Filter by
Container Type
Begins to Harden
Manufacturer
Material
For Use On
Manufacturer Model Name
Type
Elongation
Cure Type
Container Size
Adhesive Type
Shear Strength
Mix Ratio
Peel Strength
Formulation
Maximum Temperature
Manufacturer Model Number
Viscosity
Color
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Approximate Linear Coverage @ Bead Diameter
Fitting Connection
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Plexus Adhesives
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| MA300 | 30500 | 1.58 | Cartridge | 4 min. | 24 hrs. | 3,000 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |