About Sealant Flexibility
More
About Paint and Protective Coatings
More
Noncorrosive Silicone Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Color | Each | |
Loctite® Silicone | |||||||||||||
SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 000000 |
SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 15A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Red | 0000000 | 00000 |
Permatex Silicone | |||||||||||||
81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 15A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 00000 |
Low-Outgassing Silicone Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum. They’re made of silicone, so they’re RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
5.8 | Cartridge | 150 min. | 7 days | 420% | -25% to 25% | 600 | Durometer 36A (Medium Soft) | -200° to 500° | ASTM E595 | Metal Plastic Rubber Composites Glass | White | 0000000 | 0000000 |
Optically Clear Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Each | |
3M Hybrid Polymer | ||||||||||||
730 UV | 10.3 | Cartridge | 30 min. | 24 hrs. | 300% | Not Rated | 250 | Soft (Durometer 30A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | 0000000 | 000000 |
Puncture-Resistant Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
All-Weather Application Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | 1-11 | 12-Up | |
Hybrid Polymer | |||||||||||||
10 | Cartridge | 5 min. | 14 days | Not Rated | -25% to 25% | Not Rated | -20° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | White | CA | 0000000 | 000000 | 000000 |
10 | Cartridge | 10 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -65° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | Clear | __ | 0000000 | 00000 | 00000 |
Structural Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
3M Polyurethane | ||||||||||||
540 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | -25% to 25% | Medium Soft (Durometer 40A) | -40° to 190° | Metal Plastic Rubber Composites Wood | 00000000 | 00000 | |
551 | 20.3 | Sausage Pack | 180 min. | 24 hrs. | 600% | Not Rated | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | White | 00000000 | 00000 |
560 | 20.3 | Sausage Pack | 60 min. | 24 hrs. | 300% | Not Rated | Medium Hard (Durometer 55A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
Sika Sikaflex Polyurethane | ||||||||||||
1-A | 10.1 | Cartridge | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 0000000 | 00000 | |
1-A | 20 | Sausage Pack | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Limestone | 00000000 | 00000 |
15LM | 10.1 | Cartridge | 6 hrs. | 7 days | 700% | -50% to 100% | Soft (Durometer 20A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 00000000 | 00000 |
Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
All-Weather Application Structural Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2966k58p1-g02a-digital@halfx_636961293003340322.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637074246167676223.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-white-spec-@halfx_637166702356627137.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-dark-bronze-spec-@halfx_637166702301477321.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-limestone-spec-@halfx_637166701969550702.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-tan-spec-@halfx_637166702299400414.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-black-spec-@halfx_637166701969600409.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-gray-spec-@halfx_637166701969038483.png?ver=imagenotfound)
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
Self-Leveling Oil- and Fuel-Resistant Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Buna-N | |||||||||||||
4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 00000 | |
10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 0000 |
Vacuum Leak Sealants
Seal leaks on vacuum systems and components.
Epoxy resin sealants, also known as Torr Seals, form a rigid bond.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/485/4852n14-@halfx_0e9s3_1712331671.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-twopart-tubes-@halfx_637032729276356507.png?ver=imagenotfound)
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Vacuum Rating, torr | Maximum Vacuum @ Temperature | Tensile Strength, psi | Hardness | Mix Ratio | Temp. Range, °F | For Joining | Color | Each | |
Epoxy Resin | |||||||||||||
2 fl. oz. | Cartridge | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 0000000 |
4.2 fl. oz. | Tube | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/485/4852n12-@halfx_1712062678.png?ver=imagenotfound)
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Vacuum Rating, torr | Maximum Vacuum @ Temperature | Tensile Strength, psi | Hardness | Mix Ratio | Temp. Range, °F | For Joining | Color | Each | |
Epoxy Resin | |||||||||||||
2 | Cartridge | 60 min. | 3 days | High | 10 -9 torr @ 72° F | 5,000 | Extra Hard (Durometer 75D) | 2:1 | -45° to 245° | Metal, Glass, Masonry | Off-White | 0000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/485/4852n13-@halfx_1711137834.png?ver=imagenotfound)
Loading Method | For Cartridge Size | Material | Each | |
Cartridge | 2 oz. | Plastic | 0000000 | 0000000 |
Thread Sealant Tape for Stainless Steel Threads
![](/prerenderstable/mvPRE/contents/gfx/imagecache/449/44945k35p1-b05-digital@halfx_636961280056181228.png?ver=imagenotfound)
This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Specifications Met | Color | 1-11 | 12-Up | |
PTFE | |||||||||||
0.0043" Thick. | |||||||||||
1/4" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
3/8" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
1/2" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
1/2" | 50 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
3/4" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
1" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
1" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
1 1/2" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Hybrid Polymer | ||||||||||||||
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | 0000000 | 000000 |
All-Weather Application Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Sika Sikaflex Polyurethane | |||||||||||||||
1C SL | 10.1 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
1C SL | 29 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
High-Strength Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikasil Silicone | ||||||||||||||
728 NS | 29 | Cartridge | 25 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 10A) | 1" | 1/2" | -80° to 350° | Metal, Plastic, Rubber, Composites, Masonry, Wood | Limestone | 0000000 | 000000 |
Silicone | ||||||||||||||
__ | 20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
__ | 29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
Primer for Sika Sikasil Sealant (8-fl. oz. Bottle) | 0000000 | Each | 000000 |
Self-Leveling Roof Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | 40° to 100° | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
EPDM Rubber | |||||||||||
10.3 | Cartridge | 4 hrs. | 3 days | Not Rated | Not Rated | 20° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Roof Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Asphalt | ||||||||||||
10.1 | Cartridge | 60 min. | 28 days | Not Rated | Not Rated | Not Rated | Not Rated | -40° to 180° | Metal, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 00000 |
Aerosol Surface Fillers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/727/7270t2p1-g01e-digital@halfx_636900014198165854.png?ver=imagenotfound)
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Container Net Weight, oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thickness | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
11 | 10 | 24 | 9 sq. ft. @ 2 mil | Yes | 50° to 90° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Iron, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Wood | 000000 | 000000 |
Coolant-Resistant Surface Fillers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/461/46125t7p1-g02a-digital@halfx_636900021534285435.png?ver=imagenotfound)
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Temp. Range, °F | Color | For Use On | Each | |
16 | Jug | 7 | 10 | Thick Liquid | Not Rated to 500° | Brown | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic | 0000000 | 000000 |
Fuel-Resistant Surface Fillers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g01/g01e-global-twopart-can-largesmall-digital@halfx_636960127405261798.png?ver=imagenotfound)
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
1.5 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 000000 |
3 | Can | 5 | 24 | Thick Liquid | 2:1 | No | 70° to 90° | Amber | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain | 0000000 | 00000 |
Optically Clear Two-Part Silicone Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Use it to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compound is the best choice for high-temperature applications and electronics exposed to thermal cycling. It has good moisture resistance but poor chemical and abrasion resistance. Silicone provides excellent electrical insulation. It’s also known as RTV (room-temperature vulcanizing). Use a gun (sold separately) with the included mixer nozzle to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, min. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Soft | |||||||||||
5620 | 13.5 | Thin Liquid | 20 | 30 | 530 | 0.16 | -65° to 390° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Clear | 00000000 | 0000000 |
Ready-to-Use Silicone Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_637074243787250027.png?ver=imagenotfound)
No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).
Container | Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Clarity | Color | Each | |
Loctite® Compounds—Soft | ||||||||||||||
5091 | 10 1/10 | Cartridge | Thick Liquid | 20 sec. | 24 | 450 | Not Rated | -65° to 350° | UL Recognized Component | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Semi-Clear | White | 0000000 | 0000000 |
Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/737/7370a39-74695a71c11580228731-p9@halfx_637158041691926908.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Extra Hard | |||||||||||
3336 | 1.4 | Thick Liquid | 15 min. | 24 hrs. | Not Rated | Not Rated | -65° to 350° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Amber | 0000000 | 000000 |
E-60NC | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 6.8 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 13.5 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
Mixer Nozzle for 6.8 fl. oz. and 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 6.8 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Plunger for 1.4 fl. oz. Loctite Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 1.4 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.7 fl. oz. Loctite Cartridges | 00000000 | Each | 00000 |
Mixer Nozzle for 1.7 fl. oz. Loctite E-60NC Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Optically Clear Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Optically Clear Epoxy Potting Compounds—Extra Hard | ||||||||||
1.7 | Thick Liquid | 40 | 24 | 229 | 0.45 | -65° to 275° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Amber | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a52p1-b05-digital@halfx_637073782957202076.png?ver=imagenotfound)
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
0.9 | Thick Liquid | 25 min. | 24 | 450 | 1.87 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 000000 |
1 | Gel | 4 hrs. | 6 | Not Rated | 1.87 | 600° | 4 hrs. @ 250° F then 2 hrs. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Black | 0000000 | 00000 |
1.5 | Thin Liquid | 30 min. | 26 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1.7 | Thick Liquid | 15 | 8 | 520 | 1.01 | -40° to 210° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a24p1-b05-digital@halfx_637073775372051541.png?ver=imagenotfound)
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch | Overall, hrs. | Mix Ratio | Tensile Strength, psi | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Max. Temp., °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
16 | Thin Liquid | 30 min. | 26 | 6:1 | 9,500 | 450 | 0.59 | 500° | 1 hr. @ 250° F then 1 hr. @ 350° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass | Amber | 0000000 | 0000000 |
Heavy Duty Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-bottle2-digital@halfx_637159000821811243.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-syringe2-digital@halfx_637074246192113867.png?ver=imagenotfound)
Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. They require an ultraviolet curing lamp to reach full strength. Use them to secure and insulate hardware on printed circuit boards.
Syringe coatings require a gun (sold separately) to dispense.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. | Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall | Hardness Rating | Dielectric Strength, V/mil | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
Bottle Coatings | |||||||||||||
__ | __ | 1 4/5 | Thin Liquid | 10 | 60 sec. | Not Rated | 34,000 | -65° to 350° | 10 seconds @ 7 mW/cm 2 | Aluminum, Brass, Copper, Steel, Stainless Steel, Silver, Titanium, Fiberglass | Amber | 00000000 | 000000 |
Syringe Coatings | |||||||||||||
Loctite® | 3751 | 4/5 | Thin Liquid | 10 | 2 min. | Extra Hard | 730 | -65° to 270° | 10 seconds @ 100 mW/cm 2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Yellow | 00000000 | 00000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty High-Purity Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating begins to harden when exposed to UV light. Use it to secure and insulate hardware on printed circuit boards. It requires a gun (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
Loctite® Coatings—Medium Soft | |||||||||||
5240 | 0.85 | Thick Liquid | 10 | 72 | 533.4 | -65° to 195° | 60 seconds per side @ 70 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Composites | Green | 0000000 | 000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty Optically Clear Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating requires an ultraviolet curing lamp to reach full strength. Dispense with a gun (sold separately).
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Hardness Rating | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
0.8 | Thick Liquid | 10 | 24 | Extra Hard | -65° to 300° | 15 seconds @ 100 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Clear | 0000000 | 0000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, epoxies have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. Dispense with a mixer nozzle and a gun (each sold separately).
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
E-00CL | 1.7 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 000000 |
E-00CL | 6.8 | Thick Liquid | 5 | 24 | 400 | -65° to 180° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Clear | 0000000 | 00000 |
Heavy Duty High-Purity Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coating flows easily into small spaces between electrical components. Use it to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, has excellent chemical and moisture resistance, withstands a wide range of temperatures, and provides excellent electrical insulation. It requires a gun and a mixer nozzle (each sold separately) to dispense.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
M-21HP | 1.7 fl. oz. | Paste | 20 | 24 | 500 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Off-White | 0000000 | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Heavy Duty Heat-Transfer Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
This thermally conductive coating keeps electrical components cool by dissipating heat. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1 | Paste | 5 | 2 | 750 | 0.864 | -85° to 347° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | White | 0000000 | 000000 |