Filter by
ID
Fitting Connection
OD
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Duct Type
Overall Width
Overall Height
Width
Airflow Dampers
The simplest, most reliable way to regulate airflow in standard duct. Turn the lever to adjust the blade.
Gasketed Airflow Damper—The blade has a rubber gasket to prevent leaks better than other dampers.
Blade Airflow Damper—The most economical choice, these dampers slide into the end of duct. Drill a hole for the damper's bolt and remove the handle. Place the damper inside duct, insert the bolt through the hole, and reattach the handle.
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
Galvanized Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Duct Size | Dia. | OD | Overall Lg. | Ga. | Gasket Material | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Standard Airflow Damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Male | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | — | 3 3/4" | 4 1/2" | 20 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | — | 4 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | — | 5 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | — | 6 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | — | 7 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9 | — | 8 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | — | 9 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | — | 11 3/4" | 4 1/2" | 20 | — | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14 | — | 13 3/4" | 4 1/2" | 20 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | — | 15 3/4" | 4 1/2" | 20 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | — | 17 3/4" | 4 1/2" | 20 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | — | 19 3/4" | 4 1/2" | 18 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
22 | — | 21 3/4" | 4 1/2" | 18 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
24 | — | 23 3/4" | 4 1/2" | 18 | — | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Gasketed Airflow Damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Male | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | — | 3 7/8" | 10" | 20 | Neoprene | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | — | 5 7/8" | 10" | 20 | Neoprene | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | — | 7 7/8" | 10" | 20 | Neoprene | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | — | 9 7/8" | 10" | 20 | Neoprene | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | — | 11 7/8" | 10" | 20 | Neoprene | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Blade Airflow Damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | 4" | — | — | 28 | — | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | 5" | — | — | 28 | — | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | 6" | — | — | 28 | — | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | 7" | — | — | 28 | — | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | 8" | — | — | 28 | — | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9 | 9" | — | — | 26 | — | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | 10" | — | — | 26 | — | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 12" | — | — | 26 | — | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14 | 14" | — | — | 24 | — | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Duct Damper Handles
![]() |
Pair with your own blade to create an economical damper for existing duct. These handles work with blades up to 0.022" thick to regulate airflow.
Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
Galvanized Steel | |||
---|---|---|---|
For Max. Damper Blade Thk. | Each | ||
0.022" | 0000000 | 00000 |
Airflow Dampers for Square Duct
![]() |
Direct airflow to different zones in your facility or regulate the amount of outside air introduced to your system. Turn the lever on these dampers to adjust the blades.
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
For Duct | Overall | Galvanized Steel | |||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Dp. | Ga. | Gasket Material | Each | ||
12" | 12" | 11 3/4" | 11 3/4" | 5 1/2" | 16 | Vinyl Plastic | 0000000 | 0000000 | |
14" | 14" | 13 3/4" | 13 3/4" | 5 1/2" | 16 | Vinyl Plastic | 0000000 | 000000 | |
16" | 16" | 15 3/4" | 15 3/4" | 5 1/2" | 16 | Vinyl Plastic | 0000000 | 000000 | |
24" | 24" | 23 3/4" | 23 3/4" | 5 1/2" | 16 | Vinyl Plastic | 0000000 | 000000 | |
36" | 36" | 35 3/4" | 35 3/4" | 5 1/2" | 16 | Vinyl Plastic | 0000000 | 000000 |
Automatic Airflow Dampers
![]() |
Keep temperatures comfortable while saving energy. Control these dampers with a switch or thermostat so you’re only heating and cooling the areas that need it.
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
Overall | Galvanized Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Duct Size | ID | OD | Ht. | Wd. | Electrical Connection Type | Voltage, V AC | Ga. | Each | ||
5 | 5" | 4 7/8" | 9 1/4" | 7" | Hardwire | 24 | 24 | 0000000 | 0000000 | |
6 | 6" | 5 7/8" | 10 1/4" | 8" | Hardwire | 24 | 24 | 0000000 | 000000 | |
8 | 8" | 7 7/8" | 12 1/4" | 10" | Hardwire | 24 | 24 | 0000000 | 000000 | |
10 | 10" | 9 7/8" | 14 1/4" | 12" | Hardwire | 24 | 24 | 0000000 | 000000 | |
12 | 12" | 11 7/8" | 16 1/4" | 14" | Hardwire | 24 | 24 | 0000000 | 000000 | |
14 | 14" | 13 7/8" | 18 1/4" | 16" | Hardwire | 24 | 22 | 0000000 | 000000 | |
16 | 16" | 15 7/8" | 20 1/4" | 18" | Hardwire | 24 | 22 | 0000000 | 000000 | |
18 | 18" | 17 7/8" | 22 1/4" | 20" | Hardwire | 24 | 22 | 0000000 | 000000 |
Airflow Dampers for Quick-Disconnect Duct
![]() |
Regulate airflow to sections of quick-disconnect duct. Often used in dust collection systems, these dampers attach with quick-release clamps. Turn the lever to adjust airflow.
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
Galvanized Steel | ||||||
---|---|---|---|---|---|---|
Duct Size | ID | Overall Lg. | Ga. | Each | ||
3 | 3 3/16" | 8" | 22 | 00000000 | 000000 | |
4 | 3 15/16" | 8" | 22 | 00000000 | 00000 | |
5 | 4 15/16" | 8" | 22 | 00000000 | 00000 | |
6 | 6" | 8" | 22 | 00000000 | 00000 | |
7 | 7" | 8" | 22 | 00000000 | 00000 | |
8 | 8" | 13" | 22 | 00000000 | 00000 | |
9 | 9" | 13" | 22 | 00000000 | 00000 | |
10 | 10" | 13" | 22 | 00000000 | 00000 | |
12 | 12 1/8" | 13" | 20 | 00000000 | 00000 | |
14 | 14 1/8" | 17" | 20 | 00000000 | 00000 | |
16 | 16 1/8" | 17" | 20 | 00000000 | 000000 | |
18 | 18 1/8" | 23" | 20 | 00000000 | 000000 | |
20 | 20 1/8" | 23" | 20 | 00000000 | 000000 | |
22 | 22 1/8" | 23" | 20 | 00000000 | 000000 | |
24 | 24 1/16" | 23" | 20 | 00000000 | 000000 |
Tight-Seal Spiral Duct and Fittings
![]() |
Gasketed fittings prevent leaks between connections without the need for tape or other sealants. Duct has a continuous seam that reinforces it for strength and long life. The rigid construction keeps its shape, even against suction from dust collectors. Duct is smooth on the inside for efficient airflow. Because of its attractive look, spiral duct is often used for exposed heating and cooling systems.
Straight Collars with Airflow Damper
![]() |
Add a branch of round duct from rectangular systems and control airflow with the damper. Cut a hole, install the collar, and connect a piece of tight-seal spiral round duct.
Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.
Polyethylene Foam Gasket—The flange has an adhesive-backed gasket to bond the connection until you fasten with screws. The gasket also prevents leaks.
Galvanized Steel with EPDM Gasket | ||||||
---|---|---|---|---|---|---|
Duct Size | OD | Bottom Gasket Material | Ga. | Each | ||
6 | 5 7/8" | Polyethylene Foam | 24 | 00000000 | 000000 | |
8 | 7 7/8" | Polyethylene Foam | 24 | 00000000 | 00000 | |
10 | 9 7/8" | Polyethylene Foam | 24 | 00000000 | 00000 | |
12 | 11 7/8" | Polyethylene Foam | 24 | 00000000 | 00000 | |
14 | 13 7/8" | Polyethylene Foam | 24 | 00000000 | 00000 | |
16 | 15 7/8" | Polyethylene Foam | 24 | 00000000 | 00000 |
Duct Fire Dampers
In case of a fire, these dampers shut automatically to stop airflow. They have a fusible link that melts at 165° F, releasing a spring to close the blade. Dampers meet UL 555 fire safety standards to help prevent the spread of fire for 11/2 hours. They are undersized to fit inside duct.
For Round Duct
![]() |
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
Overall | Galvanized Steel | ||||||||
---|---|---|---|---|---|---|---|---|---|
Duct Size | OD | Ht. | Wd. | Fire Safety Std. | Fusible Link Melting Temp., ° F | Ga. | Each | ||
4 | 3 3/4" | 6 3/4" | 6 3/4" | UL 555 | 165 | 22 | 00000000 | 0000000 | |
6 | 5 3/4" | 8 3/4" | 8 3/4" | UL 555 | 165 | 22 | 00000000 | 000000 | |
8 | 7 3/4" | 10 3/4" | 10 3/4" | UL 555 | 165 | 22 | 00000000 | 000000 | |
10 | 9 3/4" | 12 3/4" | 12 3/4" | UL 555 | 165 | 22 | 00000000 | 000000 | |
12 | 11 3/4" | 14 3/4" | 14 3/4" | UL 555 | 165 | 22 | 00000000 | 000000 |
For Square Duct
![]() |
Galvanized Steel—Strong and corrosion resistant, galvanized steel is the most commonly used ductwork material.
For Duct | Overall | Galvanized Steel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Dp. | Fire Safety Std. | Fusible Link Melting Temp., ° F | Ga. | Each | ||
8" | 8" | 7 3/4" | 7 3/4" | 4 7/8" | UL 555 | 165 | 22 | 0000000 | 000000 | |
12" | 12" | 11 3/4" | 11 3/4" | 4 7/8" | UL 555 | 165 | 22 | 0000000 | 00000 | |
14" | 14" | 13 3/4" | 13 3/4" | 4 7/8" | UL 555 | 165 | 22 | 0000000 | 00000 | |
18" | 18" | 17 3/4" | 17 3/4" | 4 7/8" | UL 555 | 165 | 22 | 0000000 | 000000 | |
24" | 24" | 23 3/4" | 23 3/4" | 4 7/8" | UL 555 | 165 | 22 | 0000000 | 000000 |