Collect, transport, and store gas and liquid samples without worrying about evaporation or leaks. These syringes have a locking valve that keeps your sample secure. They also have a piston that creates a leak-free, gastight seal against the barrel.

With a glass barrel, these syringes have a long lifespan and aren’t likely to wear or warp from your samples. They have a tighter tolerance than syringes with plastic barrels, so they’re better at controlling small, precise flows. They’ll dispense all material inside with nothing left over—the needle sits exactly at the zero graduation mark, and the piston’s seal against the barrel wipes off any deposits from liquids. With no deposits, the plunger won’t get stuck while dispensing. The piston’s seal is also tight enough that the plunger won’t retract on its own, so you can dispense from these syringes in a slow, controlled manner. Thanks to their precision, these syringes are often used for gas chromatography.

To attach the needle, slide it in at the base of these syringes and secure it with its locking nut. Made of stainless steel, the needle has a smooth surface that limits friction. It’s also sharp and beveled so it can be inserted without clogging or leaving a hole. This makes it ideal for puncturing septa lids.

A turn of the threaded plunger dispenses extremely small quantities—as small as a speck of dust. The fine threads on these syringes inch the plunger forward with every turn for a controlled, precise flow. You won’t accidentally push too much out with these syringes.

A glass barrel adds to their precision. It’s made to a tighter tolerance than a plastic barrel, so the plunger seals against the barrel and wipes it clean as it moves, dispensing every last drop. The glass barrel is also durable and resistant to chemicals, so it’s unlikely to wear or warp from your sample for a long, reliable life. Thanks to their precision, these syringes are often used for gas chromatography.

Attach a needle with a luer slip connection. Slide a needle onto the fitting and friction will hold it in place.

Before autoclaving these syringes, disassemble them. Keep in mind that autoclaving can reduce their lifespan, so chemical sterilization is preferred.