Bearing/V-Belt Pulley Separator Sets
Set with Face-Grip Puller
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included with all sets) to remove them from the shaft.
| Thread Size  | Material | Includes | Each | |
| 3/4"-14 | Steel | Separator (1 3/16"-9 7/8" Spread) Face-Grip Puller (For 5 7/8"-17 3/8" OD; 15 3/4" Reach; 3/4"-14 Leg Thread Size) with 19 5/8" Long Forcing Screw Pair of Legs (7 7/8" Reach) for Face-Grip Puller Grease Plastic Case | 0000000 | 000000000 |
Expanding-Collar Internal Grip Pullers
Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
Ready-to-use pullers have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge or a slide hammer (both sold separately) to apply force. A safety catch prevents the puller from overextending.
For technical drawings and 3-D models, click on a part number.
Ready-To-Use Pullers
| For Shaft Dia. | Thread Size | Puller Material | Each | |
| 3 7/8"-7 7/8" | 3/4"-14 | Steel | 0000000 | 0000000 |
Bridges for Ready-To-Use Pullers
| For Thread Size | Reach | Width | Includes | Each | |
| 3/4"-14 | 10 3/16" | 11 3/4" | Forcing Screw with T-Handle | 00000000 | 0000000 |
Slide Hammers for Ready-To-Use Pullers
| For Thread Size | Weight, lbs. | Overall Length | Material | Each | |
| 1/2"-14; 3/4"-14 | 19.8 | 27 5/8" | Steel | 00000000 | 0000000 |