System of Measurement System of Measurement | Show |
|---|
|
System of Measurement System of Measurement | Hide |
|---|
Graduations Graduations |
|---|
|
|
Maximum Torque Maximum Torque |
|---|
|
|
Battery Type Battery Type |
|---|
|
Clockwise Accuracy Clockwise Accuracy |
|---|
|
Counterclockwise Accuracy Counterclockwise Accuracy |
|---|
|
Data Connection Type Data Connection Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Material Material |
|---|
|
Torque-Measuring Direction Torque-Measuring Direction |
|---|
|
Certification Certification |
|---|
|
Display Display |
|---|
|
Minimum Torque Minimum Torque |
|---|
|
|
Power Source Power Source |
|---|
|
Specifications Met Specifications Met |
|---|
Square Drive Size Square Drive Size |
|---|
|
About Torque Tools
More
Torque Testers for Torque-Limiting Power Tools
Calibrate torque-limiting power tools such as air-powered and impact drivers. These testers check clockwise and counterclockwise torque, so fasteners do not fail because they were too loose or over-tightened and deformed. They record the first time your maximum torque is reached (peak down), the maximum torque (peak), and torque as it's measured (real-time). Use the flexible or rigid joints to connect your tools to these testers to simulate your fastening application. These testers have a calibration certificate with test data traceable to NIST, so they meet standards for accuracy.
Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.
Connect to computers, laptops, or tablets that run on Microsoft Windows with a USB cable and analyze results with data acquisition software (both sold separately).
Testers cannot be sold to California or Oregon due to energy efficiency requirements.
For technical drawings and 3-D models, click on a part number.
Accuracy | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Joint Hex Head Wd., mm | Torque Range | Graduations | Torque-Measuring Direction | Clockwise | Counterclockwise | Ht. | Wd. | Dp. | Material | Battery Type | Charger Plug Type | Includes | Each | |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | ||||||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||||||
| 14 | 3 to 220 lbf-in. 3 to 250 kgf-cm 30 to 2,500 N-cm | 0.001 kgf-cm 0.1 lbf-in. 1 N-cm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 3" | 6" | 8 1/2" | Steel | Rechargeable | Two Prong | 1 Drive Adapter (3/8" Hex Shank), 2 Joints (Flexible and Rigid), Carrying Case | 000000 | 000000000 |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration—ISO 17025 | ||||||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||||||
| 14 | 3 to 220 lbf-in. 3 to 250 kgf-cm 30 to 2,500 N-cm | 0.001 kgf-cm 0.1 lbf-in. 1 N-cm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 3" | 6" | 8 1/2" | Steel | Rechargeable | Two Prong | 1 Drive Adapter (3/8" Hex Shank), 2 Joints (Flexible and Rigid), Carrying Case | 000000 | 00000000 |
Torque Tool Testers for Torque Screwdrivers
Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening. A chuck-like adapter simulates your fastener joint during testing. Return the fastener to its starting position with the press of a button to reduce time between tests. These testers record the first time you reach the maximum torque (peak down), the maximum torque (peak), and torque as it's measured (real-time). A track mode lets you monitor fluctuating torque. For quick pass/fail testing, these testers have programmable high/low set points with lights and an alarm. They include a calibration certificate with test data traceable to NIST that states they have passed tests for accuracy.
Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.
Use data acquisition software and a USB cable (each sold separately) to analyze results and connect to computers, laptops, or tablets that run on Microsoft Windows.
Testers cannot be sold to California or Oregon due to energy efficiency requirements.
For technical drawings and 3-D models, click on a part number.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Screw Size | Torque Range | Graduations | Clockwise | Counterclockwise | Battery Type | Charger Plug Type | Includes | Cannot Be Sold To | Each | |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | ||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||
| No. 2 | 0.02 to 6.97 lbf-in. 0.02 to 8 kgf-cm 0.2 to 78.6 N-cm | 0.001 lbf-in. 0.001 kgf-cm 0.01 N-cm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | CA, OR | 000000 | 000000000 |
lbf-in., kgf-cm, N-cm, Nm | ||||||||||
| No. 2, No. 3 | 0.2 to 53 lbf-in. 0.2 to 61.06 kgf-cm 2 to 598.8 N-cm 0.02 to 6 Nm | 0.01 lbf-in. 0.01 kgf-cm 0.1 N-cm 1 Nm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | CA, OR | 000000 | 00000000 |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration—ISO 17025 | ||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||
| No. 2 | 0.02 to 6.97 lbf-in. 0.02 to 8 kgf-cm 0.2 to 78.6 N-cm | 0.001 lbf-in. 0.001 kgf-cm 0.01 N-cm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | CA, OR | 000000 | 00000000 |
lbf-in., kgf-cm, N-cm, Nm | ||||||||||
| No. 2, No. 3 | 0.2 to 53 lbf-in. 0.2 to 61.06 kgf-cm 2 to 598.8 N-cm 0.02 to 6 Nm | 0.01 lbf-in. 0.01 kgf-cm 0.1 N-cm 1 Nm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | CA, OR | 000000 | 00000000 |