Filter by
Length
Container Type
Maximum Application Temperature
For Joining
Shear Strength
Manufacturer
For Use On
Viscosity
Adhesive Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
For 3M Gun Model Number
RoHS
Minimum Application Temperature
Cure Type
Manufacturer Model Name
Mixing Required
Reaches Full Strength
Approximate Number of Sticks per Pound
Manufacturer Model Number
REACH
Elongation
About Structural Adhesives
More
Hot-Melt Glue Sticks
When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds. 3M glue sticks work only with 3M glue guns
Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.
| Mfr. Model No. | For 3M Gun Model No. | Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Color | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 11 lbs. | |
3M Scotch-Weld Glue | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3750 | AE II | 1/2" | 10" | 30 sec. | 24 hrs. | 350° to 385° | Thick Liquid | 1,900 | Beige | Wood | 14 | 0000000 | ||
| 3750 | AE II | 1/2" | 10" | 40 sec. | 24 hrs. | 350° to 385° | Thick Liquid | 1,900 | Clear | Wood | 14 | 0000000 | ||