We will reply to your message within an hour.
More
Ball-and-socket connections allow 360° positioning.
With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.
Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Use these bearings in corrosive environments and under water.
An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.
These bearings have the highest speed ratings of any mounted ball bearing in our offering.
Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.
These roller bearings handle extremely high speeds for their small size.
A bolt in each corner makes for a secure, even hold.
Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.
The lubricant in these mounted ball bearings is suitable for incidental contact with food.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.
The tapered rollers in these bearings support large shafts at high static loads.
With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
With all three mounting holes on one side, you can position the bearing above or below the mounting surface.
Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.
Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.
Ball bearings operate with less friction than other bearings, so they can run at higher speeds.
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.
Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.
Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
These bearings have the highest speed ratings of any mounted ball bearing that we offer.
Synthetic grease or graphite enables these bearings to operate in high temperatures.
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Made of high-performance plastic, these insert bearings last longer than metal insert bearings. They also don’t require lubrication.
Swap out worn inserts instead of replacing the entire mounted unit.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
A slippery PTFE liner reduces wear and eliminates the need for lubrication.
Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints.
These nylon swivel joints are 80% lighter than steel swivel joints with better corrosion resistance.
Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints.
A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads.
Hang your human-machine interface and swivel it around to save floor space and comfortably access touch screens, buttons, and other operating equipment.