Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Slide the bolt and drop the knob into the notch to secure.

The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

To prevent tampering, the mounting screws on these latches are concealed.

These padlockable latches are reversible for right- and left-hand mounting.

Choose these locks if you need locks that each open with a different key.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

These latches are reversible for right- and left-hand mounting.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.

Secure swinging doors in wire and chain link partitions.

Push to close and pull up on the latch arm to open these padlockable latches.