About Sealant Flexibility
More
About Structural Adhesives
More
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Dispense adhesives in 10.1 fl. oz. cartridges with a standard caulk gun.
5570 is also known as silane modified polymer.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
5570 | 10.1 | Cartridge | 30 min. | 7 days | 400 | Not Rated | Paste (Not Rated) | -40° to 200° | White | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Composites, Glass, Masonry, Wood, Wood to Glass | 00000000 | 000000 |
Waterproof Wood Glue
In addition to being waterproof, this glue is made of FDA listed materials. It bonds soft and hard woods, and can be sanded and painted after reaching full strength.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | Specifications Met | Each | |
4 fl. oz. | Bottle | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
8 fl. oz. | Bottle | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 0000 |
16 fl. oz. | Bottle | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
32 fl. oz. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
1 gal. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
Temporary Positioning Spray Adhesives
Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.
Container Net Weight, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., °F | Color | For Joining | Each | |
Gorilla Adhesives | |||||||||
---|---|---|---|---|---|---|---|---|---|
14 | 400 sq. ft. @ 1 gm/ft² | 5 min. | 24 hrs. | Not Rated | 90° | Clear | Fabric, Metal | 0000000 | 000000 |
Construction Adhesives for Dissimilar Materials
Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.
Non-sag adhesives won't drip from vertical and overhead surfaces.
Adhesives that cannot be sold to the regions listed are restricted by labeling and reporting requirements in Canada, and by local regulatory limits on VOCs (volatile organic compounds) in the states listed.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | For Use Outdoors | For Joining | Cannot Be Sold To | Choose a Color | Each | |
Adhesives | ||||||||||||||
3.7 | Tube | 10 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
3.7 | Tube | 10 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | Yes | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Thick Liquid | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Black | 0000000 | 00000 |
10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | Yes | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | Clear | 0000000 | 00000 |
Non-Sag Adhesives | ||||||||||||||
10.2 | Cartridge | 30 ft. @ 1/4" bead | 4 min. | 72 hrs. | 200 | 45 | Paste | -40° to 150° | No | Ceramic, Composites, Glass, Masonry, Metal, Metal to Composites, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Wood, Wood to Glass | CA, CO, CT, DE, MD, RI, Canada | 000000 | 00000 |
Construction Adhesives For Ceiling Tiles
Stick tiles to your ceiling without worrying about them falling off or sagging. These adhesives are strong and bond your tiles quickly to painted or unpainted drywall, concrete, metal, and wood.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Container Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Specifications Met | Each | |
1 gal. | Pail | 50 sq. ft. | 15 min. | 48 hrs. | Not Rated | Not Rated | Paste | 0° to 120° | Beige | No | Concrete, Drywall, Metal, Wood | NFPA 101 Class A | 0000000 | 000000 |
High-Temperature Anchoring Adhesives for Concrete
These adhesives maintain their strength in temperatures up to 250° F. Use them to permanently set threaded rods, studs, and rebar in concrete. They form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities.
Use the included mixer nozzle and a dispensing gun (sold separately) to simultaneously mix and dispense adhesive.
Container Size, fl. oz. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
27.9 | 3 min. @ 70° F | 30 min. | 85 in 9/16'' dia. hole | 10,500 lbs.—3/8" Threaded Rod Dia. × 3 3/8" Installation Dp. 16,900 lbs.—1/2" Threaded Rod Dia. × 4 1/2" Installation Dp. 22,700 lbs.—5/8" Threaded Rod Dia. × 5 5/8" Installation Dp. 28,300 lbs.—3/4" Threaded Rod Dia. × 6 3/4" Installation Dp. 29,600 lbs.—7/8" Threaded Rod Dia. × 7 7/8" Installation Dp. 44,200 lbs.—1" Threaded Rod Dia. × 9" Installation Dp. 68,000 lbs.—1 1/4" Threaded Rod Dia. × 11 1/4" Installation Dp. | 10:1 | Paste | 25° to 250° | Gray | 0000000 | 000000 |
Sealants
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | ||
Sika Sikaflex Hybrid Polymer | ||||||||||||||
505 UV | 10.1 | Cartridge | 30 min. | 7 days | 275% | Not Rated | 225 | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 0000000 | 000000 | 00 |
Each | ||||||||||||||
1-11 | 12-Up | |||||||||||||
Hybrid Polymer | ||||||||||||||
__ | 9.5 | Cartridge | 20 min. | 24 hrs. | 250% | -25% to 25% | 225 | Soft (Durometer 25A) | -75° to 250° | Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry | Clear | 0000000 | 00000 | 000000 |
__ | 10.1 | Cartridge | 5 min. | 3 days | 500% | -25% to 25% | 400 | Medium (Durometer 50A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 0000000 | 0000 | 0000 | |
__ | 10.1 | Cartridge | 60 min. | 3 days | 1,000% | -50% to 50% | 350 | Soft (Durometer 25A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 0000000 | 0000 | 0000 | |
__ | 10.3 | Cartridge | 30 min. | 24 hrs. | 450% | -25% to 25% | 180 | Soft (Durometer 35A) | -40° to 195° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | 00000 |
Optically Clear Sealants
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Each | |
3M Hybrid Polymer | ||||||||||||
730 UV | 10.3 | Cartridge | 30 min. | 24 hrs. | 300% | Not Rated | 250 | Soft (Durometer 30A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | 0000000 | 000000 |
Hybrid Polymer | ||||||||||||
__ | 10.1 | Cartridge | 10 min. | 3 days | 300% | -25% to 25% | 300 | Medium Soft (Durometer 38A) | -40° to 200° | Metal Wood | 0000000 | 00000 |
Self-Leveling Sealants
Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
3M Hybrid Polymer | |||||||||||
2084 | 5 | Tube | 5 min. | 24 hrs. | 25 | Not Rated | -30° to 250° | Metal Metal to Glass Glass Wood | Aluminum | 0000000 | 000000 |
All-Weather Application Sealants
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Sealants with 1,000% elongation can be applied through running water.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | ||
Hybrid Polymer | |||||||||||||
9 | Cartridge | 10 min. | 3 days | 450% | -50% to 50% | Medium Soft (Durometer 44A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Clear | __ | 000000000 | 000000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Black | __ | 000000000 | 00000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | White | __ | 000000000 | 00000 | 00 |
Each | |||||||||||||
1-11 | 12-Up | ||||||||||||
10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 20A) | -40° to 180° | Metal Masonry Wood | Clear | __ | 0000000 | 00000 | 000000 |
10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 25A) | -40° to 180° | Metal Masonry Wood | White | CA, Canada | 0000000 | 00000 | 00000 |
10 | Cartridge | 5 min. | 14 days | Not Rated | -25% to 25% | Not Rated | -20° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | White | CA | 0000000 | 00000 | 00000 |
10 | Cartridge | 10 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -65° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | Clear | __ | 0000000 | 00000 | 00000 |
10 | Cartridge | 8 hrs. | 14 days | 550% | -25% to 25% | Soft (Durometer 22A) | -20° to 200° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Masonry Wood | __ | 000000 | 00000 | 00000 | |
10.3 | Cartridge | 45 min. | 4 days | 1,000% | Not Rated | Soft (Durometer 25A) | -40° to 180° | Metal Plastic Rubber Asphalt Composites Glass Masonry Wood | CA, Canada | 000000 | 00000 | 00000 |
Optically Clear All-Weather Application Sealants
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Cannot Be Sold To | Each | |
Hybrid Polymer | ||||||||||||
10.3 | Cartridge | 45 min. | 4 days | 1,000% | 45 | Soft (Durometer 20A) | 40° to 140° | -40° to 180° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CO; CT; DC; DE; MA; MD; ME; NJ; Northern VA; NY; PA; RI; UT; VT | 0000000 | 000000 |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
Loctite® Hybrid Polymer | ||||||||||||
5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 140% | Not Rated | Medium Soft (Durometer 44A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Clear | 0000000 | 00000 |
5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 140% | Not Rated | Medium Soft (Durometer 44A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Gray | 00000000 | 00000 |
5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 320% | Not Rated | Medium Soft (Durometer 35A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | White | 00000000 | 00000 |
5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 375% | Not Rated | Medium Soft (Durometer 35A) | -40° to 200° | Metal Plastic Rubber Composites Masonry Wood | Black | 00000000 | 00000 |
Caulk
Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. Caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | 1-11 | 12-Up | |
Hybrid Polymer | ||||||||||||||
5.5 | Tube | 3 days | 3 days | 600% | Not Rated | Not Rated | Not Rated | -20° to 180° | ASTM C920 | Metal, Plastic, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 | 00000 |
10.1 | Cartridge | 3 days | 3 days | 600% | Not Rated | Not Rated | Not Rated | -20° to 180° | ASTM C920 | Metal, Plastic, Composites, Glass, Masonry, Wood | White | 0000000 | 0000 | 0000 |
Submersible Sealants
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Each | |
3M Hybrid Polymer | ||||||||||||
4000UV | 3 | Tube | 25 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Composites Composites Wood | White | 00000000 | 000000 |
4000UV | 10 | Cartridge | 25 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Composites Composites Wood | White | 00000000 | 00000 |
4000UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | White | 00000000 | 00000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Sealants that begin to harden in 3 minutes are ideal for sealing pavement saw cuts made when installing buried sensing wires, also known as detector loops. You can walk or drive over the seams right away because they dry tack free within minutes.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
They cannot be sold to the listed areas due to VOC (Volatile Organic Compounds) regulations.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Hybrid Polymer | |||||||||||||||
9 | Cartridge | 90 min. | 24 hrs. | 900% | -25% to 25% | Soft (Durometer 25A) | 1/2" | 1/2" | 20° to 120° | -40° to 200° | Masonry, Wood | Gray | __ | 0000000 | 000000 |
28 | Cartridge | 3 min. | 30 hrs. | 1,000% | Not Rated | Soft (Durometer 25A) | 1 1/2" | 3/4" | -20° to 120° | -60° to 350° | Asphalt, Concrete | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, NOVA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 0000000 | 00000 | |
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | __ | 0000000 | 00000 |
Textured Concrete Joint Sealants
The textured finish matches concrete surfaces. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Hybrid Polymer | |||||||||||||
10.1 | Cartridge | 2 hrs. | 24 hrs. | 600% | -25% to 25% | Medium (Durometer 46A) | 1/2" | 3/8" | -40° to 155° | Metal, Asphalt, Composites, Masonry | Gray | 000000 | 00000 |
All-Weather Application Roof Joint Sealants
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater. They're non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Hybrid Polymer | ||||||||||||
10 | Cartridge | 30 min. | 24 hrs. | 559% | 235 | Soft (Durometer 33A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | Black | 000000 | 000000 |
10 | Cartridge | 60 min. | 24 hrs. | 465% | 115 | Soft (Durometer 19A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | White | 000000 | 00000 |