We will reply to your message within an hour.
More
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
Form elbows and bends with this hose and it will hold its shape without support.
Let go of this hose and it will spring back out of your way.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
If you’re tight on storage space, this hose compresses down to a small size.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
Transfer material from sifters, feeders, and strainers to other parts of your sanitary line with these hose lengths and fittings.
Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.
The arm length adjusts from 3 to 6 feet making these exhaust hoses good for locations with low ceilings.
For exact positioning, these hoses swivel 360°.
Move the hose into position and the support arm will hold it in place.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.