Use these sleeves alone or with gloves to protect your arms from heat.

Kevlar aramid/fiberglass blend sleeves are abrasion resistant. Open cuffs are convenient to put on and take off. Fasten the wrist snap for a closer fit. Sleeves with an adjustable strap can be tightened around the upper arm to keep them in place.

These gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. They are made from kevlar aramid, so they absorb moisture. Knit cuffs provide a secure fit.

Style B gloves have raised dots on both sides for a secure grip in wet and oily conditions. Gloves are ambidextrous and can be worn on either hand for convenience or to extend use when the grip on one side wears down.

Use these sleeves alone or with gloves to protect your arms when handling sharp objects. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the sleeve using a razor blade.

Kevlar aramid sleeves absorb moisture. Use sleeves with knit cuffs for a secure fit.

Keep your gloves close at hand. These clips have a safety breakaway feature to prevent wearers from getting snagged by equipment.

Attach clip-on glove clips around belt loops or directly to clothing.

Slip slide-on glove clips over belts, waistbands, and pockets. They hold gloves in a higher position than the clip-on clips, which helps keep them from moving around.

Use these kits for head-to-toe protection from chemical spills and splashes. They come with everything you need to avoid contact with acetone, gasoline, and other harsh substances.