McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    56 Products

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    With reversible jaws that stay aligned, these pullers can quickly grip objects from the outside or inside. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    3 3/4" to 6 1/4"1/2" to 5"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw3765A720000000
    4" to 4 3/4"1/4" to 3 1/2"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw3765A71000000
    4" to 8 3/4"1/2" to 6 1/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw3765A73000000
    4" to 10 1/4"1/2" to 7 3/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw3765A74000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw3765A75000000
    7" to 17 1/4"0" to 13 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw3765A76000000
    7 3/4" to 23 1/4"1/2" to 20 1/2"11 7/8"15SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw3765A9100000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw3765A77000000
    2 3/4" to 7"1/4" to 4 3/4"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw3765A96000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw3765A78000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw3765A97000000
    7" to 13 1/2"3/4" to 9 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw3765A79000000
    7" to 17 1/4"3/4" to 13 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw3765A98000000
     
    Three Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    2 3/4" to 5 1/2"0" to 3 1/2"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw3765A810000000
    2 3/4" to 7"0" to 5"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw3765A82000000
    4" to 8 3/4"0" to 6 1/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw3765A83000000
    4" to 10 1/4"0" to 7 3/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw3765A84000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw3765A85000000
    7" to 17 1/4"4 1/4" to 14 3/4"7 7/8"13 1/2SteelSteel17 3/4"1"-117 3/4"1 3/8" × 5/32"Forcing Screw3765A86000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"11 7/8"16 1/2SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw3765A9200000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"19 3/4"16 1/2SteelSteel17 3/4"1"-1119 3/4"1 3/8" × 5/32"Forcing Screw3765A9300000000
    11" to 23 1/2"5" to 20 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw3765A9400000000
    11 1/2" to 29 1/4"6" to 25 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw3765A9500000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw3765A87000000
    2 3/4" to 7"1/4" to 5"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw3765A99000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw3765A88000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw3765A11000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw3765A89000000
     
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End, Standard Jaw—Spring-Loaded Control.

    Standard Jaw—Spring-Loaded

    Control

    Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Lift up the base to add or remove jaws.
    Spring-Loaded Control—Pullers with spring-loaded jaws lock in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Pullers
    Replacement
    Forcing Screws
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Each
    Standard Jaw—Spring-Loaded Control
    3" to 4"3" to 4"4"2SteelSteel8 3/4"M15 × 2 mm4"9/16" × 3/16"Forcing Screw3765A5300000003765A61000000
    3" to 7"3" to 7"7"5SteelSteel11 3/4"M18 × 2.5 mm7"7/8" × 1/4"Forcing Screw3765A570000003765A6900000
     

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box .
    Complete with a locking cabinet, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Wt. Cap., ton
    Puller
    Material
    Includes
    Each
    5 1/2 to 7 1/2SteelInternal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    Steel Locking Cabinet (25 3/4" Height, 29 1/2" Width, 10" Depth)
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD, 5" Reach)
    Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD, 3 1/4" Reach)
    Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller)
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		69715A45000000000
     

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws—Bar Control.
    Image of Product. Two Jaws and Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, .

    Two Jaws—Bar Control

    Two Jaws and Combination 2/3 Jaws

    Image of Product. 4 Two Jaws and 2 Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, 5 ton to 10 ton Capacity.

    4 Two Jaws and 2 Combination 2/3 Jaws

    Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Two Jaw—Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Wt. Cap.,
    ton
    Puller
    Material
    Forcing Screw
    Material
    Includes
    Each
    Two Jaws—Bar Control
    5SteelSteelCrossbar
    Forcing Screw (7/8"-9" Thread Size, 8" Long)
    Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach)
    Two Jaw-Mounting Screws    		6337K1000000000
     
    Two Jaws and Combination 2/3 Jaws
    Not RatedSteel—Slide Hammer Puller with Grip Handle
    Clamping Cone
    Puller Hook
    2-Jaw Jaw Bar
    4 Sets of 2/3 Reversible-Jaw External/Internal Jaws (For 1"-8" ID, For 1/4"-6 3/4" OD, 4 3/4"-6 1/2" Reach)    		6317K44000000
    5 to 10Steel—2-Reversible-Jaw External/Internal Grip Puller —5-ton Capacity (For 5/8"-6" OD)
    2/3-Jaw External Grip Puller—10-ton Capacity (For Up To 16" OD, 11" Reach)
    2-Reversible-Jaw External/Internal Grip Puller —7-ton Capacity (For 1/2"-8 5/8" OD)
    Internal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		6349K5200000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Straight-Tip Jaw for 6337K1 (25 tons; 6" Reach)6337K23 Pair 0000000
    Straight-Tip Jaw for 6337K1 (25 tons; 10" Reach)6337K24 Pair 000000
    Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw)6337K11 Each 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 5" Reach)6337K13 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 6" Reach)6337K14 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 8" Reach)6337K15 Pair 000000
    Replacement Tapered-Tip Jaw for 6337K1 (5 tons; 6" Reach)6337K16 Pair 000000

    Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out. Use the slide hammer to extract hard-to-remove objects.
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End.
    Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application.
    For ID
    For OD
    Reach Lg.
    Wt. Cap.
    Puller
    Material
    T-Handle
    Material
    Includes
    Each
    1 1/4" to 4 1/4"1" to 4 1/2"1 1/4", 3"Not RatedSteelSteelT-Handle6317K80000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)—Crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
    Replacement Jaw Bar (⅝"-18 Thread Size)—Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
    Each
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)6317K6000000
    Internal Jaw (For ¾"-2 ½" ID; 2 ⅜" Reach)6317K1400000
    External/Internal Jaw (For 1 ¼"-3 ½" ID; For 1"-4 ½" OD; 3 ¾" Reach)6317K1100000
    External/Internal Jaw (For 1 ½"-4 ½" ID; For ¾"-5" OD; 4 ⅛" Reach)6317K1200000
    External/Internal Jaw (For 2 ¾"-5 ½" ID; For ¾"-7 ½" OD; 6 ½" Reach)6317K1300000
    Puller Hook (For ⅝" Minimum ID)6317K700000
    2.5-lb. Slide Hammer (⅝"-18 Thread Size)6317K100000
    5-lb. Slide Hammer (⅝"-18 Thread Size)6317K200000
    Replacement Jaw Bar (⅝"-18 Thread Size)6317K500000
    Replacement Adjusting Cone6317K27400000

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Narrow Jaw—Bar Control.
    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Standard and Narrow Jaw—Bar Control.

    Narrow Jaw—Bar Control

    Standard and Narrow Jaw—Bar Control

    To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Thread Size
    Includes
    Each
    Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    5 1/2SteelSteelM14 × 1.5 mmQuick-Hold 2-Jaw Reversible External/Internal Grip Puller
    Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID, For 1 1/16"-5 1/8" OD, 3 15/16"-9 13/16" Reach)
    Set of Jaw Extensions (3 15/16" Long)
    Forcing Screws (1 of each: 6 5/16" Long, 9 13/16" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		4614N110000000
     
    Standard and Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    7 1/2SteelSteel1/2"-14
    		Quick-Hold 2-Jaw Reversible External/Internal Grip Puller
    One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    Two Sets of Jaw Extensions (5 15/16" Long)
    Forcing Screws (1 of each: 8 5/16" Long, 14" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		4614N1200000000
     
    back to top