About Pipe Size
More
About Pressure Gauges
More
About Gas Regulators
More
Gas Pressure Gauges
Use these gauges with pumps, filters, regulators, and in process lines to monitor the pressure of compressed gas. Mount them with the dial face upright. Gauges for use with acetylene can also be used in welding applications.
Gauges with brass case are cleaned to meet ASME B40.1, Level IV for oxygen service.
- For Use With: Air, Acetylene, Carbon Dioxide, and Oxygen
- Accuracy: ±2% Mid Scale (Grade B)
Available Pressure Ranges | ||
|---|---|---|
| Pressure Range, psi | Graduation Marks, psi | Numeric Increments, psi |
| 0 to 30 | 1 | 5 |
| 0 to 60 | 1 | 10 |
| 0 to 100 | 2 | 20 |
| 0 to 200 | 5 | 40 |
| 0 to 400 | 10 | 50 |
| 0 to 600 | 10 | 100 |
| 0 to 1,000 | 20 | 200 |
| 0 to 2,000 | 50 | 400 |
| 0 to 3,000 | 50 | 500 |
| 0 to 4,000 | 100 | 500 |
Low-Pressure Differential Gauges with Color Indicator
A band of green, yellow, and red provides a clear indication of changes in differential pressure. Gauges are commonly used to indicate clogged filters.
- For Use With: Air, Water, Hydraulic Fluid, Carbon Dioxide, Nitrogen, Hydrogen, Argon, and Acetylene
- Accuracy: ±5% Full Scale (Not Graded)
Pressure Range, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Green Band | Yellow Band | Red Band | Max. Pressure, psi | Environment Temp. Range, °F | Process Temp. Range, °F | Ht. | Wd. | Dp. | Case Color | Each | |
NPT Female | ||||||||||||
| 1/4 | 0-2 | 2-2.5 | 2.5-3.5 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 0000000 |
| 1/4 | 0-3 | 3-4.5 | 4.5-5 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 000000 |
| 1/4 | 0-6 | 6-9 | 9-12 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 000000 |
| 1/4 | 0-7.5 | 7.5-12 | 12-15 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 000000 |
| 1/4 | 0-13 | 13-20 | 20-30 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 000000 |
| 1/4 | 0-19.5 | 19.5-29.5 | 29.5-43 | 300 | -40° to 200° | -40° to 200° | 3 1/4" | 3 1/4" | 1 1/2" | Black | 0000000 | 000000 |
Low-Pressure Differential Gauges with U-Tube
Also known as manometers, these gauges come with indicating liquid that moves up and down two columns—the difference in height between them is your pressure. They are commonly used to indicate clogged filters.
- For Use With: Acetylene, Air, Argon, Carbon Dioxide, and Steam
- Accuracy: Not Rated (Not Graded)
Environment Temp. Range | Process Temp. Range | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pressure Range, in. of H₂O | Scale Range, in. of H₂O | Numeric Increments, in. of H₂O | Graduation Marks, in. of H₂O | Max. Pressure, psi | Ht. | Min., °F | Max., °F | Min., °F | Max., °F | Gender | Mount Type | Fasteners Included | Hole Dia. | Number of Holes | Each | |
With 1/4 NPT Female Threaded Pipe Connection | ||||||||||||||||
| 0-10 | 5-0-5 | 1 | 0.1 | 250 | 14" | 35° | 150° | 35° | 250° | Female | Screw On | No | 3/16" | 4 | 0000000 | 0000000 |
| 0-15 | 7-0-7 | 1 | 0.1 | 250 | 18" | 35° | 150° | 35° | 250° | Female | Screw On | No | 3/16" | 4 | 0000000 | 000000 |
Tank-Mount Pressure-Regulating Valves for Fuel Gases
- For Use With: See Table
- Temperature Range: -20° to 120° F
Attach these valves to acetylene, hydrogen, methane, propane, or propylene tanks to reduce a high inlet pressure to a lower, stable outlet pressure. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.
Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.
Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.
Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.
Valves with a brass body have a longer service life than valves with a brass and steel body.
Valves with a stainless steel diaphragm can withstand harsh environments.
Inlet | Outlet | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Location | Thread Direction | Pressure Gauge Range, psi | Thread Size | Location | Thread Direction | Pressure Range, psi | Pressure Adjustment Method | Body | Seal | Diaphragm | Each | |
For Use With Acetylene | |||||||||||||
UNF Male Outlet × NGO Female Inlet | |||||||||||||
| CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | Knob | Brass/Steel | PTFE | Rubber | 0000000 | 0000000 |
| CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Rubber | 000000 | 000000 |
UNF Male Outlet × NGO Male Inlet | |||||||||||||
| CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | Knob | Brass/Steel | PTFE | Rubber | 0000000 | 000000 |
| CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Rubber | 000000 | 000000 |
| CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 000000 |
Inlet | Outlet | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Location | Thread Direction | Pressure Gauge Range, psi | Thread Size | Location | Thread Direction | Pressure Range, psi | Pressure Adjustment Method | Body | Seal | Diaphragm | Each | |
For Use With Acetylene | |||||||||||||
UNF Male Outlet × NGO Female Inlet | |||||||||||||
| CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 0000000 |
| CGA 300 | Side | Right Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass/Steel | PTFE | Rubber | 000000 | 000000 |
UNF Male Outlet × NGO Male Inlet | |||||||||||||
| CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass | PTFE | Stainless Steel | 0000000 | 000000 |
| CGA 510 | Side | Left Hand | 0 to 400 | 9/16"-18 | Side | Left Hand | 0 to 15 | T-Handle | Brass/Steel | PTFE | Rubber | 0000000 | 000000 |
Pressure-Regulating Valves for Fuel Gases
- For Use With: See Table
- Temperature Range: See Table
Install these valves directly in gas distribution pipelines for acetylene, hydrogen, or propane. They automatically reduce a high inlet pressure to a lower, stable outlet pressure. Valves have two outlets to fit various pipe configurations and come with a plug to close the unused outlet. The gauge monitors outlet pressure. All valves are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate.
Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.
Inlet | Outlet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | Pipe Size | Location | Max. Pressure, psi | Pipe Size | Location | Pressure Gauge Range, psi | Temperature Range, ° F | End-to-End Lg. | Port-to-Port Lg. | Each | |
NPT Female | |||||||||||
Brass Body—Neoprene/Nylon Diaphragm and Neoprene Seal | |||||||||||
| Acetylene | 1/4 | Side | 350 | 1/4 | Bottom, Side | 0 to 30 | -20° to 120° | 2.60" | 1.32" | 0000000 | 0000000 |