/2 in. H₂O
    655 ft³/min @ 1/4 in. H₂O
    670 ft³/min @ 0 in. H₂O    		59 dBA @ 15 ft.16"6"17 7/8"13 3/4"18 1/4"8"8"Aluminum
    		SteelNo3/8"
    		7/16"410000000000000000
     
    120V AC/230V AC, Single Phase—Hardwire
    730 ft³/min @ 1 1/2 in. H₂O
    795 ft³/min @ 1/4 in. H₂O
    810 ft³/min @ 0 in. H₂O    		73 dBA @ 15 ft.1 1/26"6"21 3/8"21 1/2"16 1/2"8"8"SteelAluminum
    		No3/8"
    		7/16"410000000000000000
     
    230V AC/460V AC, Three Phase—Hardwire
    575 ft³/min @ 1 1/2 in. H₂O
    655 ft³/min @ 1/4 in. H₂O
    670 ft³/min @ 0 in. H₂O    		59 dBA @ 15 ft.16"6"17 7/8"13 3/4"18 1/4"8"8"Aluminum
    		SteelNo3/8"
    		7/16"410000000000000000
    730 ft³/min @ 1 1/2 in. H₂O
    795 ft³/min @ 1/4 in. H₂O
    810 ft³/min @ 0 in. H₂O    		73 dBA @ 15 ft.1 1/26"6"21 3/8"21 1/2"16 1/2"8"8"SteelAluminum
    		No3/8"
    		7/16"410000000000000000
     
    Duct Kits
    Single-Duct Kits for Exhausters with 6" Inlet Diameter—Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.
    Dual-Duct Kits for Exhausters with 6" Inlet Diameter—Dual-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
    Each
    Single-Duct Kits for Exhausters with 6" Inlet Diameter00000000000000
    Dual-Duct Kits for Exhausters with 6" Inlet Diameter0000000000000

    Floor-Mount Hazardous-Location Fume Exhausters

    Image of Product. Front orientation. Fume Exhausters. Floor-Mount Hazardous-Location Fume Exhausters.
    This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space. It is commonly used in welding, soldering, and other operations that create fumes.
    Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Power,
    hp
    Inlet
    Dia.
    Outlet
    Dia.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Base
    Material
    Wheel
    Material
    Fasteners
    Included
    For Screw
    Size
    Hole
    Dia.
    No. of
    Holes
    Hazardous Location Rating
    Each
     
    120V AC—Hardwire
    800 ft³/min @ 1/2 in. H₂O65 dBC @ 15 ft.1/36"6"15 1/8"18 1/4"20 3/8"Galvanized SteelSteelAluminum
    		No1/4"
    		9/32"4NEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups E, F, G
    		000000000000000
     

    High-Output Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Blowers, Round Outlet.
    Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and wet environments.
    Blowers
    Replacement
    Wheels
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    515 ft³/min @ 5 in. H₂O
    680 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,45015 15/16"6"11"21 1/8"19 1/8"17 1/8"8310.1 amp/5.1 amp-10 to 150SteelNo7/16"000000000000000000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    515 ft³/min @ 5 in. H₂O
    680 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,45016"6"11"21 1/8"19 1/8"18 1/4"622.8 amp/1.4 amp-10 to 150SteelNo7/16"0000000000000000000000000000
     
    With Rectangular Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Blowers, Rectangular Outlet.
    Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and wet environments.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		65 dBA @ 15 ft.3,4503/45 5/8"3 5/8"6"9"17 3/4"15 3/8"14 5/8"409.6 amp/4.8 amp-15 to 180SteelNo1/2"00000000000000000000000000000000
     
    120V AC/208V AC to 230V AC
     
    Single Phase—Hardwire
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,55015 5/8"3 5/8"6"10"17 3/4"15 3/8"14 5/8"6410.1 amp/5.64 amp-15 to 180SteelNo1/2"000000000000000000000000000000
     
    208V AC to 230V AC/460V AC
     
    Three Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		65 dBA @ 15 ft.3,4503/45 5/8"3 5/8"6"9"17 3/4"15 3/8"14 5/8"392.5 amp/1.13 amp-15 to 180SteelNo1/2"000000000000000000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,55015 5/8"3 5/8"6"10"17 3/4"15 3/8"14 5/8"643.0 amp/1.5 amp-15 to 180SteelNo1/2"000000000000000000000000000000
     
    With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Blowers, Rectangular Outlet.
    Blowers with an open dripproof motor enclosure are for relatively clean, dry, indoor locations.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		65 dBA @ 15 ft.3,4503/45 5/8"3 5/8"6"9"17 3/4"15 3/8"14 5/8"369.4 amp/4.7 amp-15 to 180SteelNo1/2"00000000000000000000000000000000
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,4501 1/25 5/8"3 5/8"6"10"17 3/4"15 3/8"14 5/8"5917.8 amp/8.9 amp-15 to 180SteelNo1/2"000000000000000000000000000000
     

    High-Output Hazardous Location Spark-Resistant Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle. They have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet
    Image of Product. Front orientation. Blowers. High-Output Hazardous Location Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Hazardous Location Rating
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    460 ft³/min @ 5 in. H₂O
    520 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,45015"6"9 3/4"18"14 1/2"16 1/8"8012.0 amp/6.0 amp0 to 100AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups E, F, G
    		No7/16"0000000000000000
    530 ft³/min @ 5 in. H₂O
    685 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,4501 1/25"6"10 5/8"18"14 1/2"16 1/8"8815.0 amp/7.5 amp0 to 100AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups E, F, G
    		No7/16"000000000000000
    850 ft³/min @ 3 in. H₂O76 dBA @ 15 ft.3,45025"6"12"18 1/4"17 5/16"17 7/16"9620.0 amp/10.0 amp-10 to 150AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups F, G
    		No7/16"0000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    460 ft³/min @ 5 in. H₂O
    520 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,45015"6"9 3/4"18"14 1/2"16 1/8"653.6 amp/1.8 amp0 to 100AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups E, F, G
    		No7/16"000000000000000
    530 ft³/min @ 5 in. H₂O
    685 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,4501 1/25"6"10 5/8"18"14 1/2"16 1/8"733.8 amp/1.9 amp0 to 100AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups E, F, G
    		No7/16"000000000000000
    850 ft³/min @ 3 in. H₂O76 dBA @ 15 ft.3,45025"6"12"19 11/16"17 5/16"17 7/16"1262.3 amp/1.2 amp-10 to 150AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups F, G
    		No7/16"0000000000000000
     

    Spark-Resistant Blowers

    These blowers have an aluminum housing for spark resistance. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    295 ft³/min @ 1 in. H₂O
    505 ft³/min @ 1/4 in. H₂O    		55 dBA @ 15 ft.1,7501/46"6"6 1/4"14 1/8"12 1/4"13 1/4"5.0 amp/2.5 amp0 to 150AluminumNo7/16"00000000000000
    995 ft³/min @ 1 in. H₂O
    1,070 ft³/min @ 1/4 in. H₂O    		70 dBA @ 15 ft.3,4501 1/26"6"6 1/4"14 1/8"12 1/4"13 1/4"13.2 amp/7.3 amp0 to 150AluminumNo7/16"000000000000000
     

    Chemical-Resistant Blowers

    For resistance to chemicals as well as corrosion, these blowers have a plastic housing. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. Chemical-Resistant Blowers, Round Outlet.
    Image of Product. Front orientation. Blower Wheels. Chemical-Resistant Blowers.

    Replacement Wheels

    PVC Housing—PVC housing offers greater chemical resistance than the fiberglass housing. It resists strong oxidizing acids such as sulfuric acid but will not withstand contact with perchloric acid.
    Blowers
    Replacement
    Wheels
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    185 ft³/min @ 1/2 in. H₂ONot Rated1,7251/65"6"5 11/16"12 1/4"11"14 1/2"323.8 amp/1.9 ampPVCNo3/8"0000000000000000000000000000000
     

    Hazardous Location Chemical-Resistant Blowers

    These blowers have an explosion-proof motor that is UL listed and CSA certified for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations. For resistance to chemicals as well as corrosion, they have a plastic housing. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Round Outlet and Round Inlet
    Image of Product. Front orientation. Blowers. Hazardous Location Chemical-Resistant Blowers, Round Outlet.
    Image of Product. Front orientation. Blower Wheels. Hazardous Location Chemical-Resistant Blowers.

    Replacement Wheels

    PVC Housing—PVC housing offers greater chemical resistance than the fiberglass housing. It resists strong oxidizing acids such as sulfuric acid but will not withstand contact with perchloric acid.
    Blowers
    Replacement
    Wheels
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Housing
    Material
    Hazardous Location Rating
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC
     
    Single Phase—Hardwire
    185 ft³/min @ 1/2 in. H₂ONot Rated1,7251/65"6"5 11/16"12 1/4"11"15 1/2"1.9 ampPVCNEC Class I Divisions 1, 2 Group D
    NEC Class II Divisions 1, 2 Groups F, G
    		No3/8"0000000000000000000000000000000
     

    Hazardous Location Spark-Resistant Blowers

    These blowers have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet
    Image of Product. Front orientation. Blowers. Hazardous Location Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Hazardous Location Rating
    Enclosure
    Rating
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    295 ft³/min @ 1 in. H₂O
    505 ft³/min @ 1/4 in. H₂O    		55 dBA @ 15 ft.1,7501/36"6"6 1/4"14 1/8"12 1/4"13 1/4"6.0 amp/3.0 amp0 to 150AluminumNEC Class I Divisions 1, 2 Group D
    NEC Class II Divisions 1, 2 Groups F, G
    		IP44
    		No7/16"0000000000000000
    995 ft³/min @ 1 in. H₂O
    1,070 ft³/min @ 1/4 in. H₂O    		70 dBA @ 15 ft.3,4501 1/26"6"6 1/4"14 1/8"12 1/4"13 1/4"15.4 amp/8.4 amp0 to 150AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups F, G
    		IP54
    		No7/16"000000000000000
     

    Blowers

    These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Blowers. Blowers.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC
     
    Single Phase—Hardwire
    305 ft³/min @ 3/4 in. H₂O
    520 ft³/min @ 1/4 in. H₂O    		48 dB @ 15 ft.1,7251/47 1/4"4 1/4"6"6"14"10 1/4"13 3/4"282.6 amp/1.3 amp-4 to 180SteelNo3/8"00000000000000000000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    305 ft³/min @ 3/4 in. H₂O
    520 ft³/min @ 1/4 in. H₂O    		48 dB @ 15 ft.1,7251/47 1/4"4 1/4"6"6"14"10 1/4"13 3/4"341 amp/0.5 amp-4 to 180SteelNo3/8"000000000000000000000000000000
     

    High-Output Spark-Resistant Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle. They have an aluminum housing for spark resistance. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    460 ft³/min @ 5 in. H₂O
    520 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,45015"6"9 3/4"18"14 1/2"16 1/8"7013.6 amp/6.8 amp0 to 100AluminumNo7/16"0000000000000000
    530 ft³/min @ 5 in. H₂O
    685 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,4501 1/25"6"10 5/8"18"14 1/2"16 1/8"5517.8 amp/8.9 amp0 to 100AluminumNo7/16"000000000000000
    750 ft³/min @ 5 in. H₂O
    850 ft³/min @ 3 in. H₂O    		76 dBA @ 15 ft.3,45025"6"12"18 1/4"17 5/16"17 5/16"9617.5 amp/8.7 amp-10 to 150AluminumNo7/16"000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    460 ft³/min @ 5 in. H₂O
    520 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,45015"6"9 3/4"18"14 1/2"16 1/8"653.1 amp/1.6 amp0 to 100AluminumNo7/16"000000000000000
    530 ft³/min @ 5 in. H₂O
    685 ft³/min @ 3 in. H₂O    		80 dBA @ 15 ft.3,4501 1/25"6"10 5/8"18"14 1/2"16 1/8"734.2 amp/2.1 amp0 to 100AluminumNo7/16"000000000000000
    750 ft³/min @ 5 in. H₂O
    850 ft³/min @ 3 in. H₂O    		76 dBA @ 15 ft.3,45025"6"12"18 1/4"17 5/16"17 5/16"884.9 amp/2.4 amp-10 to 150AluminumNo7/16"000000000000000
     
    back to top