About Foam
More
About Rubber
More
EMI/RFI Shielding Gaskets for Data Connectors
Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems. They block electromagnetic interference (EMI) and radio frequency interference (RFI), which cause flickering displays and inaccurate readings.
Silicone gaskets are good for high temperature and wet environments because they seal out moisture. Most are sized to fit specific mil. spec. connector shell sizes.
Interference reduction at frequency, also known as attenuation, describes how much EMI and RFI is blocked. These gaskets block most interference; use them for general purpose shielding as well as protecting sensitive or precision components.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Connector Shell Size | ID | Length | Width | Thickness | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Color | For Use Outdoors | Diameter | Number of | Specifications Met | Each | |
Silicone Rubber | ||||||||||||||
15, 16 | 1 1/8" | 1 1/4" | 1 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 000000 |
16 | 1 1/16" | 1 1/4" | 1 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
High-Temperature Slotted Rope Edge Seals
Made of fiberglass, these seals are woven tighter than High-Temperature Ultra-Conformable Slotted Edge Seals for increased durability. Also known as drop-warp and bolt-hole tape, they have openings along the center to accommodate bolts and rivets. Use them on metal flanges, as well as on oven, furnace, and boiler doors. They resist grease, oil, hydraulic fluid, and solvents.
High-Temperature Rope Edge Seals
A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals. They’re flexible and will conform to uneven surfaces. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks. They resist bleach, solvents, and most acids (do not use with hydrofluoric acid, hot phosphoric acid, and wet hydrogen chloride).
High-Temperature Ultra-Conformable Rope Edge Seals
These loosely knitted fiberglass seals are more flexible, compressible, and conformable than High-Temperature Rope Edge Seals. The looser construction also makes them more likely to absorb liquids. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks. They resist bleach, solvents, and most acids (do not use with hydrofluoric acid, hot phosphoric acid, and wet hydrogen chloride).
Square-Profile Ultra High-Temperature Rope Edge Seals
The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica for excellent temperature resistance. They’re flexible and will conform to uneven surfaces. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks. They resist water, salts, and diluted acids.
Light Duty Blended EPDM Foam Sheets and Strips
EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear. This foam has closed-cell construction, which restricts water, air, and gases from being absorbed.
For technical drawings and 3-D models, click on a part number.
- Color: Black
- Temperature Range: -40° to 250° F
- Cell Type: Closed
- For Use Outdoors: No
- Density: Extra Soft: 6 lbs./cu. ft.; Soft: 9 lbs./cu. ft.
- Pressure to Compress 25%: Extra Soft: 7 psi; Soft: 9 psi
- Tensile Strength Rating: Not Rated
- Oil-Resistance Rating: Not Rated
Adhesive | |||||||
---|---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Lg., ft. | Type | Temperature Range, °F | Specifications Met | Each | |
Extra Soft | |||||||
1 1/4" Wd. | |||||||
1/16" | -0.031" to 0.031" | 50 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 000000 |
1/8" | -0.031" to 0.031" | 50 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
3/16" | -0.031" to 0.031" | 50 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
1/4" | -0.031" to 0.031" | 50 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
3/8" | -0.045" to 0.045" | 25 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
1/2" | -0.045" to 0.045" | 25 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
3/4" | -0.063" to 0.063" | 25 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
1" | -0.094" to 0.094" | 25 | Rubber | 0° to 140° | ASTM D1056 2C2, UL 94 HF-1 | 00000000 | 00000 |
Multipurpose Neoprene Foam Sheets and Strips
In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.
Closed-cell foam restricts water, air, and gases from being absorbed.
For technical drawings and 3-D models, click on a part number.
- Color: Black
- Temperature Range: -70° to 200° F
- Cell Type: Closed
- For Use Outdoors: Yes
- Density: Ultra Soft: 10 lbs./cu. ft.; Soft: 15 lbs./cu. ft.
- Pressure to Compress 25%: Ultra Soft: 3 psi; Soft: 12 psi
- Tensile Strength Rating: Ultra Soft: Fair; Soft: Good
- Oil-Resistance Rating: Good
Adhesive | ||||||
---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Lg., ft. | Type | Temperature Range, °F | Each | |
Soft | ||||||
1 1/4" Wd. | ||||||
1/16" | -0.030" to 0.020" | 10 | Acrylic | -20° to 200° | 000000000 | 000000 |
1/8" | -0.040" to 0.025" | 10 | Acrylic | -20° to 200° | 000000000 | 00000 |
1/4" | -0.040" to 0.025" | 10 | Acrylic | -20° to 200° | 000000000 | 00000 |
3/8" | -0.060" to 0.040" | 10 | Acrylic | -20° to 200° | 000000000 | 00000 |
1/2" | -0.065" to 0.045" | 10 | Acrylic | -20° to 200° | 000000000 | 00000 |
3/4" | -0.125" to 0.065" | 3 | Acrylic | -20° to 200° | 000000000 | 00000 |
1" | -0.165" to 0.087" | 3 | Acrylic | -20° to 200° | 000000000 | 00000 |
Ultra-Conformable Light Duty Vinyl Foam Sheets and Strips
These vinyl foam sheets and strips are so conformable that once they’re compressed they won’t fully spring back. Use them to fill gaps and seal uneven surfaces. They offer excellent resistance to water, sunlight, and oxidation. This foam has closed-cell construction, which restricts water, air, and gases from being absorbed.
Foam with ultra-smooth texture has a sleek surface that's easy to wipe down.
For technical drawings and 3-D models, click on a part number.
- Color: Gray or Black
- Temperature Range: -30° to 140° F
- Cell Type: Closed
- For Use Outdoors: Yes
- Density: Gray: 7 lbs./cu. ft.; Black: 12 lbs./cu. ft.
- Pressure to Compress 25%: See table
- Tensile Strength Rating: Not Rated
- Oil-Resistance Rating: Not Rated
Adhesive | Gray | ||||||
---|---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Lg., ft. | Type | Temperature Range, °F | Pressure to Compress 25% | Each | |
1 1/4" Wd. | |||||||
3/16" | -0.038" to 0.038" | 25 | Acrylic | 0° to 170° | 2.5 psi (Ultra Soft) | 00000000 | 000000 |
Super-Cushioning Polyurethane Foam Sheets, Bars, Cubes, and Strips
Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support. Use these sheets, bars, cubes, and strips in packaging applications to absorb shock and damp vibration. Foam has open-cell construction, which allows water, air, and gases to be absorbed.
For technical drawings and 3-D models, click on a part number.
- Color: Gray
- Temperature Range: -20° to 180° F
- Cell Type: Open
- For Use Outdoors: No
- Density: 1 lbs./cu. ft.
- Pressure to Compress 25%: 0.3 psi (Ultra Soft)
- Tensile Strength Rating: Fair
- Oil-Resistance Rating: Not Rated
Thick. | Thick. Tolerance | Wd. | Lg. | Each | |
1 1/4" | -0.063" to 0.063" | 1 1/4" | 42" | 00000000 | 00000 |
Multipurpose Neoprene Rubber Tubes
Jackets, seals, and insulation are just a few of the many uses for rubber tubes. Neoprene is also called chloroprene.
For technical drawings and 3-D models, click on a part number.
Oil-Resistant Buna-N Rubber Sheets, Bars, and Strips
Buna-N rubber is also known as nitrile, NBR, and acrylonitrile butadiene. It resists fuel oil, hydraulic oil, ethylene glycol, and grease.
For technical drawings and 3-D models, click on a part number.
Oil-Resistant Buna-N Rubber Tubes
Applications for these tubes include jackets, seals, and insulation. Buna-N is also known as nitrile, NBR, and acrylonitrile butadiene. It resists fuel oil, hydraulic oil, ethylene glycol, and grease.
For technical drawings and 3-D models, click on a part number.