Made from a blend of aramid fiber and Buna-N rubber.

Damp vibration when sealing in moist environments with this EPDM gasket material.

This paper-thin material is commonly used for light-duty gasketing.

This material withstands temperatures up to 850° F and pressure up to 2,000 psi.

Made of FDA-listed material for use with food and beverage.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Silicone maintains its flexibility across a wide range of temperatures.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

Made of solid silicone foam rubber, these seals also resist water and salts.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

These hollow seals offer better compressibility than solid seals.

Made of Viton® fluoroelastomer rubber, these seals stand up to fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

Made of 96% silica, these seals resist temperatures up to 1800° F.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These resist grease, hydraulic oils, and motor oil.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These O-rings withstand temperatures up to 450° F.

Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.

Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.

Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners.

These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.

Offering excellent flexibility, these seals are made of expanded graphite yarn. Use them for steam applications in pumps and valves.

Use these graphite-impregnated graphite seals for steam applications in pumps and valves.

Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.

Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.