Filter by
OD
Jaw Overall Length
Jaw Tip Width
Forcing Screw Thread Size
Forcing Screw Overall Length
Jaw Control Type
Forcing Screw Thread Pitch
DFARS Specialty Metals
Export Control Classification Number (ECCN)
T-Handle Material
Material
About External and Internal Grip Pullers
More
Quick-Hold External Grip Pullers
Jaws stay aligned, so you can secure bearings and pulleys quickly. Use these pullers to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with a cage keep the jaws aligned.
Pullers with spring-loaded jaws automatically center their jaws and move in unison, allowing for quick one-handed use. This also prevents the misalignment that can occur with self-locking jaws. Spring tension holds the jaws against the object being pulled.
Pullers with two jaws have a flatter profile than pullers with more jaws, so they can fit in tighter spaces.
Pullers with three jaws are more stable and distribute their pulling force more evenly than pullers with two jaws. Use them when space allows.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
Two Jaws with Tips on One End
Cage Control
Spring-Loaded Control
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size  | Each | Each | Each | Each | ||||
Cage Control | |||||||||||||||||
| 1/4"-3 1/4" | 2 1/4" | 1 | Steel | Steel | Steel | 11/32" | 1/8" | 5 1/2" | 5/16"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 1/4"-4 1/4" | 3" | 2 | Steel | Steel | Steel | 5/16" | 3/16" | 7" | 3/8"-24 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 1/2"-5" | 4" | 2 | Steel | Steel | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2"-7" | 6" | 6 | Steel | Steel | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 3/4"-12" | 8" | 12 | Steel | Steel | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1"-15" | 9 5/8" | 14 | Steel | Steel | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1 1/2"-30" | 20" | 25 | Steel | Steel | Steel | 25/32" | 13/32" | 26 1/4" | 1 1/8"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 2 1/4"-15 3/4" | 16" | 12 | Steel | Steel | Steel | 11/16" | 7/16" | 16 1/2" | 3/4"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 2 1/2"-18" | 12" | 25 | Steel | Steel | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 35 | Steel | Steel | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Spring-Loaded Control | |||||||||||||||||
| 1/2"-3 7/8" | 3 7/8" | 3 | Steel | __ | Steel | 21/32" | 1/8" | 5 3/4" | M12 × 1.5 mm | 00000000 | 00000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 3/4"-4 3/4" | 4 3/4" | 5 | Steel | __ | Steel | 11/16" | 1/8" | 6 7/8" | M14 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-6 3/8" | 6 3/8" | 6 | Steel | __ | Steel | 13/16" | 1/8" | 9" | M18 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-9 7/8" | 7 7/8" | 7 | Steel | __ | Steel | 1 1/8" | 3/16" | 11" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-11 7/8" | 9 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 12 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-14 3/4" | 11" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 16 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
Three Jaws with Tips on One End
Cage Control
Spring-Loaded Control
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
Cage Control | |||||||||||||||||
| 1/4"-3 1/4" | 2 1/4" | 1 | Steel | Steel | Steel | 1/4" | 1/8" | 5 1/2" | 5/16"-24 | 00000000 | 0000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 1/4"-4 1/2" | 3" | 2 | Steel | Steel | Steel | 7/16" | 3/16" | 7" | 3/8"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 1/2"-5" | 4" | 5 | Steel | Steel | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1/2"-7" | 6" | 10 | Steel | Steel | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 3/4"-12" | 8" | 17 | Steel | Steel | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1"-15" | 9 5/8" | 20 | Steel | Steel | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 2"-38" | 26" | 40 | Steel | Steel | Steel | 7/8" | 15/32" | 31 3/4" | 1 1/4"-14 | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 2 1/4"-22" | 16" | 17 | Steel | Steel | Steel | 11/16" | 7/16" | 16 1/2" | 3/4"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 2 1/2"-18" | 12" | 30 | Steel | Steel | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 40 | Steel | Steel | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Spring-Loaded Control | |||||||||||||||||
| 1/2"-3 7/8" | 3 7/8" | 4 | Steel | __ | Steel | 21/32" | 1/8" | 5 3/4" | M12 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 3/4"-4 3/4" | 4 3/4" | 6 | Steel | __ | Steel | 11/16" | 1/8" | 6 7/8" | M14 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-6 3/8" | 6 3/8" | 8 | Steel | __ | Steel | 13/16" | 1/8" | 9" | M18 × 1.5 mm | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-9 7/8" | 7 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 11" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-11 7/8" | 9 7/8" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 12 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-14 3/4" | 11" | 10 | Steel | __ | Steel | 1 1/8" | 3/16" | 16 5/8" | 5/8"-14 | 00000000 | 000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
| 7/8"-23 5/8" | 13 3/4" | 10 | Steel | __ | Steel | 1 9/32" | 3/16" | 20 5/8" | 5/8"-14 | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
External Grip Pullers
Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
Two Jaws with Tips on One End
Jaw Tip | Adjustment Holes | Forcing Screw | Pullers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Pipe Size | Each | |
| 0"-3 3/16" | 3 3/16" | 1 1/2 | Steel | Steel | Steel | 13/32" | 13/64" | 1 | 11/64" | 4.92" | M9 × 1.5 mm | __ | 00000000 | 000000 |
| 1 1/32"-9 7/8" | 8 5/8" | 7 1/2 | Steel | __ | Steel | 15/16" | 45/64" | 2 | 13/32" | 8 21/32" | 1/2"-14 | __ | 00000000 | 000000 |
| 1 1/2"-11 7/8" | 11 1/32" | 11 | Steel | __ | Steel | 1 3/16" | 45/64" | 2 | 31/64" | 11 13/16" | __ | 3/4 | 00000000 | 000000 |
| 1 1/2"-15 3/4" | 15 3/4" | 11 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | __ | 3/4 | 00000000 | 000000 |
| 1 1/2"-19 3/4" | 21" | 13 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | __ | 3/4 | 00000000 | 000000 |
Two Jaws with Tips on Both Ends
Adjustment Holes | Forcing Screw | Pullers | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
| 5/8"-3 7/8" | 3" | 1 1/2 | Steel | Steel | 7/16" × 15/64", 7/16" × 15/64" | 2 | 1/4" | 3 11/32" | M12 × 1.5 mm | 00000000 | 000000 |
| 3/4"-5 7/8" | 3 3/8" | 5 1/2 | Steel | Steel | 19/32" × 9/32", 23/64" × 9/32" | 2 | 21/64" | 5 5/16" | M14 × 1.5 mm | 00000000 | 000000 |
| 1 1/32"-8 5/8" | 5 1/8" | 7 1/2 | __ | __ | 1 1/32" × 9/32", 25/32" × 9/32" | 2 | 13/32" | 8 21/32" | 1/2"-14 | 00000000 | 000000 |
Three Jaws with Tips on One End
Puller with T-Handle
Puller
Jaw Tip | Adjustment Holes | Forcing Screw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Pipe Size | Each | |
| 1/2"-3 3/16" | 3 3/16" | 1 1/2 | Steel | Steel | Steel | 7/16" | 13/64" | 1 | 11/64" | 4 9/64" | M9 × 1.5 mm | __ | 00000000 | 000000 |
| 1 1/2"-15 3/4" | 15 3/4" | 11 | Steel | __ | Steel | 1 3/16" | 25/32" | 3 | 31/64" | 15 3/4" | __ | 3/4 | 00000000 | 000000 |
| 1 1/2"-19 3/4" | 19 1/4" | 13 | Steel | __ | Steel | 1 3/16" | 25/32" | 2 | 31/64" | 15 3/4" | __ | 3/4 | 00000000 | 000000 |
Combination 2/3 Jaws with Tips on One End
Jaw Tip | Adjustment Holes | Forcing Screw | Pullers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Pipe Size | Each | |
| 1 1/32"-11 7/8" | 8 5/8" | 7 1/2 | Steel | Steel | 15/16" | 45/64" | 3 | 31/64" | 8 21/32" | 1/2"-14 | __ | 00000000 | 0000000 |
| 1 1/2"-15 3/4" | 11 1/32" | 11 | Steel | Steel | 1 3/16" | 11/16" | __ | 1/2" | 12 11/16" | __ | 3/4 | 00000000 | 000000 |
| 1 1/2"-17 3/4" | 15 3/4" | 11 | Steel | Steel | 1 3/16" | 3/4" | 3 | 1/2" | 16 5/8" | __ | 3/4 | 00000000 | 000000 |
Combination 2/3 Jaws with Tips on Both Ends
Adjustment Holes | Forcing Screw | Pullers | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
| 5/8"-4 3/4" | 3" | 1 1/2 | Steel | Steel | 7/16" × 15/64", 7/16" × 15/64" | __ | 1/4" | 3 11/16" | M12 × 1.5 mm | 00000000 | 000000 |
| 3/4"-7 1/8" | 3 3/8" | 5 1/2 | Steel | Steel | 19/32" × 9/32", 23/64" × 9/32" | __ | 21/64" | 5 5/16" | M14 × 1.5 mm | 00000000 | 000000 |
| 1 1/32"-11 1/32" | 5 1/8" | 7 1/2 | Steel | Steel | 1 1/32" × 9/32", 3/4" × 9/32" | 1 | 3/8" | 8 21/32" | 1/2"-14 | 00000000 | 000000 |
Economy External Grip Pullers
This low-capacity puller is often used to remove corroded battery terminals.
Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, lbs. | O'all Lg. | Tip Wd. | Tip Thick. | Puller Material | Includes | Each | |
| 3/4"-1 1/2" | 1 3/4" | 12 | 4" | 3/16" | 3/16" | Steel | Forcing Screw with T-Handle | 000000 | 00000 |
High-Force External Grip Puller Sets
Move the immovable—these puller sets include a hand pump and hydraulic cylinder, so you can create a large amount of pulling force. However, these pullers produce more direct, constant thrust than pullers with a forcing screw. They have mounting holes in both a 2- and 3-jaw configuration for attaching the jaws either way. The jaws have no control mechanism, so they swing free.
Pullers with a 45 ton capacity can be used to grip bearings, gears, and wheels from the outer edge to pull them off a shaft.
| Capacity, tons | Puller Material | Includes | Each | |
| 17 1/2 | Steel | 3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD; 11 1/2" Reach) Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD; 18 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Bearing Separator (1/2"-9" Spread) Crank Handle Hose Half Coupler with Dust Cap Hydraulic Cylinder (2" Stroke) Hydraulic Hose - 6 Feet Internal-Grip Jaw Attachment (For 1 1/2"-9" OD; 4" Reach) for 3-Jaw External-Grip Hydraulic Puller Pair of Legs (22 1/2" Reach) for Face-Grip Puller Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Three Threaded Adapters Two Pushing Adapters Wood Case | 0000000 | 000000000 |
| 45 | Steel | 2-Jaw External Grip Hydraulic Puller—45-ton Capacity (For Up to 18" OD; 27 1/2" Reach) 3-Jaw External Grip Hydraulic Puller—50-ton Capacity (For Up to 18" OD; 27 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Crank Handle Hose Half Coupler with Dust Cap Hydraulic Cylinder (3" Stroke) Hydraulic Hose - 6 Feet Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Metal Case | 0000000 | 000000000 |