Relative Humidity Gauges

Filter by

Mounting Location

Measurement Unit

Centimeters of Mercury

Centimeters per Hour

Centimeters per Minute

Centimeters per Second

Cubic Centimeters

Cubic Feet

Cubic Meters per Hour

Cubic Meters per Minute

Kilograms per Square Centimeter

Millimeters of Mercury

Ounces per Square Inch

Pounds per Square Inch

Quarts

Relative Humidity

Revolutions per Hour

Revolutions per Minute

Revolutions per Second

Saturation

Siemens

Specific Gravity

Standard Cubic Feet per Minute

Relative Humidity

Measures

Thread Type

System of Measurement

Maximum Temperature

Meter Type

Display Type

Pipe Size

Voltage

Electrical Connection

Bluetooth

M12

Screw-Clamp Terminal

DFARS Specialty Metals

Exempt

For Use With

Heaters

Temperature Tolerance

Enclosure Rating

Adjustability

Data Connection

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Width

Height

Fitting Connection

Export Control Classification Number (ECCN)

REACH

RoHS

Material

7 Products

Wireless Temperature and Humidity Transmitters

Use smartphones and tablets to monitor humidity and temperature within your system or facility. Connect these battery-powered transmitters to your smart device via Bluetooth, and receive data to ensure workplace conditions are suitable for processes, inventory, or personnel. Good for preventative maintenance and route-based monitoring, these transmitters let you choose how frequently you receive the data, and they’ll notify your device when humidity and temperature levels go outside of your thresholds. Download the app, set your parameters, and collect data from up to 300 ft. away. Rated IP65, they are protected against dust and washdowns.

Turn your transmitter into a portable monitoring system by attaching a quick coupling (not included). This allows fast, temporary connections for on-the-go measurements in different locations.

	Temperature		Relative Humidity			Connection Type
	Range, ° F	Accuracy	Range	Accuracy	Response Time, sec.	Pipe Size	Thread Type	Gender	Wireless Range, ft.	Ht.	Wd.	Batteries Included	Enclosure Rating	Manufacture (Series)		Each
Bluetooth Connection



		14 to 185	±1° F	0% to 100%	±5%	10	1/4	NPT	Male	300	2 11/16"	1 7/8"	Yes	IP65	Parker (Sensonode Blue)	7129N11	0000000

Temperature and Humidity Transmitters


	A-Code, 4-Pole Male

These sensors measure temperature and humidity, then send that information to your PLC or controller to regulate heating and cooling equipment, alarms, and data recorders. Choose a sensor that works with your digital IO-Link or analog 4-20 mA system. Clip it to a DIN rail or mount it to a surface, and use the micro M12 plug to connect the sensor to your controller. These sensors are often installed in enclosures.

Sensors meet American, Canadian, and European safety standards. Rated IP20, they’re designed so fingers can’t reach the electrical parts inside and get shocked. They also meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.

Temperature		Relative Humidity
Range	Tolerance	Range	Tolerance	Communication Protocol	Output Current Range, mA	Voltage, V DC	Ht.	Wd.	Dp.	Electrical Connection	For DIN Rail Ht., mm	Mounting Fasteners Included	Enclosure Rating	Certification		Each



	-40° F to 140° F -40° C to 60° C	-1.8° F to 1.8° F -1° C to 1° C	0% to 100%	-4% to 4%	—	4 to 20	24	5 1/2"	1 1/2"	1 1/2"	M12	35	No	IP20	CE Marked, UL Recognized Component, VDE Certified, C-UL Recognized Component	7106N11	0000000


	-40° F to 175° F -40° C to 80° C	-0.54° F to 0.54° F -0.3° C to 0.3° C	0% to 100%	-3% to 3%	IO Link	—	24	5 1/2"	1 1/2"	1 1/2"	M12	35	No	IP20	CE Marked, UL Recognized Component, VDE Certified, C-UL Recognized Component	7106N12	000000

Enclosure Humidistats


Fixed Actuation Point	Adjustable Actuation Point

Reduce the humidity in your enclosure to prevent condensation that can cause corrosion and short circuits. These humidistats switch your heater on when the enclosure reaches the relative humidity setting. Once the humidity falls by 5%, the heater switches off. To install, clip humidistats to a DIN rail.

CSA Certified, CSA-US Certified, CE Marked, and VDE Certified, these humidistats meet American, Canadian, and European safety standards. They also meet UL 94 V-0, so if they catch fire, they self-extinguish within 10 seconds and won’t spread the fire by dripping.

Fixed Actuation Point—Fixed humidistats work for most applications. They keep humidity below 65%, which is when condensation is most likely to form. Since they aren’t adjustable, the humidity setting can’t be tampered with or accidentally changed.

Adjustable Actuation Point—For critical components, use adjustable humidistats to set the relative humidity you need in your enclosure. Use a lower humidity setting in damp environments and places with frequent temperature changes. Condensation is more likely in these situations.

	RH							Overall
	Setting	Difference	Tolerance	Voltage	Current	For DIN Rail Ht., mm	Switch Designation	Ht.	Wd.	Dp.	Enclosure Rating	Certification	Flammability Rating	Mounting Location		Each
Fixed



		65%	5%	-1% to 1%	120V AC	16 amp	35	SPDT	2 1/2"	1 5/8"	1 1/2"	IP20	CE Marked, VDE Certified, CSA Certified, CSA-US Certified	UL 94 V-0	DIN Rail, Enclosure	3869N14	000000


		65%	5%	-1% to 1%	240V AC	16 amp	35	SPDT	2 1/2"	1 5/8"	1 1/2"	IP20	CE Marked, VDE Certified, CSA Certified, CSA-US Certified	UL 94 V-0	DIN Rail, Enclosure	3869N13	00000


		Adjustable



				40% to 90%	5%	-1% to 1%	120V AC	16 amp	35	SPDT	2 1/2"	1 5/8"	1 1/2"	IP20	CE Marked, VDE Certified, CSA Certified, CSA-US Certified	UL 94 V-0	DIN Rail, Enclosure	3869N12	00000


				40% to 90%	5%	-1% to 1%	240V AC	16 amp	35	SPDT	2 1/2"	1 5/8"	1 1/2"	IP20	CE Marked, VDE Certified, CSA Certified, CSA-US Certified	UL 94 V-0	DIN Rail, Enclosure	3869N11	00000